Why am I finding this when I run disk utility? ACL found but not expected on "Library/Application Support/Apple/ParentalControls/Users"

I am finding this when I run repair disk permissions in disk utility:
ACL found but not expected on “Library/Application Support/Apple/ParentalControls/Users”
Why is there an access control list on parental controls on my MacBook?  I don't use parental controls and I am the only user of this MacBook. I'm an old guy too, so it's not my Mom putting controls on the MacBook! ;-)
Thanks!
MacBook Pro 9, 2
System Version: OS X 10.8.5 (12F45)
Kernel Version: Darwin 12.5.0
Boot Mode: Normal

From the article I posted a hyperlink to in my 1st post (at bottom): You can also usually ignore any "ACL found but not expected..." message. These messages can occur if you change permissions on a file or directory; they are accurate, but generally not a cause for concern.

Similar Messages

  • Error "ACL found but not expected on..." when doing repair permissions.

    I am getting an error on Disk Utility, Repair permissions.   I was having some problems with permissions and sought and received help through forum regarding changing my userid password through Lion Repair (Control R, etc.)  After finishing that ordeal, rebooting, etc.   everything seems fine and works well, perhaps slightly slow.   I decided to go into Disk Utility again and I repeatedly get the following errors...
    "ACL found but not expected on “usr/sbin/system_profiler”
    Repaired “usr/sbin/system_profiler”
    ACL found but not expected on “usr/sbin/systemsetup”
    Repaired “usr/sbin/systemsetup”
    ACL found but not expected on “usr/sbin/traceroute”
    Repaired “usr/sbin/traceroute”
    After about a 20-25 minute repair process, I clear the report ,exit disk utility, reboot the computer and I still get the same report.  Disk verify shows the hard drive to be functioning well.   What is the source of these errors and is there a solution.
    Thanks,

    I had those too.
    I used ACLr8 just now. Didn't know if it would work for Lion or not. Ran Disk Utility again and it didn't show any problems at all... after having several of the ACL's... which bugged me, even though they are not supposed to mean anything. :-)

  • Why do headings turn Chinese when I access my email via Firefox but not via Internet Explorer?

    Why do headings turn Chinese when I access my email via Firefox but not via Internet Explorer?

    hello, this is a displaying flaw caused the mcafee site advisor extension - please try to disable or remove that in case you have it present until there is an update by mcafee that can fix the problem.
    http://service.mcafee.com/faqdocument.aspx?id=TS100162
    https://community.mcafee.com/thread/76071

  • When I run disk utility, verify permissions I get "WARNING SUID file system/Library/Coreservices/Remotemanagement/ARDAgent.app/Contents/MacOS/ARDAge nt has been modified

    When I run disk utility, verify permissions I get "WARNING SUID file system/Library/Coreservices/Remotemanagement/ARDAgent.app/Contents/MacOS/ARDAge nt has been modified

    Please read Disk Utility's Repair Disk Permissions messages that you can safely ignore.
    Roger

  • When I run Disk Utility I guess this warning: "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified  and will not be repaired. WHAT DOES THIS MEAN?

    My computer seems to have been polluted by some virus os whatever, which the Antivirus software does not seem to find.  It is turning off on it's own, without any apparent intervention, while iddle.
    Then I read about this issue with Remote Management. IS there any connection here?
    thanks

    You do not need the Antivirus for your Mac.
    The disk utility warning can be ignored.
    Read this: http://www.thesafemac.com/arg/

  • I get message: Force Quit Application when I run iTunes about low disk space, yet I have enought disk space. Recurring often, now. When I run disk utility, tons of permissions differ on 'Applications/iTunes...uld be drwxr-x appear.

    When I run my iTunes on my Max 0SX after a while I get a window on my screen: message reads: Your Mac 0SX startup disk has no more space available for application memory (even though I run my Utility and have tons of space available.) I run the verify permissions and see tons of messages that read: permissions differ on 'Applications/iTunes...uld be drwxr-x; they are - rwxr-xr-x.' Utility cannot get rid of these 'permission' messges. This also happens when I'm working in iPhoto. Need help, please.
    This is not a Utility permissions problem. Seems it is more a disk space problem. HELP tells me to go Downloads and double-click on Downloads and choose Open Downloads.  But this does not work. Downloads will not open. Is it possible Downloads is 'locked?' And if so, how can I unlock Downloads?

