Why am i getting an error message saying new itunes library and itunes wont start up
every time i try to start up itunes an error message comes up saying new itunes library and itunes wont start up. I have no idea why this has happened as I havent used itunes in ages and havent knowingly changed anything since. does anyone have any ideas what the problem is. the last software update i got was in december
Go into the Control Panel for progams and try to repair the iTunes installation, or remove it and then reinstall.
tt2
Similar Messages
-
Why am I getting an error message saying my files ( that I created in 5.5 ) can not be opened because they are created in CS6? Says I have to open in 6 and back save to 4.
Ask in the ID forum and provide at least some useful info like system specs, what's contained in the files, where they are stored...
Mylenium -
Everytime I try to update to Itunes 11 I get an error message saying that Itunes has an invalid signature and can't be installed? I have tried to install it two times and get the same message each time. Any solutions to my problem?? Those who have installed ITUNES 11 is it hard to work with? maybe im lucky it wont update?? I don't know.
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I have an Ipad 2. I am trying to sync my ipad to the itunes library, but I get an error message - saying the itunes library is full. How can that be? I've deleted lots from the library to see if that would help - but it still states I am about 25gb short. Can anyone help what to do?
Could any of the music have been sourced on an external USB drive or a network drive? In iTunes, go to one of the songs that won't sync. Bring up the info page, and look at the location of that song on the disk. Does that file and path exist? That could be your problem, especially if they were on a USB drive you forgot about.
-
When I access the itunes store I get an error message saying that Itunes has detected a problem and has to be closed. The rest of Itunes is working fine... Any help?
There could be any number of items causing this. First off is do you have an active internet connection? If so have you tried rebooting you computer?
-
I cannot open iTunes on my Macbook I'm getting the error message saying "the itunes library is locked or you do not have write permission for this file" what do I do to fix it?
Do #6 here
..Step by Step to fix your Mac -
Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?
Hello,
Did you reinstall lately?
My 10.4.11 Drive seemes to have iTunes 7.6.2 on it, have you tried Software update to see if iTunes is listed?
Another 10.4.11 drive has iTunes 6.05 on it... I hate upgrading iTunes, seems worse at every upgrade.
The 10.5.8 drive I'm booted from now has iTunes 8.02 on it. -
I cant sync my iphone to my itunes library, I get an error message saying there were problems and songs won't be
uploaded. "songs not found, would you like to locate?"http://ipod.about.com/od/itunesproblems/qt/Fixing-The-Itunes-Exclamation-Point.h tm
-
Hi, I keep getting an error message saying "the itunes library cannot be saved. an unknown error occurred. (-50). Any ideas on how to stop this appearing? Thanks!
Error -50 is a very unhelpful generic communications error with a number of possible causes. Something between the drive to which you are downloading and the drive from which it is all coming is not working correctly, which probably leaves several hundred options.
-
I get an error message saying “the iTunes Library cannot be saved. An unknown error occurred (-50) How can I fix it?
You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81. -
When I try to open i tunes it brings up an error message saying 'new itunes library'. It does not open then. Can anyone help?
I have windows 7. I went into control panel, then select programs, then select programs & features. Highlight 'iTunes' from the list. Then select 'repair'. The program will then reconfigure iTunes. Once complete I restarted the computer and everything was ok.
-
Error message saying "new itunes library"
downloaded the latest itunes now when i try to open itunes just get error message saying "new itunes library"
Try this approach:
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
If that doesn't work go into the Control Panel for progams and try to repair the iTunes installation, or remove it and then reinstall.
tt2 -
HT201210 i get an error message saying that a session could not be started.
i am using an iphone 3g. i am only trying to get the iphone to work as an ipod. it has been reset and when i try to restore it i get an error message saying that cant continue with activation at this time try again later. i am trying to fix that rror by updating the iphone. that is when i get the error stating that they cant start a session. i tried a couple fixes but i dont know how
Same - with latest Itunes version 10, iphone 3gs, ipad 2 and new ipad all on iOS6. Tried rebooting attached, not attached, even reinstalled itunes. same problem - will sync fine but refuses to backup or restore. Windows 7 also. Itunes bug since the last version 10. Also restarted the Apple Mobile device service to no avail.
-
When i try and open Firefox, I get an error message saying 'unresponsive script' and it wont allow me to press the continue button. What do I do?
== This happened ==
Every time Firefox opened
== Today ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.41
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open. How can I fix this issue?
Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden
Maybe you are looking for
-
Java 1.5 rpm install on Suse Linux 9.3
Hi all, I downloaded the jdk-1_5_0_17-linux-i586.rpm from SUN, and tried to install it via YaST on my Suse 9.3 box, but it won't install. I click "Install Package with YaST" and then it just brings me to a blank screen. Anyone else experience similar
-
Backup fails with WD-MyBook 3TB USB Harddisk
We have a SBS Server 2011 and were Always able to create backups with external harddisks. However, we have purchased several WD MyBook 3TB disks and now the backup does not work anymore because of i/o error on external device. We can see the harddisk
-
Hi: Somebody help me with some information about how to Configurate the switch step (Condition, left operand) in BPM
-
Another non-functional Imac. (Sorry)
I run OS9.0 on an Imac. This morning,I encountered an error type 41 when I turned it on, and the system specified that it was an error with the time synchronizer. I went through the standard troubleshooting procedures to try and fix the problem mysel
-
Import DNG preference not working
I have set the import extension as dng to auto import as dng from a Canon 40D. Doesn't happen and after I import I have to convert the raw to dng. Is there anything I need to do in addition to setting the preference? Jay Gould