Why all RAW files open as 0.1MP images

Help! Suddenly All Canon RAW files shown as small 0.1 MP images in ACR 8.3 on Mac OS 10.9 (rather than their normal 20 megapixel size). Even ones that I successfully edited before. This does not occure on my iMac running the same OS and using the same version of Photoshop/Bridge and ACR 8.3. It's like it is only see the embedded thumbnail image.

It's likely that you've inadvertently changed the Adobe Default Develop settings (which can be applied for specific cameras only). To check, take one of these "B&W" images into the develop module, press and hold the Shift key and the reset button at bottom right will change to "Reset (Adobe)"....click on it and the image should revert to colour. If it does, yes you've changed the default settings. To fix, go to Develop>Set Default Settings, then click on Restore Adobe Default Settings.

Similar Messages

Why won't files open in Camera Raw from Bridge?

I am trying to open files in Camera raw from Bridge but get the following message.
"Bridge's parent application is not active."
Both Bridge and CS5 are open and I have opened camera raw previously.
Any suggestions.
Cheers

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Nikon D800 can't open all RAW-files ending .NEF

Got a Nikon D800 and can't open all RAW-files ending .NEF Most of them no problem, but some I just can't.
"Could not complete your request because the file appears to be from a camera model" Thats not wight cause I can open like 90% of my .NEF files :/
Got latest Camera Raw (6.7)..Help please:/

Because many of the camera makers slightly alter their versions of their raw format whenever they release a new camera model.
Nikon does it, Canon does it, and also several other camera makers.
There is not a single version of NEF that all Nikon cameras use, nor a single version of CR2 for all Canon models.
Here is a list of supported cameras and the required ACR plugin needed to open the raw files.
Camera Raw plug-in | Supported cameras
Versions of ACR are specific to each version of Photoshop.
Older versions of PS cannot use the latest version of ACR.
You need to download the latest version of Adobe DNG Converter.
This will convert your newer D800 files to DNGs that can then be opened in older versions like CS5.
Be aware DNG only works on folders of files, not individual files. Select the FOLDER not a single file

Can anyone help me as to why my raw files in bridge are not showing as thumbnails as they normally do . I can seem to fix it

Can anyone help me as to why my raw files in bridge are not showing as thumbnails as they normally do . I can seem to fix it

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Canon 7d mark II raw files open error

Photoshop elements 12 will not open the canon 7d mark II raw files, from what I read elements are not going to upgrade there camera profiles anymore, so anything new your just out of luck? The support people have no clue.

Faq:
FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
more specifically:
Camera Raw plug-in | Supported cameras
in which you find that your camera requires the ACR 8.7 version
Camera Raw-compatible Adobe applications
in which you see that PSE12 can't, and that PS13 can with an update.
So what solution, since Adobe does not upgrade older versions? It's the free Adobe DNGconverter:
Use the latest version of the free DNG Converter (for Macintosh or Windows)
You can convert your files to the universaly compatible DNG format (the files will work with any version of the Camera Raw plug-in). See In depth : Digital Negative (DNG) for more information.
This standalone utility lets you batch convert whole folders of raw files to the DNG raw format that your PSE12 can read.
jazyjlb1 a écrit:
... The support people have no clue.

Delete file but not remove from disk kills Yosemite preview all RAW files dimension now 0 X 0?

Sorry to trouble you but this has never happened before so I need help.
I loaded 300 photos into LR 5.7
I deleted 200 of them.
But I asked LR not to remove them from the HD in case I might need them again in the future.
When I go into Finder, all the files are there showing 15M 18M whatever files size, but no preview. All the files show "dimension 0 X 0"
Preview won't open them saying "format not supported"
But I can open them in LR5 and CS6
I can even edit them, from LR5, including using plug ins.
I tried reboot. No good.
tiffs, jpegs all works find.
All RAW files are now not viewable in Preview / Finder, regardless of whether they are Nikon, Cannon, Panasonic, Leica
my system:
5KiMac 4GHz i7, 32 GB DDR3, AMD Radeon R9 3TB fusion drive and 4TB SATA Thunderbolt running under Yosemite 10.10.2
Please help.

