Why all the errors appear after some hours on pc

Why all the errors appear after some hours on pc             

Thanks for reply but the 2 HDD oki think the PS is 200 W that made that problem ?Or from TEMP ? i made it more able to flow the air  & become better now     

Similar Messages

  • How to identify what are all the errors appears in process chain,

    Hi all,
    i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
    thanks
    pooja

    Hi Pooja,
    Errors in monitoring:
    SID error
    Reason: If the corresponding master data is missing for the particular transaction data.
             1. Check for the load timing for the respective master data, if it less than an hour  then make the request red and repeat the ip.
             2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
             3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with ‘Single as postfix’.
             4. Goto ‘data selection’ tab and change the range.
    Tip: change the last 4 digits for from to ‘0000’and the last 4 digit for to     ‘9999’.
            5. Repeat the ip.
             6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
    Note: IF PSA is present never make the request red rather delete it.
    Replication error
    Reason: Data source replication Failed.
             1. In order to handle this error you should be known to IP, info source and source system.
             2. Goto RSA1, find the data source in the source sys tab.
             3. Right click on the data source and replicate it.
             4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
             5. Delete the ‘red’ request from the target.
    Update R not supported
    Reason: The corresponding initialization flag for the ip is lost.
             1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
             2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
             3. Goto update tab and select ‘Initialize delta process’ try going for ‘with data transfer’.
             4. Reschedule the IP.
    Duplicate Record Error
    Reason: Duplicate error records for the loaded master data.
             1. Goto info package via header or via RSA1.
             2. Goto ‘processing tab’ and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
             3. Do remember to change the ip settings back to the original once after the second step.
    ODS activation failure
    Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
             1. Goto ‘maintain variant’.
             2. Check for the ‘QM’ status of the requests in the target they should be green.
             3. Then click the ODS activation tab.
             4. In the screen which appears put the requests for which ODS activation failed.
             5. Activate these and keep on refreshing them until status reverts from green,
    Remember to refresh these requests one at a time.
             6. If requests are red then delete them from target.
             7. Reschedule the IP.
    Note: Never Try activating ODS manually if it is Y1.
    Aggregate Rollup error
    Reason: No aggregate found for the respective rollup.
             1. Click on the variant in which the error occurred.
             2. Goto chain tab and copy the variant and instance.
             3. Run the nestle provided program YBW05.
             4. Put in info in there and put the status as g – ‘green’.
             5. Execute and refresh the status.
    Lock issue
    Reason: The same ip is been locked by other user or may be used by other process chain.
             1. We can see the locked entries and in the transaction SM12.
             2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
             3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
             4. In the box appears select update in the background.
             5. And the manually update the failed IP’s by selecting manual update in the context menu.
    Alfa confirming value error, Time conversion error, Chain didn’t start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
    Reasons:
      Alfa confirming error: Data format mismatch.
      Time conversion error: Date, time format mismatch.
      Chain didn’t start: A scheduled chain didn’t triggered at the prescribed timing.
    -For all the above error we have to raise a ticket.
    Idoc or TRFC error
    Reason: An Idoc is been stuck somewhere.
             1. Reload the Master Data manually again from Info-package at RSA1.
             2. Release the Idoc.
             3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
             4. In the Screen if the status is ‘Transaction Recorded’ it means its stuck goto edit and click Execute LUW or press F6.
             5. If status is ‘Transaction executing’ then it means its fine wait.
             6. Or raise ticket.
    Error Due to short Dump
    Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
    Process terminated in the Source system.
               Reason: Sometimes we face that a load has failed due to job Termination at Source System.             
          This happens due to unavailability of the source system or some connectivity problem between source and target systems.
    1.      Make the request red.
    2.      Delete the request from the data target.
    3.      Reschedule the ip.
    4.      If still the job fails raise the ticket.
    And also check in following links:
    Process Chain Errors
    /people/mona.kapur/blog/2008/01/14/process-chain-errors
    Common Process chain errors
    For Data Load Errors check this blog:
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    Pls assign points if it helps u,
    Thanks & Regards,
    Madhu

  • TDMS file error occurs after several hours

    I have a compiled LabVIEW 2010 SP1 executable running on a Windows 7 PXI computer that is occasionally producing the following error message:
    "LabVIEW: LabVIEW could not load the TDMS file component.
    The top-level VI <my VI's name> was stopped at unknown on the block diagram of  <my VI's name>"
    This program is interfacing with equipment under test over a number of PXI cards and ethernet connections. It alters inputs to the system based on script commands, while receiving and displaying outputs. During testing, state changes are sent to a TDMS file. The system can run for hours but will usually produce the above error message... eventually.
    The error seems to indicate that a LabVIEW file is missing, but the TDMS files are being created, so I may not be understanding the meaning of the error. Does anyone know what the actual cause(s) of this error message are?

