Why am I dropping calls and only get 3G?

I switched to Verizon because my previous provider stopped covering my area. Now I'm having problems with Verizon dropping calls and not having internet at home. Any idea why the service has gotten worse?
galaxy s3
66072

@local101,
Thanks for the additional details! I show you're in an extended area and may see the service fluctuate between 3G and 4G. Verizon Wireless radio frequency (RF) engineers and system performance engineers regularly evaluate network coverage and performance to identify locations that may require additional coverage. Based on their analyses and recommendations cell site construction or other improvements are then planned and budgeted accordingly.
Try removing the sim card for a minute or two. Insert and retest. This should help refresh the connection.
JohnB_VZW
Follow us on Twitter @VZWSupport

Similar Messages

Just installed 7.02 and only get itunes icon and usb cord. If I connect to itunes as requested, will I lose all my photos ? 7 installed just fine, why the problem with 7.02 ?

Just installed 7.02 and only get itunes icon and usb cord. Why should I have to connect to itunes ? If I do, will I lose all of my photos ? Shouldn't I get free service for their software problem ?

You don't have to update to 7.02 if you don't want to, though this update does fix a few glitches in 7.0.
Before updating, you should always back up your data - it's standard practice. I've never lost pictures in an iTunes update.
Perhaps you could elaborate on the comment, "Just installed 7.02 and only got itunes icon and usb cord." What problem are you having, exactly.
Your next question confuses me. "Shouldn't I get free service for their software problem ?." What free service were you looking for? You can always go to your local Apple store for help, or ask questions here for free.

I am using elements 10 and only getting audio not video. Can anyone please explain why? I am a total newbie to video.

I am using elements 10 and only getting audio not video. Can anyone please explain why? I am a total newbie to video.

greenfrogstone
Just saw your thread, and it looked like a candidate for the Premiere Elements 10 NVIDIA GeForce Roll Back the Driver issue. If your computer uses a NVIDIA GeForce video card/graphics card, then the following applies to you. You do not want to update the driver. Rather you want to roll back the driver version, probably to about May 2013. For your convenience I have done a copy/paste of the forum announcement which gives all the details and fix of the matter.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
This matter has been very specific to the Premiere Elements 10 NVIDIA GeForce card user. So, if your computer is using other than a NVIDIA GeForce card, it is likely that the message does not apply to you, and we can then explore other troubleshooting possibities.
Looking forward to your follow up. Do not hesitate to ask for clarification on anything written here.
Thanks.
ATR

My Maxx HD keeps dropping calls and always has very little signal

My maxx hd keeps dropping calls and always has very little signal.

AngelMunoz2011,
I am sorry to hear about your troubles with service on your phone. We definitely want to make sure that you are always receiving the best service options. What zip in general are you having the most trouble in? How many bars of signal are you typically getting? Could you try clearing the cache on your device http://vz.to/KRifEf and also try removing/reinserting your 4g sim card. We are here to help, so please keep us updated.
Thank you,
TonyG_VZW
Follow us on Twitter @VZWSupport

HT3576 Why you receive a notification and you get the banner across the top is there a way you can swipe or something to get it to go away?

Why you receive a notification and you get the banner across the top is there a way you can swipe or something to get it to go away?

Hello,
Unfortunatelly there is no option to automatically reload the sequences that got modified outside the current application.
I'm not quite sure why you are getting this message. However, since you mentioned you modified the process model, I have a couple of suggestions:
1) Make sure you are not modifing your sequences at runtime. Usually you get this message when you modify properties under SequenceFile. This is the File object and if you change it, TS may reload it.
2) When you call your sequences, also make sure you have the same prototype for the parameters your sequence is expecting and the ones you are sending.
Maybe you can gice us some more details about how you executing this sequences and how you modified the process model.
Regards,
Roberto Piacentini
National Instruments
Applications Engineer
www.ni.com/support

2.2.1 update means dropped calls and wifi problems?

I've noticed some other threads about dropped calls, and 3G issues, but is anyone else getting wifi problems? Seems to not want to detect anything, restart it, and it picks up, but inveitably fails a day or so later...

I have not experienced any wi-fi connection problems, and I regularly connect to a number of different wi-fi networks.
I suggest resetting network settings on your iPhone. Go to Settings > General > Reset and select Reset Network Settings.
This will erase all saved wi-fi networks on your iPhone, which will require re-connecting to all wi-fi networks that you have access to and if any are password protected, this will require re-entering the password for a password protected network.

