Why am I getting data error lines in my image when it loads in LR 4?

I have LR 4.  When clicked to enlarge an image (a RAW image) it took a moment to load, (as usual) but when it finished there were multicolored strait horizontal lines in it.  What is not working correctly?  Is it Lightroom?  Is it my external hard drive?  Is it my computer?  I know there can be SD card errors, but I don't think that's it since I think it has happened to pictures that were okay on the card.  I think it is happening between my computer, external hard drive, and lightroom since I think I have seen this error appear on photos I have viewed in LR pre-error, and then the errors appeared.  If any one knows the source of this problem that would be appreciated!   This could be a dangerous problem if it happened to a valuable photo.

The above muskrat photo was one of a series of 9.  Just now I transfered the 9 from my external hard drive to my computer, and then imported them into lightroom.  Now, of the 9  that I imported to LR from my computer (copies of the originals that are stored on ext hard drive) 3 of them have lines.  Only one of the series have lines on my ext hard drive.  So it it a growing issue inside my ext hard drive > computer hard drive> Lightroom system.  Does that give any more helpful information to work on? 

Similar Messages

  • Why am i getting an error 1327 invalid drive f, when I try to setup adobe cs2?

    why am I getting an error 1327 invalid drive F, when I am setting up cs2?

    http://help.lockergnome.com/windows/Error-1327-Invalid-Drive--ftopict447642.html

  • Why I am getting an error stating incorrect media types when trying to setup playlists?

    I recently created a new playlist I wanted to setup on my iPhone, but I get an error message telling me that iTunes & iCloud cannot use the playlist as it has file types it cannot use.
    The only file types in the playlist are AAC's & MP3's.
    I don't gget it. I understand that iCloud will not do really large files or videos, but I checked the file sizes, bit rates and types of each song and none of them are anything that iCloud says it cannot use.
    What the heck is going on?

    iCloud also doesn't do tunes with bitrates below 96 Kbps.

  • Hi, I've just started as a fresher in sap fico and I'm upto the LSMW part and I'm wondering why I keep getting an error in Run batch step when I do everything else correct could you help?  Please help I'm really trying to learn it as fast as possible

    Please help I'm really trying to learn it as fast as possible?  I've posted the file with all my screen shots going through the enitre process of me creating the LSMW file.

    First, I will try to address the iPod issue: If youve tried EVERYTHING on the website, your only other option is probably to contact Apple, I recommend by phone, and informing them of the problem. You are covered by warranty and therefore they are liable to assist you. Try that and come back with a status update
    Now I will address your attitude about it:Its absolutely understandable to be upset over something like this, especially with such an expensive product, but you are generalizing far to much. You may think Apple is being unproffesional by not warning potential buyers of the iPods common faults, but do you really think they would? they are out to sell these things, they arent going to point out the bad in their product. And not all iPods have problems, in fact only a fraction do. That gopes for the rest o Apples products as well. You are too hasty assuming all Apple products are junk, and one of many reasons as to why that is unfair of you is becuase you dont own any other Apple products.

  • When I want to scroll through My picks why do I get this Error message (A necessary data reference could not be resolved."

    When I want to scroll through My pictures  why do I get this Error message (A necessary data reference could not be resolved)

    Before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

  • According to my network provider (Amaysim/Optus) Tethering is enabled, so why do I get this error message "to enable personal hotspot on this account, contact OPTUS"

    According to my network provider (Amaysim/Optus) Tethering is enabled, so why do I get this error message "to enable personal hotspot on this account, contact OPTUS"
    Amysim/Optus support can not help.
    I can not check or change any network settings (no APN settings)
    I have synced phone using latest itunes (10.5.3).
    Phone software is up to date (5.0.1).
    Network settings have been reset.
    SIM card has been taken out and put back in.
    Phone has been switched off/on again.
    Another sim card from virgin works ok (hotspot option is visible and can be turned on/off as required)
    The Amaysim/Optus SIM card can be put into another phone (android) and tethering/hotspot works fine.
    Can anyone provide solution to this nightmare?

    I am having the same issue although i have an iphone 5. I have contacted Live connected numerous times an tried everything imaginable to solve the issue. Is it possibly a handset issue? I cant recieve any help from optus as im with live connected, they cant help me and apple keep telling me to contact your carrier ( live connected). Seems to make me want to switch providers pretty shortly..
    please let me know if you can solve your issue and maybe it can help me too..