Do you have a new camera?
I note that my D750 raw images need update 6.01 in Yosemite OS. Check this site- OS X Yosemite: Supported digital camera RAW formats - Apple Support
If your camera is listed then maybe you have corruption of the Yosemite install.

Why won't files open or save in email

I have been trying to open some important files that were emailed and they won't open. I am getting the blue and white pop up asking if I want to open or save and it won't let me do either. It did this the other day and somehow I finally got it open after shutting down the computer. Tried that this time and it won't work. Tried uninstalling and reinstalling adobe. It did not work. There is also an online website I use to complete and upload PDF file documents and it won't work either. What has happened? How do I fix?

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why won't files open in the space that the application is assigned to?

I have applications assigned to specific spaces, however, if I am in space 2 and I click to open an Adobe Illustrator (assiged to space 3) file, spaces will send me to space 3 but the file window will open in space 2 (where I was). I have to use F8 to view the spaces and drag it over to the assigend sapce. If i try to work on it in spaces 2 (where it opened) my pallets are blank. Any ideas?

Ah this is just because I haven't fully updated my bridge yet, but the solution still works fine
Date: Mon, 10 Oct 2011 13:25:37 -0600
From: [email protected]
To: [email protected]
Subject: Why won't files open in Camera Raw from Bridge?
    Re: Why won't files open in Camera Raw from Bridge?
    created by Noel Carboni in Adobe Camera Raw - View the full discussion
The video shows replacing a current DLL file with one from last year - the key issue being that the files found in the Bridge and Photoshop folders are DIFFERENT. Why would this be? I checked a PS CS5.1 installation myself and the files are already the same. Is there an illegitimate copy of Photoshop being used or something, causing these files to differ? -Noel
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3963527#3963527
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3963527#3963527. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Camera Raw by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why do several files open when I launch Pages and Numbers

Why do several files open when I launch Pages and Numbers

2139Mike wrote:
Why do several files open when I launch Pages and Numbers
Mike,
Any document left open when you Quit the application reopens when you restart the application. Rather like the jacket that I neglected to hang up when I came home last night. It's still lying on the chair by the door.
Jerry

Why are pdf files opened automatically in iPad email. I need to save the pdf file itself.

Why are pdf files opened automatically in iPad email? I need to save the pdf file itself, so I can re-read them for later. ANy fix. Some pdf files I send are saved as pdf files unopened.

I have no idea how an iPad works.
[topic moved to iOS subforum]

All RAW files suddenly said to need reprocessing

I am running Aperture 3.0.3 with OS 10.6.4 so everything is as up-to-date as can be. I upgraded from Aperture 2 within a week of Aperture 3 being released and all my RAW files were updated in the process. Since then, I have added several thousand more pictures directly into whatever the latest version of Aperture was at that time. My RAW files are all from a Nikon D40.
The last time I used Aperture (about a week ago) everything was normal, but today the program suddenly tells me this about all my RAW files: "This photo was adjusted using an earlier version of Apple's RAW processing"
Obviously this should be impossible for the several thousand of pictures that have only existed within Aperture 3 as they would have been automatically processed using the latest version. However, if I filter pictures by which RAW processor was used for decoding, every RAW file except the 6 new files I just imported to check (they correctly show RAW Decoding 3.0) shows that it was decoded with RAW Decoding 2.0.
If I push the reprocess button, my photos change slightly, becoming a little brighter, a little warmer, with a touch more saturation. I exported some JPEGs to compare to pictures I have outside Aperture and there is a definite (but subtle) change after reprocessing compared to my original edits done in Aperture 3. All quickbrush adjustments are available for all RAW files as well, which I thought was only possible if the file was updated to the latest processing...but I'm not sure about that.
I restored my library from a vault (updated about 1 week ago, unsure if before/after this issue began) and I get the same message. The only change I've made recently has been installing the Camera RAW update that came about in the past few weeks. Is it possible that made this suddenly start happening?
Of course I want to have the latest RAW decoding for my files, but I'm concerned that pictures I edited and exported months ago appear to have a different version of RAW processing than Aperture now wants to give my files. Anyone with a clue of what's going on or what I can do to troubleshoot this issue.