HELP!! My iphone 6 keeps dropping calls and I have a verizon extender

Hi,
My iPhone 6 my Carrier is Verizon my iPhone 6 has been dropping calls I think it’s only when I’m home and also we have a cellphone booster aka Verizon Extender and it does connect to that also but when someone calls me it connects then drops right away and then I try right away to call them back and then the call goes though. I have tried a hard reset on my iPhone 6 I have tried just by turning on and off the airplane mode and I have tried resetting the network settings which I just did. I thought of maybe doing the part when you take your sim card out and put that back in but I have not done that yet! I don't know what to do if this keeps happing it is really annoying! Can you please help me! Thanks Also I have looked online of how to fix it but have not come up with anything yet
How do I stop my iPhone 6 from dropping calls?
Also
my iphone 6 keeps dropping calls and I have a verizon extender and it says that my iphone is on it but it is not working and I have either 2 or 3 LTE bars.
Thanks

Contact the carrier to troubleshoot the issue.

When i restore my backup from computer why do my minutes texts and data gets removed from my pay as you go sim card

when i restore my backup from computer why do my minutes texts and data gets removed from my pay as you go sim card?

As long as it's unlocked it will work with any SIM, incl. EE SIMs.
If you buy abroad you need to ensure it is compatible with UK mobile frequencies, on which I cannot advise.

Will apple replace my ipad if i dropped it and screen gets black light, will apple replace my ipad if i dropped it and screen gets black light

will apple replace my ipad if i dropped it and screen gets black light, will apple replace my ipad if i dropped it and screen gets black light?

Not unless you've got accidental damage cover on it with Apple and I don't think that's even covered with Applecare - if you have that then check with them directly.
Otherwise you may need to see if you can claim for it under your house contents insurance.
Regards,
Steve

Okay, for a novice (iphone for dummies) what steps to take and in what order to identify specific problem and resolve issue of dropped calls and/or bad connections. I have a 3g iphone4, I think. Where is best place to find that information so I can veri

Okay, for a novice (iphone for dummies) what steps to take and in what order to identify specific problem and resolve issue of dropped calls and/or bad connections. I have a 3g iphone4, I think. Where is best place to find that information so I can verify.

You can call your wireless provider and talk to them about it.
You can restart your iphone, reset, your iphone and restore your iphone.

Recording stereo audio and only getting one side - what gives?

Recording audio in stereo mode in logic and only getting one side showing on the meter and same side showing on the audio file - I've checked the interface - is there a logic setting I'm missing?

Is Universal Track Mode enabled?

I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?

I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?

Hi RWD2,
Welcome to the Support Communities!
To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

HT204053 After i upgraded to the latest IOS 8.3, now my wife gets my calls and I get hers.

I just upgraded my i phone 5S to the latest 8.3 and now my wifes phone gets my calls and mine gets her calls. Not sure where this happened or how to stop it.

Fasform wrote:
I just upgraded my i phone 5S to the latest 8.3 and now my wifes phone gets my calls and mine gets her calls. Not sure where this happened or how to stop it.
This is a feature, part of the Continuity features of iOS 8. If you don't want it go to Settings/Facetime on each phone and turn off iPhone Cellular Calls. It is NOT sufficient to turn off FaceTime; in fact, if it IS off you will have to turn it on to gain access to this setting. You can turn it off after turning off the setting if you don't plan to use it.

TS1702 Downloaded Air Supremacy game app and only get company logo or black screen before iPad returns to home screen. Checked iPad and app up to date, no better. Any suggestions?

Downloaded Air Supremacy game app and only get company logo or a black screen before the app closes and goes back to my home screen. Checked that iPad and game are latest versions of software and restarted the iPad still with no luck. Any suggestions.

Have you tried a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Connected a new 27" LED display and only get 1280 resolution

Ok....got the monitor connected through the adapter (AD-TP400) and only get 1280 resolution....how do I get the full res on this monitor?

Interesting. I have your monitor directly connected to a 2010 Mac Pro which has the mini displayport built into the video card. I also still have the original Mac Pro (1,1) it replaced and that has the NVIDIA GeoForce 7300GT with 2 DVI ports, the one on the right being dual-link.
Where did you get the AD-TP400 adapter? I've searched on that part number and can't find it anywhere. I do see that Apple lists a connector which can do that but there is no part number associated with it.

Why am I dropping calls and only get 3G?

Similar Messages

Maybe you are looking for