    The code writes to the TDMS file using the "TDMS Write" VI from the TDM Streaming Palette. These write VIs are located in 12 different sub VIs in a program loop within my main VI. Every 50ms they execute, service the I/O,  and write to the TDMS file if data in the particular sub VI has changed state. Some are writing floating point numbers, most are writing strings. There are about 750 total channels being written. I know that posting the code would be more usefull than describing it, but I think posting the source code would be frowned upon by my company. There are over a hundred custom VIs and external hardware connections that are required to effectively run this code anyway.
    Regarding timing, there doesn't seem to be a particular amount of time that has to pass before this issue occurs. I was given a screenshot that shows the error occured after 11 hours of running. I was also told that the same error had occured about 6+ hours into a test once. I can say that this error doesn't seem to occur quickly, as in within the first hour or so. It seems to require long duration tests.

  • Hi this message appears after 2 hours downloading Mavericks : an error occurred while extracting files from the package "mzps4135638417199433253.pkg"

    Hi this message appears after 2 hours downloading Mavericks in App Store :
    an error occurred while extracting files from the package "mzps4135638417199433253.pkg"
    Same with "CMD + R"
    Help...

    It sounds to me like your Internal Hard Drive is failing.
    I recommend you buy a new one, that is a good candidate for replacing the old one, but install it in an External enclosure and Install a fresh Mac OS X on it from the DVD. You can boot your Mac from any attached drive.
    The new System can be used to get some work done, check your emails, and takes the pressure off resolving this immediately. You can also attempt to salvage files off the old drive if needed.
    Once things seem to be working, then move the new drive inside the computer. Failures at this point may be due to bad cable, which has been a problem in some of these MacBooks.
    Use security erase, write Zeroes, one pass, to re-write every block on the old drive. Any block discovered to be bad will be replaced with spares the drive holds in reserve for this purpose. If more than 10 blocks are pared on one pass, "Initialization Failed!" will be the result. Although you can try the erase again, there is some question whether you want to trust this drive with your precious data.

  • How to handle TDMS -2519 error that appears after some time?

    Dear all,
    I am having two compactRio devices (cRIO-9074) that are applied for data logging and control. As is convenient, one deterministic loop handles the data acquisition, while another loop handles the data storage.
    The data storage loop basically creates a new TDMS file per data set that is subsequently stored to the disk.
    The whole software operates as expected for some time (at least one day without any issues), but then I get a File I/O error -2519 that is thrown by TDMS open. This error occurs after some time on both compactRio systems. How should I handle this error properly and what may be the probable cause?
    Upon system restart the error disappears and the system continues logging. Therefore, when having this error, I restart the system automatically, but this is to my opinion no proper solution. The fact that the error is cleared upon system restart, seems like it is a resource problem as outlined in: http://forums.ni.com/t5/Real-Time-Measurement-and/2519-error-trying-to-create-a-TDMS-file/td-p/26546... There they recommend using the FPGA programming mode to save on resources. However, I would like to continue using the Scanning Mode Interface instead. To better dedicate the processor resources, I changed the execution options of the different loops and gave Priority to the data acquisition and data storage loop. I also distributed the processes in different Execution Systems, to optimally divide tasks within the real-time processor.
    When I manually neglect the error (just clear the error in the data storage loop), the issue remains for the following data sets that need to be processed. So once the error is thrown, it reoccurs upon trying to store each subsequent data set.
    I also consulted http://forums.ni.com/t5/Real-Time-Measurement-and/tdms-2519-error/m-p/2569381/highlight/true#M13920 where the same error is reported and the solution is to update a .dll file in the installation. However, the installed software in my case appears to be okay. Also in that case, the problem occurred immediately, while in my case the problem arises after some time. Again this indicates towards a resource issue.
    Can you please provide me with some possible solution to overcome this problem? I am looking forward to your opinions. Contact me if anything is unclear within my explanation, or you need additional information.

    Hi gielvdbroeck,
    Good job for the perfect description and for the well researched topic!
    The first thing that comes to my mind is to Format and reinstall the software on the cRIO. This will make sure that you have a clean installation and there is no corruption in the OS.
    One more thing to get into account is the memory. If you do not have enough memory where to store the file it's possible to throw this error. 
    Best,
    Bozhidar

  • I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing.  Pls adv how I change this to my new apple Id.

    I created one apple I'd when I started using the iPad.  After some days, I had to create a new apple id
    as there was some problem with the first one. Now at some places still my old apple Id is appearing.  Pls adv how I change this to my new apple Id.

    Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
    The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
    To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad. 
    Go to Settings->iTunes & App Stores->Apple ID->Sign out.
    Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

  • So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date, is there a way to get it all back?

    So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date,and it also kept the notes from after the backup. The "reset all settings" option clearly says no loss of data or media, so I don't understand why some stuff got deleted. My question is, is there a way to get it back?

