Why am I getting an error message when trying to replace existing music on itunes

How do I stop the error message from showing up when I try to replace existing music on my iTunes?

You are getting an error message because there is an error.
Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
Regards,
Barry

Similar Messages

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv file?

    I went through the forums and made sure that any blocks or copywrites weren't triggered by the file, it's clean and can be opened using a media player and other video editing software like windows MovieMaker. I keep getting "The importer reported a generic error" message and have no idea how to proceed. Can someone please help?

    Re: Why do I get "generic error" message when trying to upload a self-created, 1hr .wmv  file?
    This ARTICLE starts with a checklist on setting up a computer to run PrE best, then goes into a series of links for tuning up one's computer and OS, and then links on troubleshooting.
    There is also a link on posting all necessary info, to help others help you.
    Without knowing much more about your system, it is impossible to say much beyond that WMV's are tough assests to work with, requiring a lot of CPU horsepower.
    Good luck,
    Hunt

  • HT201262 i keep getting an error message when trying to sync my iphone in itunes, "duplicate file name specified." Anyone have any help?  Please??

    i keep getting an error message when trying to sync my iphone in itunes, "duplicate file name specified." Anyone have any help?  Please??

    You can try going to iTunes with your device connected, select your device, then click view, show duplicate items

  • I am continually getting this error message when trying to up-date software for: iTunes and iPhoto:The operation couldn't be completed. (NSURLErrorDomain error -1012.)

    I am continually an error message when trying to up-date iPhoto and iTunes. Does anyone have any suggestions, please?

    Hello Linc. These are the logs to the last attempts at up-dating iTunes.
    Sep  8 18:10:59 iMac.local Software Update[1722]: SoftwareUpdate: Scan for client pid 1722 (/Applications/App Store.app/Contents/MacOS/App Store)
    Sep  8 18:11:02 iMac.local Software Update[1722]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
    Sep  8 18:11:04 --- last message repeated 1 time ---
    Sep  8 18:11:04 iMac.local Software Update[1722]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7fd9a8cfae70 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
    Sep  8 18:11:04 iMac.local Software Update[1722]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    Sep  8 18:11:17 iMac.local Software Update[1722]: SUAppStoreUpdateController: proceed with scan based on intervening install (including Unity Web Player at 2013-07-23 17:32:38 +0000) (last scan: 2013-03-11 16:00:20 +0000)
    Sep  8 18:11:17 iMac.local Software Update[1722]: SoftwareUpdate: Scan for client pid 1722 (/Applications/App Store.app/Contents/MacOS/App Store)
    Sep  8 18:11:19 iMac.local Software Update[1722]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
    Sep  8 18:11:22 --- last message repeated 1 time ---
    Sep  8 18:11:22 iMac.local Software Update[1722]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7fd9a98c2090 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
    Sep  8 18:11:22 iMac.local Software Update[1722]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    Sep  8 18:11:39 iMac.local installd[1728]: installd: Exiting.
    Sep  8 18:14:15 iMac.local Software Update[1751]: SUAppStoreUpdateController: found in cache: <none>
    Sep  8 18:14:16 iMac.local installd[1757]: installd: Starting
    Sep  8 18:14:16 iMac.local installd[1757]: installd: uid=0, euid=0
    Sep  8 18:14:16 iMac.local Software Update[1751]: SUAppStoreUpdateController: proceed with scan based on intervening install (including Unity Web Player at 2013-07-23 17:32:38 +0000) (last scan: 2013-03-11 16:00:20 +0000)
    Sep  8 18:14:16 iMac.local Software Update[1751]: SoftwareUpdate: Scan for client pid 1751 (/Applications/App Store.app/Contents/MacOS/App Store)
    Sep  8 18:14:19 iMac.local Software Update[1751]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
    Sep  8 18:14:21 --- last message repeated 1 time ---
    Sep  8 18:14:21 iMac.local Software Update[1751]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7f9391840bf0 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
    Sep  8 18:14:22 iMac.local Software Update[1751]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    Sep  8 18:14:22 iMac.local Software Update[1751]: SUAppStoreUpdateController: proceed with scan based on intervening install (including Unity Web Player at 2013-07-23 17:32:38 +0000) (last scan: 2013-03-11 16:00:20 +0000)
    Sep  8 18:14:22 iMac.local Software Update[1751]: SoftwareUpdate: Scan for client pid 1751 (/Applications/App Store.app/Contents/MacOS/App Store)
    Sep  8 18:14:25 iMac.local Software Update[1751]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
    Sep  8 18:14:27 --- last message repeated 1 time ---
    Sep  8 18:14:27 iMac.local Software Update[1751]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7f93904b5c00 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
    Sep  8 18:14:27 iMac.local Software Update[1751]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    Sep  8 18:14:36 iMac.local Software Update[1751]: SUAppStoreUpdateController: proceed with scan based on intervening install (including Unity Web Player at 2013-07-23 17:32:38 +0000) (last scan: 2013-03-11 16:00:20 +0000)
    Sep  8 18:14:36 iMac.local Software Update[1751]: SoftwareUpdate: Scan for client pid 1751 (/Applications/App Store.app/Contents/MacOS/App Store)
    Sep  8 18:14:38 iMac.local Software Update[1751]: Failed Software Update - Refusing invalid certificate from host: swscan.apple.com
    Sep  8 18:14:41 --- last message repeated 1 time ---
    Sep  8 18:14:41 iMac.local Software Update[1751]: SoftwareUpdate: Error encountered in scan: Error Domain=NSURLErrorDomain Code=-1012 "The operation couldn’t be completed. (NSURLErrorDomain error -1012.)" UserInfo=0x7f93904b7340 {NSErrorFailingURLKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog, NSErrorFailingURLStringKey=https://swscan.apple.com/content/catalogs/others/index-mountainlion-lion-snowleo pard-leopard.merged-1.sucatalog}
    Sep  8 18:14:41 iMac.local Software Update[1751]: SUAppStoreUpdateController: scan (f=0, c=1, p=1, r=1) got error The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    Many thanks.
    Cropper100.

