Why always having to render?

Hi. Using a JVC GZ-HD7 with FCE4 in full High Definition. I find I have to render after every edit before I can play it. Any idea what I'm doing wrong - or is this just how it is? FCE EasySetup config is Apple Intermediate Codec at1080i50 at 25fps and ItemProperties are VidRate 25fps FrameSize 1920x1080 Compressor Apple Intermediate Codec DataRate 8.7MB/sec PixelAspect Square FieldDominance None Alpha None Composite Normal. Thanks. Kev

Theoretically 1920 is better, but you have to see what the chip aspect ratio is in the camera. If it's 1920 then you'll get no loss by compressing to 1440, though the full 1920 will be marginally better. if the chip is 1440, you will actually get reduced quality because the image is being scaled up to 1920.
If you keep rendering you're losing any benefit of 1920 because the image is being scaled down to the 1440 format that would have been done in the camera when you shoot with it.

Similar Messages

HDV Always having to render?

Hello, I--after over two years--got a project we shot on a difficult JVC HDV U100 format digitized and onto a hard drive. I am very excited to get this project underway. My problem: when I drag the footage onto the time line the red line appears that prompts me to render. This is with no effects and nothing done to the footage. Will I have to render always? I hope not. Is there any way I can edit it in a lower format then bump it up to the HDV? I do not have the capibilities to re import, as the process to import required $500 of renting the camera for a few days. Let me know if I can start editing without having to render every bit of footage when I drag it into the time line.
thanks,
Johnny

#28 Having to render every clip in the timeline
Shane's Stock Answer #28: When I put a clip in the timline, I have to render it before it will play. Why?
Your clip settings MUST match your timeline settings. If you have DV/NTSC material, you need a DV/NTSC timeline. The frame rate, audio rate and dimensions (4:3, 16:9) all need to match exactly. In Final Cut Pro 6, this is easy, because when you drop a clip into the timeline, it asks if you want to set up the timeline to match the settings of the first clip you drag into it. Click YES and you are ready to go.
However, in FCP 5.1 and earlier, it is a bit trickier.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu.
Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured.
Shane

Always having to render

So I imported 3 .mov files to FCP 6.0.6 and every time I move them or try and over lay something over them like a title or anything I have to render. Their has to be a way to not half to do that right??
Thank you
Nally

Meto! These are all bastardized versions of video formats.They're close to standard definition. The closest format in Final Cut is DV. For the US that's 720x480 using CCIR601 pixel aspect ratio. Put your media into a standard DV NTSC preset. Say no when it asks to adjust. Manually fix it in the timeline and render.
Or use something like MPEG Streamclip to convert this to QuickTime using the DV NTSC codec at the correct frame size and frame rate and audio sample rate.
Message was edited by: Tom Wolsky

PriceSlider content item always having a fixed value for 'sliderMax' and 'sliderMax'

Hi,
I am using ATG-10.2
I am trying to create the navigation with invoke assembler call (to contentCollection '/content/Shared/Guided Navigation') Everything goes well, except the price slider.
sliderMin and sliderMax values are always having fixed values, even though there are products with higher prices than this range.
Ex: This is how my content item looks like
{enabled=true, @type=PriceSlider, name=Price, filterCrumb=com.endeca.infront.cartridge.model.RangeFilterBreadcrumb@d45e275, sliderMax=1500, sliderMin=0, priceProperty=sku.activePrice}
But in this search result, there are product which have prices even beyond 10,000
I hope that the properties I am accessing are correct (contentItem.sliderMin and contentItem.sliderMax).
Does anyone has seen this before??
Any solution to overcome this issue. ??
NOTE: See the attached images here.
https://qa.endecacommunity.com/questions/2429/priceslider-content-item-always-having-a-fixed-value-for-slidermax-and-sli…

If you want to get better help post a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html].
Most of the code you posted is not relevant to your question/problem.
Also you shouldn't name a JTextArea object jDescrLabel ?
That's confusing for someone else reading your code.
Why not use jDescrTextArea ?

When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, why not 3G ?

When I try to upgrade and install to iOS 5.1, error message prompt "operation stop running". I have tried several time but failed. Also, would like to know why always need to have wifi access in order to upgrade the version of iPad iOS, what is the purpose of 3G then? This is really nonsense using wifi + 3G iPad. need help ! Thanks.