    Trying to be more clear, here. Now, that I know the permissions are normal when running verify permissions in Utility.
    Main problem: when I run iPhoto for some time, or iTunes for some time, on my Mac OSX, I get a window that pops up with a message that reads: Your MacOSX startup disk has no more space available for application memory. (It asks me then to 'quit applications you are not using.' After I do that (even though only one app may be open, it tells me to Relaunch Finder).But when I check I see I have tons of gigabyte  space on my computer, I've only used a miniscule amount of disk space.
    I click on this message, without 'relaunching Finder' and I can't get rid of it.
    Why is it telling me I have no more disk space when I have tons of space? Why am I getting this message?

  • My HP Officejet Pro 8600 plus has dual sided printing. It is attached wirelessly thru my airport express. I can find no way to print dual sided using most but not all of my applications. When I go to system pref..printers..and check out any of the options

    Previous suggestions said after sys prfs..Printers..I should either open the print queues then go to printer setup then chose driver,  or go to options & supplies and then do settings, or in some way click the driver and pick the settings. None of the above provides the answer. I am using os x 10.8.

    Make sure the printer driver you're using is the correct one. In System Preferences, Print/Scan, select your printer, and see what it says under "Kind" on the right-hand side. If it's anything other than the exact model of your printer (if it just says Airprint, or Generic something), you need to delete the printer and add it back in using the correct driver. You may have to download the official driver from HP, but it should work automatically.
    Other than that, I'm not sure what else to try. The two-sided option should be in the basic printer page for most printers, as far as I know, but you may have to click the "Show Details" button on a print dialog to see it.
    Matt

  • Never seen this message before in disk utility after repair perm

    as an idiot I did th enew update and repaired permission hoping that that long hang up would go away and now it said this
    Repairing permissions for “Macintosh HD”
    2008-02-18 22:27:46 -0500: ACL found but not expected on "Applications/Utilities".
    2008-02-18 22:27:46 -0500: ACL found but not expected on "Applications".
    2008-02-18 22:27:46 -0500: ACL found but not expected on "Library".
    2008-02-18 22:27:49 -0500:
    2008-02-18 22:27:49 -0500: Permissions repair complete
    2008-02-18 22:27:49 -0500:

    Reinstall the 10.5.2 COMBO update and repair permissions. That should fix things. Alternatively, search these forums for ACL, sort by date, and read the responses and the article Apple posted three months ago: http://docs.info.apple.com/article.html?artnum=306925

  • Warnings when running disk utility after downloads, etc.

    I use Mc Janitor nightly to clear some of the 'stuff" that accumulates with files, etc. but run Disk Utility after downloads and such about once a month. I have done this since 2003 when I had my first e-mac. Only recently have "warnings " appear on the list of repair or varify disk...that says certain items can not be repaired. The techs at the Apple store said to just ignore them, which I have been doing. But the last download, which was a rather large new Security download, came up with something new, both on my computer and my husband's lap top when he downloaded it. These are letters that appear and say ACL found but not expected on Applications/Utilities, on "Applications" and on "Library."
    We are just curious about what ACL is (or are) and what it means to have them in our systems.
    It does say that the disk is verified when I run that. Everything seems to be working normally.

    A few posts below yours is this one:
    http://discussions.apple.com/thread.jspa?threadID=2310982&tstart=0
    New Permissions messages after Security Update/more curious than concerned

  • Running Disk Utility and got this message.  Anyone know what I should do?