  • Why do I get an error message when trying to Extrude and Bevel my image?

    I am making a logo for a friend and he wants something similar to the Stark House symbol. (The Direwolf) but as a dragon instead. I used the pen tool to make the shape, and now I want to fill it in and make it more 3D. I can't fill it in properly and my image gets an error message when I try to Extrude and Bevel. Why is this?

    error message,
    Is the path/shape closed?
    Selecting it and Ctrl/Cmd+J should close it if not, then you may try again.
    You may also have a look in the Document Infor palette with Objects ticked in the flyout and the path selected.

  • Why am I getting an error message when trying to download iOS 6.0.1?

    Given that iOS 6 and 6.0.1 have been out for a good few days now, why am I still getting an error message?  Is it simply a case of keep trying??

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Why am I getting an error message when trying to burn my CD collection to iTunes.

    The message "Error occurred while converting the file (song title). The required disk cannot be found".
    Only two particular CDs were affected with this error message while all the rest were ok. I'm burning them via an Apple USB SuperDrive onto my MacBook Air. The CDs in question are Flight of the Conchords and Goldie Lookin Chain (if that makes one iota of difference). Does anyone have any suggestions?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • Why do I get an error message when trying to open PE 8.0 projects with PE9.0?

    I am trying to open a project in PE 9.0 that I made with PE 8.0. Each time, and with different projects, I get this error message:
    "Projects created with Adobe Premiere Pro and Adobe Premiere Elements are not compatible. Please use apropriate application to open this project."
    I have never used Adobe Premiere Pro nor is in installed on my computer! I updated my PE 8.0 with the patch that came out last year.
    My Operating System is Windows XP Pro, Service Pack  3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. I have an Intel Core2  processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4  GB DDR2 SDRAM at 800 MHz.
    My hard drive has been defragmented and have 779 GB or 83 percent free space.

    Can you create a test Project in PrE 9 and does that work. If so, close that Project and then Open it again in PrE 9.
    It could be as simple as your PrE 8 Projects just not Opening in PrE 9. There is often forward compatibility, but not always. It is usually best to finish Projects in the version, in which they were started.
    Good luck,
    Hunt

  • Why am i getting an error message when trying to backup my iphone

    Getting an error message that iTunes can't synch ----phone because there was an error. 

    If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test:   Go to...
    Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options.  Turn off all apps from backup and then do a manual backup.  If that doesn't work, then this post will not help.  If the backup works, then go back to the app list and turn some on and try another backup.  If successful, keep repeating these steps.  If it fails at some point, then try to zero in on the one app that seems to make the backup fail.  (I had this problem and found one app failing, probably due to a corrupt data file.)
    This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one.

  • Why do I get an error message when trying to sync my ipads with my imac

    We have two ipads - version 2 I think - the last ones with the old style plug.  Both are running IOS 7.1.1  Over the last week, every time I try to sync either ipad with my imac (27" - about 18 months old) which is running OSX 10.9.2 I get the following error message.  "The Ipad cannot be synced. An unknown error has occurred (1723)"  In every case it takes a while for the error message to appear - the sync gives every impression of rolling along just fine through the various steps - when it reaches step 5 of 6 (syncing photos) it seems to hang up, then after a while the error message shows up. 
    Interestingly, there are no photos on the ipad, so nothing to sync to the imac, but I discovered all of this when I tried to sync some photos in the other direction, from iphoto to one of the ipads. All I got was the pin wheel of death. I am running the most current version of iphoto too.
    Any suggestions on how to fix this would be gratefully accepted.