    If you still can find a recent backup listed in iTunes/Edit/Preferences/Devices, use this one to restore from.
    If there are no recent backups listed, your data is gone. Only if you included the iTunes backup folder into your computer backup routine, you could be able to restore this folder and find one of your latest backups listed again.
    iTunes: About iOS backups

  • After upgrading 3.6.7, in "google image search" all the results appears in one page, I just need to go back to the previous way of search : page after page.......??

    After upgrading 3.6.7, in "google image search" all the results appears in one page, I just need to go back to the previous way of search : page after page.......??
    where can I adjust this option ?? I tried in IE, the search way is normal as in past..
    == This happened ==
    Every time Firefox opened

    I believe this to be a browser issue, not a google search results issue, and here is why:
    having updated Firefox only yesterday, I visited google images searching for pancakes.... interestingly, I have the NEW image results (yuck) on Firefox 3.6.8, I have the OLD image results on IE8 and Opera 10.53.
    When I use the 'switch to basic version' in Firefox 3.6.8, indeed it DOES revert to the new format next time I image search (in Firefox).
    For those of us who prefer the OLD image results page, I guess we will just have to switch browsers for google image search.
    Now I'm off to research how to get rid of the UGLY FFox sidebar.

  • After migration the MaxDB 7.6 down the performance after some hours of use

    Hi,
    After many tests i put the version of MaxDB 7.6 in production, after some hours of use, now i'm getting a strange slow down in performance of the database, looking at the knldiag file i cant find anything that can show me the reason.
    any idea how to check what happen?
    thanks
    Clóvis

    Hi, Oksana,
    I think that notes are only for SAP customers, right? because i'm not a SAP customer, there is a way to you be more specific about what i need to check without having access to that notes?
    look on wrk directory i discover that the files QUAL.dmp and comseg.dmp are updated when the system get slow, i checked the knldiag but dont have any error,
    any idea because these files are generated?
    best regards
    Clovis

  • After I make a trailer or movie on my Iphone 4S and try to save it to the camera roll, I get a message that "an error occurred during export".  The message appears after the piece has seeminly finished exporting.  What am I doing wrong???

    After I make a trailer or movie on my Iphone 4S using IMovie and try to save it to the camera roll, I get the message "An error occurred during export."  The message appears after the piece has seemingly finished exporting.  What am I doing wrong????

    I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
    Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
    Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

  • Why all the domain values disappeared from ESB control after chinese map?

    hi,
    when I creating a domain value in chinese in the ESB control and confirm it, After I restart the
    soa service, all the domain values that I created before and the one in chinese disappeared.
    Although the domain values in english desappeared, in the code they are still can be used.
    But the domain values in chinese can not be used.
    All the maps(both english and chinese ) are in DVM Repository.
    Can you help me ??? Why all the domain values disappeared from ESB control ?? thanks
    wanglinli

    two collegues of mine ran into a similiar problem. Their ESB console seemed empty as well.Until one of them let the console open for about 10 minutes and the services/system re-appeared.
    Indicating that when the services do not show up could also be caused by a serious performance glitch or the services are calling external systems which time out.
    Another option is to wait for a few minutes and see if your services etc show up again.
    I don't know where this performance degradation is coming from though. The only thing I noticed is that the ORAESB schema ( advanced install ) is installing al of its objects in the USERS tablespace and that most ( almost all ) tables do not have any indexes / pk / fk's on them.
    Maybe one or two indexes could speed up the ESB repository considerably.
    Dave, In the upcoming 10.1.3.3 release is the repository in any way altered? Default tablespace? PK/FK and/or extra indices on certain tables/columns?

  • I downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm

    i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi  i try all the ways to turn it on but it didnt sucsses

    roaminggnome 
      thanks for helping but i didnt know that is the downgrade is forbidden  and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> 

  • When i download any file it start in a second but when i pause the downloading file & after some time when i open it amessage flash 'download error' source file could not be read please try again later or contact the server administrator.

    when i download any file it works frequently and downloading start in a second but when i pause the downloading file & after some time when i open it,The downloading not start proper and after some time a message flash 'download error' source file could not be read please try again later or contact the server administrator.

    I downloaded the Microsoft Autoruns package and ran it.  There are no programs in the LSA Providers tab, and Apple's Bonjour is the only program in the Winsock Providers tab.  I also did the "netsh winsock reset" and rebooted.  It didn't fix the problem.  Any more ideas?

  • Why new contacts are not appearing after some time?

    I Am using iPhone6, iPad New and iPad mini. The contacts which I saved in iPhone are not appearing after some time. I don't know whether it is related with synchronisation of other devices. Please help me if you know the reason.

    Hi, 
    Have you checked the filtering option in contacts? Open contact menu button > filter. Perhaps you have a filter hiding the contacts. 
    What are your thoughts about this forum? Let us know by doing this short survey.

  • I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    Are you trying to update via wifi or connected to your computer?
     Cheers, Tom

Maybe you are looking for