The file is too large to download via 3G. There is a 20MB limit with 3G. The purpose of having 3G is that you have internet access everywhere and do not need to be near a WiFi hotspot or network.
Not every single thing that you do every single minute of the day on the iPad involves downloading files larger than 20MB. You can surf the internet all day long sitting out in a park somewhere with 3G - but not with a WiFi only iPad - unless you use a hotspot with it.
Try turning off your firewall and anti virus software while you try to download the iOS update.

Apps always having to be updated

Always having to update apps. It seems the more I update them. The more the origingal program is messed up
And it gives more room for more advertising.
Started deleting more and more apps.
Why do I have to have so much advertising. Know peope have to make money but its like the end comsumer has no rights anymore.
Everything with adds are always turned on.
Why shouldn't they be turned off and if we want them on we can turn them on.
We are having our information sold.
It needs to stop.
If we need to pay for all the apps, Why have them. If we need advertising all the time. why not get rid of this phone.
I can Live without it.
Can you.

If I paid for everything on the computer or Iphone I would be broke.
Airtime is too high now.
What difference does it make if you are talking on the phone or texting or on the internet.
Its all airtime.
All the money that is spent on the internet or apps to just play on the computer or phone.

I always have to render video?

I recently digitized video and when I edit with the video, I have to render each shot that I place on the timeline? Is there a setting I need to change on my computer?
Thanks
Message was edited by: ameditor

#28 Having to render every clip in the timeline
Shane's Stock Answer #28: When I put a clip in the timline, I have to render it before it will play. Why?
Your clip settings MUST match your timeline settings. If you have DV/NTSC material, you need a DV/NTSC timeline. The frame rate, audio rate and dimensions (4:3, 16:9) all need to match exactly. In Final Cut Pro 6, this is easy, because when you drop a clip into the timeline, it asks if you want to set up the timeline to match the settings of the first clip you drag into it. Click YES and you are ready to go.
However, in FCP 5.1 and earlier, it is a bit trickier.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu.
Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured.
Shane

HT1222 Hey , why always when i want to update my Ipad to ios 6.1.3 at the end tills me that the update was failed , its always please if you can help me and thank you

Hey , why always when i want to update my Ipad to ios 6.1.3 at the end tills me that the update was failed , its always ,please if you can help me, and thank you.

Try disabling your firewall and antivirus software and see if that helps - if you are trying to update using iTunes on your computer.

I don't recall always having to enter admin. name and p/w when doing updates. Is this req't only for certain software. I am a bit paranoid now with the Mac Defender lurking about.

When completing the software updates I can't remember always having to enter administrator name and password. Maybe it's just been automatic on my part but now I rethink the process when I am asked to enter this info since the Mac Defender malware became an issue with Mac. Just wanted to know if this procedure occurs with all software updates or is it selective based on the type of update? This time is concerned Airport. Thanks for any insight.