Aperture user since v1.0. Nikon D70.
You're not alone. This message has recently appeared on my entire library of D70 RAW images, excluding my two most recent imports.
At the same time, many precious, carefully hand tweaked images have taken on a very pronounced dark green colour cast (which renders them as completely useless). It seems that the more carefully the file had been tweaked, the more likely it was to have been affected by the dark green cast. I am extremely disappointed by this.
FWIW. Depending on their vintage my images may have been originally processed in RAW Decode v1, v1.1, v2 or v3. All images were reprocessed in RAW Decode v3 when Aperture 3 was originally released.
Reprocessing the images using RAW Decode Version 3 removes this colour cast but also creates images of a different pixel size! Previously they were 3024px by 1998px; after reprocessing they are 3008px by 2000px. This is the size that Adobe's and Nikon's own RAW processors produce, so the previous dimensions must be seen as Apple's mistake (I reported it as such when Aperture 1 was first released, so I suppose we should be glad that they've gotten round to fixing it).
This change in pixel dimension is covered in support.apple.com/kb/TS3114 which says that the change occurs after upgrading to Digital Camera RAW Compatibility Update 3.3. Of course, the release notes for Digital Camera RAW Compatibility Update 3.3 made no mention of this. And Apple seem to be playing the whole affair with their customary stone wall.

Can Olympus RAW files open in Lightroom mobile?

Can Olympus RAW files open in Lightroom mobile?

As I understand it, but I have not tried LR Mobile, you have to have the raw files on a real computer and then sync the smart previews from LR desktop to the iPad. I am still trying to get my head around a real use case for a non professional enthuasist photographer.

When i open a picture it opens at preview but "all my files" opens everything else with it , same happens with MS word when i open document every word document opens with it

When i open a picture it opens at preview but "all my files" opens everything else with it , same happens with MS word when i open document every word document opens with it

Hi MIXAYA,
Thanks for using Apple Support Communities. In OS X, by default apps will open with any previously opened documents opening as well. To disable this feature, select "Close windows when quitting an application" from System Preferences > General. To learn more, see this article:
OS X Mavericks: General preferences
http://support.apple.com/kb/ph13803
Close windows when quitting an application
If you quit apps with windows still open on your screen, selecting this checkbox prevents the windows from reopening automatically the next time you start their app.
Cheers,
- Ari

I want to buy a Canon 6D but will its raw files open in my Photoshop CS6 with camera raw version 8.5.0.236

I want to buy a Canon 6D but will its raw files open in my PhotoshopCS6 with camera raw version 8.5.0.236. Does anyone know, please

Camera Raw plug-in | Supported cameras

ACR (CS5 Bridge) not opening all RAW files

I upgraded to CS5 last week and I'm having a problem with processing some RAW files. If I select ALL the images in a folder in Bridge and right click to open in ACR it doesn't open ALL the images - there are missing images and I cannot for the life of me figure out why it won't open these images up. I've also tried to select one of those omitted images in Bridge and right click to open up in ACR it still won't open it but if I double click it'll open it in ACR but only via PS. I don't get why it won't open some files especially as they're shot with exactly the same camera - any ideas or has anyone else noticed this happening? Thanks in advance!

amorphia wrote:
…Before renaming ACR opens everything selected - once I've renamed the images, ACR only opens some of the images…
Make sure you have renamed the files correctly, i.e. with the appropriate three-letter extension and with no illegal characters in the file name.
If the files are correctly labeled, you might want to purge the cache for the folder through the Tools menu in Bridge.
Wo Tai Lao Le
我太老了

Why all RAW files open as 0.1MP images

Similar Messages

Maybe you are looking for