Why am I getting an error 306 when I try to update my ipod touch on itunes?

When I try to update my 3rd gen iPod Touch 32gb on my newly updated itunes, it tries to update it then gives me an error code 306 cannot update ipod because computer is not connected to the internet... My computer is fully connected to the internet and i can browse on firefox with no problems. Ran diagonstic tests through itunes and they said failure to connect to network. What should I do?

Try disabling the computer's firewall and antivirus duriong th download and update.
Are you sure it iserror 306? That is not listed as a error message in Apple's troubleshooting.

Similar Messages

  • Why am I getting an error message when i try to set my ipod up through itunes?

    it either says it cannot activate because of an error unplug and try again or it says could not back up due to unknown error when i try to update it :/ either way i cant get onto the ipod at all because its not been activated and i have no wifi.

    iOS: Troubleshooting backup issues in iTunes
    An internet connection is required to activate/setup the iPod. The iPod has to connect to Apple servers.

  • Why do i get an error message when I try to sync my ipod touch?

    Whenever I try to put music on my I pod it gives me an error message. Why?

    http://support.apple.com/kb/TS2830
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • HT1386 I get an error message when I try to sync my iPod touch - "you do not have enough access privileges for this operation"

    I recently installed a new hard drive on my PC, downloaded iTunes, updated the software on my iPod touch and now I get this error message when I try to sync:  "you do not have enough access privileges for this operation."  It never did this before, whether it's the upgrade in software or something in iTunes, but it's very frustrating, since I'd like to add more things to my iPod.

    See:
    iPhone - not enough access privileges: Apple Support Communities

  • Why do I get an error message when I try to update to iCloud 4 on my PC?

    Why do I get a "There is a problem with this Windows Installer package .... " when I try to update to iCloud 4?

    There is a very long way which is removing anything related to Apple including stuff in the registry.
    The short way is as follows. It worked for me. I got rid of ICloud 3.1 and installed version 4.0 on the first try.
    I have seen that in the forum EXCEPT the registry trick which is missing and does the difference.
    1. Remove the Apple account from Outlook.  In my case a me.com account.
    2. Disconnect the connection to ICloud in the control panel of version 3.1.
    REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
    3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
    4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
    and C\Program Files\Common Files \Apple.  My computer is 64 bits.
    5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud.  I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
    6. then I was able to install ICloud 4 immediately.  Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

  • Error message when I try to update my iPod Touch 4G 5.0.1 to 5.1.1

    I'm trying to update my iPod from the 5.0.1 version to 5.1.1 and always I get error messages (error # 9134). The same happens when I try to restore it too.  Any of you know what happens?

    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    http://support.apple.com/kb/TS3694#error3194

  • Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them :(

    Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them
    Is was working this morning!

    Depends on your operating system
    Go to google, try typing in
    Change permissions Windows
    or
    Change permissions Mac

  • GetLastError: 1392 - why do I get this error message when I try to uninstall Acrobat XI Pro?

    GetLastError: 1392 - why do I get this error message when I try to uninstall Acrobat XI Pro?

    Hi uckldag,
    Please try uninstalling using Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) and check.
    Regards,
    Rave

  • Why am I getting an error code54 when I try to sync

    Why am I getting an error code54 when I try to sync

    http://forums.imore.com/iphone/300573-error-54-trying-sync-music-phone-itunes.ht ml
    http://support.apple.com/en-us/TS3694

  • Why do i get an error message when i try to transfer photos from my pc to my ipad

    why do i get an error message when i try to transfer photos from my pc to my ipad

    Don't know why, what exactly is the error message?

  • Why do I get an error message when i try to sync my i phone4 with i tunes.

    Why do I get an error message when i try to sync my i phone4 with i tunes.

    Try here.   iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • When I try to update my iPod Touch, I get an error message regarding my network connection, and it will not update. Any suggestions?

    When I try to update my iPod Touch, I get an error message saying "The iPod Software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." Has anyone else had that and how do you end up updating your iPod?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • I keep getting an error message when I try to sync my iPod that says "the required disk is missing".  I don't have a clue what they are asking for..

    I keep getting an error message when I try to sync my iPod that says "the required disk is missing".  I don't have a clue what they are asking for..

    Try deleting the iPod Photo Cache folder. If location can be found here:
    iTunes: Understanding the iPod Photo Cache folder

  • Error Message when I try to update my iPod and Nano

    HELP! I am suddenly getting an error message when I try to update both my iPod and Nano that states "...certain songs could not be added because I am not authorized to play them on this computer..."
    Any thoughts???

    do you know which songs are being missed? (they will be itunes Music Store purchases.)
    do they play in your itunes at the moment?
    were they purchased through your iTunes Music Store account, or were they purchased by someone else (and your PC has been authorised to play songs from that account?)

Maybe you are looking for

  • Yellow triangle appears on all photos but no problem found?

    Things have definitely slowed down on Aperture since I upgraded to a Nikon D800 (each raw file is about 40mb). I'm having problems with speed and occational crashes. Yesterday the computer (macbook pro, 3 years old) forced me to shutdown and when I r

  • Persistence by reachability with FK in PK

    Hi,      I have a question concerning persistence-by-reachability in the following scenario (also see code, log in attachment): + A composite aggregation between Attribute and AttributeType (Attribute cannot be created without a valid Type) is mapped

  • How to load infotype 2010 data in to R/3?

    Hi, I posted the same question earlier but with a wrong subject line. My question is how can I load infotype 2010 data in to ECC 6.0? I am using PI to convert a flat file, but depending on the feature available on R/3 side(either IDOC, BAPI, or a fla

  • V3 Update

    Hi, What is v3 update and how and where it is used? Thanks

  • Overclocking the MSI Ti4200-VTD8X ?

    i just got my Ti4200-VTD8X MS-8894 (good card )and would like to see if it's safe to overclock it. what would be a fairly safe speed to clock this card (msi Ti4200-VTD8X) to ? , as i would like to overclock it to get a little more speed out of it