    Started verify/repair permissions on disk disk0s2 Macintosh HD
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired
    ACL found but not expected on "Applications"
    Finished verify/repair permissions on disk disk0s2 Macintosh HD

    Click here for information, and run this update to get rid of many of the messages.
    (28719)

  • When I run Disk firstaid I get warnings

    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
    Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
    ACL found but not expected on "Applications/Utilities".
    Are these serious problems? My Mac is running ok. How would I fix them?
    A friend picked up a virus on her Mac. Are these virus related issues?
    She used this to get rid of the virus:
    http://www.apple.com/downloads/macosx/networking_security/clamxav.html

    SimonJester753 wrote:
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "usr/sbin/pppd" has been modified and will not be repaired.
    Warning: SUID file "usr/sbin/vpnd" has been modified and will not be repaired.
    ACL found but not expected on "Applications/Utilities".
    Are these serious problems?
    nothing to worry about. see _*permission repair messages you can safely ignore*_.
    A friend picked up a virus on her Mac.
    impossible. currently there are no viruses that can affect a Mac. ClamXav may have found a winsloth virus.
    Are these virus related issues?
    no.
    JGG

  • Warning when running Disk Utility

    I installed Snow Leopard without issue on Friday, but when I run Disk Utility on my hard drive, I get the following message:
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    I never received this message under Leopard. Can anyone tell me if it is a problem I can overlook or a more serious issue? Anything I can do to fix it? Thanks so much!

    Everyone is seeing this message. Don't worry about it.
    Search the boards for more threads, if you'd like.
    ~Lyssa

  • External Hard-Drive not showing in Finder despite no errors in Disk Utility.

    I have tried to follow certain steps as described in this community but I am at a loss on next steps here.  I have a wester digital that I have used for Time MAchne which all of a sudden does not appear on Finder.  I have run Disk Utility and I can see it there and run the verify and repart and it reports no problems...

    Here is the results of Terminal Query:
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *121.3 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Macintosh HD            120.5 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:                  Apple_HFS My Passport             999.8 GB   disk1s2

  • HT3728 Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on

    Base station error, air port utility was unable to find my airport device. Why does it say this when it recognizes my airport on the computer? Yellow light has been on

    On the older version of the AE you can still use older airport utility.
    But once you load the new one you cannot easily go back.. you can load an older 5.6 version though.. instructions below.
    For 6.3 you need to run ipv6 local link.
    see http://support.apple.com/kb/TS4597
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
    Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

  • HT204088 I want a receipt for the payment taken from my visa card.  Why am I finding this so hard?

    I want a receipt for the payment taken from my visa card.  Why am I finding this so hard to find/obtain?
    Cheers, Paul.

    Receipts are sent to your email address. It sometimes takes a couple of days to arrive, so if you just made an order, wait a couple of days and the receipt will probably show up. Otherwise the only option is the Purchase History as described in the support article from which you came, and there's no print mechanism so you would need to take a screen shot of the relevant page.
    Regards.

Maybe you are looking for

  • I downloaded the new InDesign 2014 and now it won't open on my computer. i run on a Windows machine. Has anyone had this happen?

    I really just need to know how to get it to open. I have created files in CC that now won't open, saying they were created in a newer version... which they weren't. i thought the remedy would be to download InDesign 2014, but i can't even get it to o

  • Using multiple apple tv's

    i have a first gen 250gb apple tv and i just recently bought the second gen apple tv also. I am using a macbook pro with lion for my main computer. Is it possible to use my first gen apple tv as the "library" that my second gen apple tv can load/stre

  • Creation of settlement documents, how to influence

    Hi  team ABAP, i have a requirement to influence creation of settlement documents which get created via TA MEB1 using the pushbutton "Settlement". There is a SMOD/CMOD project which we use as userexit. we use SMOD lwbon003, component EXIT_SAPLWN01_00

  • Windows Explorer folder context menu crash

    Hello, On a PC running Windows 7x64 Ultimate,  Windows Explorer closes with a "Windows Explorer has stopped working" message, and needs to be restarted. It quits when I right click on a folder, while right clicking on a file doesn't cause it to quit.

  • Monitoring e-mails in GroupWise 7.0

    I am a district-level administrator with a school district in Arkansas and we notify our employees that e-mails may be monitored for inappropriate use. However, my Technology Director tells me that GroupWise doesn't have this capability because e-mai