Are you running as an Admin User or non-Admin? ie. have you set your Mac up with multiple user accounts - one as an Admin and one as a Standard user?
For security, you are better off having an Admin user account that has Admin privileges and a Standard user account that you use from day to day with standard privileges. When you install system updates you will be required to enter an Admin name and password, and any software that needs access to the system will require an Admin name and password, but anything that you install just for your user account that doesn't require total system access will be able to be dragged and dropped into your Application folder as per usual.
MacDefender runs in a web browser - that should be a huge red flag! If you see a warning when you are running Safari or another web browser close the browser window or Force Quit it. (under the Apple Menu => Force Quit...) In Safari Preferences untick Open "safe" files after downloading. (It will prevent an installer from automatically launching if something nasty is downloaded to your machine.) MacDefender and its variants attempt to trick people into installing stuff that will compromise their system. If something pops up unannounced on your machine that you didn't download, close it and delete it.
This article goes into depth about the MacDefender Malware:
http://rixstep.com/2/20110610,00.shtml
The salient points are summed up in the "Recapitulate" section at the bottom of the article: It's a bit Hipster Geeky.
"To Recapitulate
As recounted elsewhere, the Mac Defender attack is a well thought out attack that may have taken months to get together. The first step was to compromise websites of eejits, hack their FTP accounts, and upload dynamited files to their servers.
Then followed the Google whacks which led to people clicking on links they'd provided at the sites they'd hijacked.
And then finally they uploaded Mac Defender so people would get hit by it. And the purpose of Mac Defender is to scare you into thinking you're infected so you pull out your credit card.
Then the hackers run away with your credit card info and buy mink coats and chinchilla coats or whatever they want.
But staying clear of Mac Defender is really easy and doesn't require any AV software.
Don't ever open anything you didn't want to download.
Turn off JavaScript when accessing any Google Images site.
Make sure you don't have Safari set to automatically open downloads."
I'd add, keep your software up to date. Especially Adobe's Flash Plug-in as this is no longer supplied in system updates by Apple and could become an attack vector in the future. Always download software from reputable sources - ie. when downloading the Flash plug-in, get it from Adobe directly - don't follow a link from a website that tells you your version of Flash is out of date.
Enable your Firewall in System Preferences => Security => Firewall. Click on the Advanced button and Enable Stealth Mode too.
Also under:
System Preferences => Security => General.
Disable Automatic Login. Require a password to unlock each System Preferences pane. Use secure virtual memory. Automatically update safe downloads list.
Educate yourself.

Can I edit between Premiere Pro & After Effects without having to Render??

Im trying to edit these videos my method was look through the long videos and select clips I want and export them so I could work on AE..
The thing is that the videos loose a lot of quality when I render them on export.
Yes I know I could use After Effects and cut the clips in there but the problem is that it doesnt really cut the clip it just shadows out the rest of the video.
Light Blue: Section I want Shadow Blue: Rest of video
This is bothering me when I try to use time remapping..
or is there any way to actually chop it off??? so that there wont be no shadow..
or is there any way to work between them withouth having to render..

The thing is that the videos loose a lot of quality when I render them on export.
Then you are using wrong settings, plain and simple.
This is bothering me when I try to use time remapping..
How so? Nothing stops you from adding additional keyframes at the trim marks, pre-compose the layer or whatever.
Mylenium

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partially.

Yes, I know. I have been working with HDV for some time. I am wondering why it doesn't render when it needs to.. the red and bright-green lines are above, and I've set the render settings such that ANYTHING I highlight and hit apple-R will render. But its not rendering at all.

I lost my iPad 3days ago. I tried to use "find my iPad" but always"off line"Idon't understand why always"off line" and how Ican get back my iPad!

I lost my iPad 3days ago. I tried to use ”find my iPad” but always”off line”Idon't understand why always”off line” and how Ican get back my iPad!

Two possibilities:
1. Maybe it's not turned on.
2. Maybe the iPad is wiped (setup as new)

Hi ... i want to ask why i can't download (whatsapp,skype,faceboo)on my iphone ???? and why always appear message my password error when i want doing download ??? if my password error i can't sign in here !!!! what's the problem???

hi ... i want to ask why i can't download (whatsapp,skype,faceboo)on my iphone ???? and why always appear message my password error when i want doing download ??? if my password error i can't sign in here !!!! what's the problem???

Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

HT1689 On the new version of iTunes the shuffle button and replay buttons appear to have disappeared on the genius tab and am always having to listen to shuffled songs now :( how can I stop this?

On the new version of iTunes the shuffle button and replay buttons appear to have disappeared on the genius tab and am always having to listen to shuffled songs now :( how can I stop this?

It appears from many other posts that the " Keep This iPod in the Source List" function isn't included in iTunes 7 unfortunately. You can leave your feedback on it's absence at this link: Apple Product Feedback
You can check out a workaround at this link which may help out for now: Create ready-to-sync playlists for Shuffles in iTunes 7

PS CC 14.2.1x64 Why always have to sign in ?

PS CC 14.2.1x64 Why always have to sign in ?
What if my network is down, how am I supposed to get any work done??!!

The problem is not that he can't sign in. The problem is that he has to keep doing it. What the real issue is in these cases should be fairly well established by now.
http://forums.adobe.com/thread/1439164?tstart=0
Try the solution in post # 2 first.

Why always having to render?

Similar Messages

Maybe you are looking for