    Can you create a test Project in PrE 9 and does that work. If so, close that Project and then Open it again in PrE 9.
    It could be as simple as your PrE 8 Projects just not Opening in PrE 9. There is often forward compatibility, but not always. It is usually best to finish Projects in the version, in which they were started.
    Good luck,
    Hunt

  • Why do I get an Error Message when trying to "External link" an SWC?

    hi.
    when I use the "external link" option in the SCW linckage
    dialog box, the running SWF produces an alert box saying :
    "VerifyError: Error #1014: Class mx.core::Application could
    not be found.
    at flash.display::MovieClip/gotoAndStop()
    at
    mx.managers::SystemManager/::preloader_initProgressHandler()
    at
    flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.preloaders::Preloader/::timerHandler()
    at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
    at flash.utils::Timer/flash.utils:Timer::tick()
    I did what the documentation said, still I get that error...
    ..quoting the "Using flex builder 2" doc:
    "To set the SWC file as an external library file:
    With a project selected in the Navigator view, select Project
    > Properties > Flex Build Path.
    Select the Library tab, and then select and expand the SWC
    file entry to display the SWC options.
    Double-click the Link Type option. The Library Path Items
    Options dialog box appears.
    Select the External option, and click OK. "
    Anty suggestions?
    thanks,
    Guy.

    error message,
    Is the path/shape closed?
    Selecting it and Ctrl/Cmd+J should close it if not, then you may try again.
    You may also have a look in the Document Infor palette with Objects ticked in the flyout and the path selected.

  • Why do I get an error message when trying to publish animate deployment package?

    I continually get the following error message every time I try to publish an animate deployment package.  I have no idea what Poster3.png is.  There is no image in my file with that name.  I have tried saving my composition under a new name and it doesn't resolve the issue.  I have no idea how to fix this.

    You may get this error if you had done the following:
    - create a comp and save it
    - publish to OEM
    - delete the poster in file system
    - publish again
    Workaround:
    Go to the composition click on stage and generate a poster image from the properties panel.
    Now publish again.
    Let me know if this works.
    -Sujai

  • Why do I get an error message when trying to download Safari 6.02

    0Error message is NSURL Error domain error 3001)(102

    I get the same error message but as yet I don't have a solution

  • Why am I getting this error message when trying email a PDF?Server Connection Error. Please verify that port 143 is available for connection on your machine or contact your administrator.

    My Inspector for my house sent me his report via PDF that I had to access from an online link. I downloaded it but cannot forward it in an email to my insurance company who is requiring a copy. I get this error report every time:
    Server Connection Error. Please verify that port 143 is available for connection on your machine or contact your administrator.
    I have no idea what this means. Can someone help? I really don't want to have to print and scan this beast but I've been messing with this for 2 days now and am out of ideas.
    Thanks!

    I'm having the same issue.  Did you resolve it?

Maybe you are looking for

  • Running a J2EE project on WAS at a regular interval

    I am going create a EJB project to poll (or check) any change in a DB and do some business logic or mapping everytime when the DB is changed. So, my question is how I can configure this project to run at a regular interval, says 5 mins? Since my WebS

  • BitLocker Drive Label

    We use BitLocker on our laptops which are not connected to AD. We would like to change the Computer Name of the laptops and would like the BitLocker Drive Label to match the new Computer Name. Is there a way to change the Drive Label without decrypti

  • Itunes unable to transfer all purchases from ipad

    So whenever i try to transfer purchases from ipad onto itunes there comes an error saying some of the purchases couldn't be transferred because this computer isn't authorized to. I then authorize and it says i've already authorized. But try transferr

  • ORA-29902: error in executing ODCIIndexStart() routine ORA-06502: PL/SQL: n

    I'm trying a simple spatial query and this does not work: select count(1) from will w, t_line_sdo t where w.ID = 2 -- and SDO_relate(T.sdo, W.sdo, 'mask=anyinteract querytype=WINDOW')= 'TRUE' t_line_sdo is indexed on sdo column. will is indexed on sd

  • Simple Method/Object Concept Question

    I really appreciate everyone's help! Thanks you. I know that for action to take place in Java objects, blocks of code called methods are used. Methods tell an application what to do when buttons are clicked, menus are opened, and text is typed. Metho