Why am I disconnected?

Hi.
While doing my project, i encountered an error.
When i sent an request to my server via DataOutputStream, my server is able to receive the request successfully. However, after sending the request successfully, i will be disconnected to my server.
Why would this happened? By the way, i'm using a socket connection; StreamConnector.
Please help. Thanks!

Similar Messages

Why if i disconnect my external drive, i cannot create a new project,

why if i disconnect my external drive, i cannot create a new project, I've got, message : the operation couldn't be completed cannot allocate memory,
what i want is to create m "scratch disk" on my internal hard disk.

It works i reinstalled it properly and repaired permissions too. but how come now it doesn' t display h264 files before to have transcoded them. Yesterday i had h264 displayed immediately

Why I get disconnected while calling after 3 minutes?

Why I get disconnected while calling after 3 minutes?

I wish I could put 1 more quarter and solve the problem. And yes, it happens in every call that goes beyond 3 minutes, local or international. To make it worst, I bought an iPhone 4 for my wife and has exactly the same issue, we are both from the Philippines. Thinking that they might be selling us over here the over runs or defective gadgets to my surprise my sister in law who lives in Texas is experiencing the same issue. I was looking in the apple store for support and found out that there is a batch of iphones that came out with that issue and that needs some kind of fix. The problem is that apple endoreses you to your network provider and here our network provider does not know what to do.. Have you heard of this fix? Kindly advice

Why would iSight "disconnect" from the computer during iMovie recording?

I was just in the middle of recording a song, got to around 7 minutes when all of a sudden the iMovie recording panel went to blank with a big red sign saying "NO CAMERA CONNECTED". When I went back to the little drop down menu to record and selected "iSight built in" it allowed me to record again.
What could cause this? I am running very low on disk space ATM, somewhere in the region of 200MB left until I transfer all my recordings from today onto my external, could that have something to do with it? Maybe not enough virtual memory space left to run the camera?
Although in fairness I have 2GB of RAM and nothing else is running except one window in Safari (with only text) and a youtube window in Firefox...
Anyone know? And is there any way to prevent this from happening? I assumed since iSight is built in it couldn't "disconnect" from the machine, and in the middle of filming? Seems very odd...

Insufficient disk free space can certainly give trouble:
http://docs.info.apple.com/article.html?path=iMovie/HD/en/im37.html
With only 200MB left, you definitely need to free up some space-think 10s of gigabytes free if possible:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1968.html
If you need still more space, some of the ideas from the 10.6 Help version of this file be helpful:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8358.html
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Why is iChat disconnecting me after a while?

So I leave my computer for about 20 minutes...and iChat is disconnecting me. Is this normal? I couldn't see anything in the preferences to change this. Is there a way to fix this? I'm running Lion.
Thanks

Hi,
In System Preferences > Energy Saver have you got the Mac going to Sleep at that time. ?
If it is it will close all Network Connections.
When the Mac Wakes it should log you in again (Although sometime the Apps restart faster then the Network gets re-established)
If you mean the Buddy List changes to Away after a 10 minute perior of being Idle, change the setting in iChat > Preference > General Section that refers to this (Bottom of the top section).
10:30 PM Monday; August 1, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why my MacBook Disconnect from the Internet?

When I do something like playing a downloaded game, my Internet disconnects. The other devices in my house work fine, but my MacBook does not. I am using a Mac( Version 10.6.8) without Snow Leopard. Any advice?

Hello, supremedsi!
The following article has some useful information that may be relevant.
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
Best regards,
Allen

Why CompactRio always disconnect from my host after deployment?

I have the following program that I try to run as a real time program in the compactrio 9002:
The problem is that always that I try to run this program without any debugging tool the compactRio disconnects from my host and I have to reset it. But if I use the "HighLight Execution" tool it works perfectly (except for the fact that It is really slower) doesn't show any error.
Does anyone know what am I doing wrong?
Thanks in advance,
Tito Coutinho Melco.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Why would mac disconnect from a wireless printer used for years?

The printer used is a Brother, and the reports show that the WLAN is ok and the network configuration is all set up. restarted printer and computer. Deleted printer and tried to add it again and Mac won't do anything. connection with the printer is lost.

Hi,
I'm not sure about the cause of your problem and I'm no expert, but since you only seem to have trouble when you awake the mini, let me give you a few ideas...
On the D-Link Home/DHCP: what is the lease time of the DHCP server? If it is short, try setting to 1 week. Maybe your lease expires while your mini is in sleep mode and then your mini can't get a new IP since it is already "connected"?
On the D-Link Advanced/Performance: what Preamble Type is selected? Short Preamble has given me trouble in the past, so try changing it to Long Preamble, which seems to work better with Macs.
My Mini is connected to a D-Link DI-624 and it has always worked like a charm, but I don't put my computer to sleep for long periods of time (couple hours at most), so I never experienced that problem.
Good luck!
Guylaine
Mac mini Intel Core Duo 1.66 GHz 512MB DDR2 SDRAM Mac OS X (10.4.8) G4 Digital Audio Mac OS 9.2.2, iPod nano 1GB, iPod nano 4GB

Canon PowerShot SX280 HS disconnects while transferring photos

I have a Canon PowerShot SX280 HS. I can connect it to wifi. It finds my iPhone and works well with the app.
It finds my iMac and it connects: software starts, transfer of images starts, but then the camera is disconnected suddenly, message:
"The camera has been disconnected. The software will now close."
I don't know why it gets disconnected.

Hi
I have recieved a responce from Canon, they asked me to download and install this version:
http://support-my.canon-asia.com/contents/MY/EN/0200234102.html
Setup instruction
1. Download "ibxm-inst-1-1-0-17-u01-9l.dmg.gz" from the download page.
Save "ibxm-inst-1-1-0-17-u01-9l.dmg.gz" to a folder of your choice on your computer.
2. Double-click "ibxm-inst-1-1-0-17-u01-9l.dmg.gz".
After decompressing the file, "ibxm-inst-1-1-0-17-u01-9l.dmg" will be created.
3. Double-click "ibxm-inst-1-1-0-17-u01-9l.dmg". A drive named "IBXM_INST_11" will be automatically generated on the desktop.
4. Double-click the "IBX11INST" inside the "IBXM_INST_11" drive.
5. Follow the on-screen instructions to complete the installation.
But it did nor change anything, I then disabled my firewall, and after that I could download pictures.
I have to run wirh firewall so there have to be a differen solution.
/Henrik

JDBC adapter disconnects, if there are no message processing for 2 days

Hi All,
I have sender JDBC adapter configured, which polls messages every 3 mins.
XI is constantly polling the database (SQL Server) and since there are no messages on weekends, after a certain interval, it disconnects... giving a null exception.
I have checked the advance option "Disconnect from Database After Processing Each Message". still it is giving this error. I am on SP 12.
Can someone please let me know, what could be the reason of this null exception. why does it disconnects if there are no message processing for a long interval.
Any help would be appreciated.
Regards,
Amit

It means we don't support that file type for doing imports. It sounds like a reasonable request to [add to the Exchange|sqldeveloper.oracle.com] though.

Cant restore backup as ipod disconnects

Hi. I took a backup of my ipod through iTunes and saved on Laptop. I factory reset but I cant restore backup to ipod as I get a pop up error "ITunes could not restore the ipod 'name' because the ipod disconnected". Has anyone any idea why it is disconnecting or how to stop it? Many thanks.

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another USB port
- Try another cable
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Try on another computer to help determine if you have a computer or iPod problem
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

License Manager Disconnection

Hi all,
first of all congratulations for this great forum. I have Sap B1 version 2005 sp1 pl:12 and I am experimenting cuts with License Manager. I have no network problems and usually the clients connect without any problems but sometimes all of them get disconnected and I have to restart license manager. Once I do so all clients connect properly. Do you have any idea why I get disconnected?
Thanks a lot for your help.
Regards.
Ruben Hernandez

Ruben,
Do you have an add-on that is getting disconnected or simply the Business One clients on user workstations that are getting disconnected? Since SAP Business One 2005A and 2005A SP01 use a port number to connect to the License Manager and the default port it uses is 30000, I would check during the disconnect times that another application is not trying to use port 30000. If, during the install of the License Manager, you changed the port for the LM to use to something other than 30000, again, verify that the LM is the only application using that port. Other than that you may want to contact SAP Support.
Also, the forum you have posted your question in is for questions relating to the SAP Business One SDK. The question you have posted may be in regards to the Business One application itself. You should post non-SDK related questions in the SAP Business One Discussion Forum.
Eddy

E1200 Disconnects upon second logon

My other problem I'm having getting my E1200 to work is this; I'm connected wirelessly with an N-adapter to the router, my roomate is connected directly with an Ethernet cable and to the modem. Whenever he logs ons or logs off from internet I GET DISCONNECTED! Its very frustrating. At first I kept wondering why I would get frequent Disconnects, until I matched exactly the times he would log on or log off. I've never seen this type of problem before in my previous router? Any suggestions would be appreciated, thanks.

mcbob wrote:
My other problem I'm having getting my E1200 to work is this; I'm connected wirelessly with an N-adapter to the router, my roomate is connected directly with an Ethernet cable and to the modem. Whenever he logs ons or logs off from internet I GET DISCONNECTED! Its very frustrating. At first I kept wondering why I would get frequent Disconnects, until I matched exactly the times he would log on or log off. I've never seen this type of problem before in my previous router? Any suggestions would be appreciated, thanks.
Hi there. Try to check also if the cable connection is correct. But best if you can provide here your network info - your ISP, modem brand and model. Modem should go to the internet port of router and the wired pc to one of the ethernet ports of the router. If it is the other way around then that explains it why you get disconnected when the other pc is on because the router is acting up like a switch and it can utilize only the ip address of the modem one at a time.

Smart Watch 3 keeps disconnecting from phone

My swr50 keeps disconnecting from my motoG phone. I haven't figured out the circumstances for this...it seems random...I realise that I haven't had any notifications for a while, and none of the "OK Google" stuff works.My phone app says that it's connected, but it clearly ain't!

I wonder why it would disconnect that much,no problem like that on Z1. Do you have any task killers or antivirus?
What about stamina?
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Why won't LR import my photos from my Sony a77?

When I tried to import my photos from my Sony a77 it imported but it wouldn't display the image. And when I went to my hard drive (where my catalog is) and viewed the images they had red lines through them. Why?

Try disconnecting your phone and see if it works.

Why am I disconnected?

Similar Messages

Maybe you are looking for