  • Why do I get the error message "iTunes Match could not download because disconnected from network?  I'm connected to the internet during that time with Safari so am I not connected to the network?

    Why do I get the error message "iTunes Match could not be updated because you were disconnected from the network during processing."  I'm on the internet during all of this.  What disconnect is the message referring to?  Itunes is frozen now.  I keep clicking OK but it just comes back with no action.

    Hello FredJay,
    Thank you for contacting Apple Support Communities.
    iTunes Match needs a network connection to work, either Wi-Fi, cellular or wired. See the following:
    Make sure you have an active Internet connection
    Be sure your computer or device has an active Internet connection by loading a webpage using Safari or another web browser.
    On an iOS device with cellular support, if you are not on a Wi-Fi network, try enabling 3G cellular data1 for iTunes Match.
    For iOS 6, tap Settings > iTunes & App Stores > Use Cellular Data > On
    For iOS 5.1.1 or earlier, tap Settings > iTunes & App Store > Use Cellular Data > On
    1Fees may be associated with downloading over cellular networks; contact your wireless carrier for details.
    From:
    iTunes Store: Troubleshooting iTunes Match
    http://support.apple.com/kb/TS4054
    Regards,
    Jeff D.

  • Why am i getting this error? they are not the same?

    1021: Duplicate function definition.
    1021: Duplicate function definition.
    stop();
    import flash.events.MouseEvent;
    // home button definition \\
    // Portfolio button definition \\
    Portfolio_btn.addEventListener(MouseEvent.CLICK, pClick);
    function pClick(event:MouseEvent):void{
        gotoAndStop("getPortfolio");
    // Contact Me button defintion \\
    Contact_btn.addEventListener(MouseEvent.CLICK, cClick);
    function cClick(event:MouseEvent):void{
        gotoAndPlay("contactme");
    why am i getting this error the functions have different names... idk what to do they are for two different buttons I am using action script 3.0

    i did what u said and it said these two lines were the same
    // Portfolio button definition \\
    Portfolio_btn.addEventListener(MouseEvent.CLICK, pClick);
    function pClick(event:MouseEvent):void{                                                         <--------this one
        gotoAndStop("getPortfolio");
    // Contact Me button defintion \\
    Contact_btn.addEventListener(MouseEvent.CLICK, cClick);
    function cClick(event:MouseEvent):void{                                                           <--------and this one
        gotoAndPlay("contactme");
    it gave me the same error but they are not the same

  • Why do I get an error in AirDrop that reads The Apple ID certificate for  is invalid.

    Why do I get an error in AirDrop that reads The Apple ID certificate for XXXX is invalid. The XXXX would be the name of the other computer I am sending it to. I am trying to transfer files from my iMac to my son's MacBook Air which are both up to date and running Lion.

    i had airdrop issues...
    when sending to another machine from my own, the other machine instantly denied the request
    when the other machine tried sending to me, it failed with a warning "apple id certificate is invalid"
    after calling apple:
    go to the apple>preferences>iCloud
    log out
    log in
    do this on BOTH machines
    fixed

  • Why do I get an error 1004 when I try to download an app?, Why do I get an error 1004 when I try to download an app?, Why do I get an error 1004 when I try to download an app?, Why do I get an error 1004 when I try to download an app?

    Why do I get an error 1004 whenever I try to download an app?

    Sometimes this will work as well when you get that message. It's easy to do. Try it before you do anything else.
    Go to Settings>Safari>Clear History, Cookies and Cache or Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • Why am I getting an error on iTunes 42110?

    Every time I open iTunes since the last update 11.0.02 I'm getting an error box -42110. Why am I getting this error? Anyone knows? I appreciater your help. Lety

    If your iTunes is up to date, remove the SC Info folder.

  • Why do I get a error stating units is undefined ?

    Why am I getting this error message?
         The unit "Bar Delta-P" of the channel "[1]/IPT_Cylinder_1" is unknown.
         Define a new unit or a unit alias.
    Solved!
    Go to Solution.
    Attachments:
    New WinZip File.zip ‏27 KB

    Hi J,
    I was able to run your posted script through without error as long as I had the "Calculate Quantity-Based" button in ANALYSIS unchecked.  The moment I checked it, though, your same VBScript produced on my computer the error you're getting on yours, at the ChnAverage() command.  Thus, I believe somehow that button in ANALYSIS got recently checked on your computer.  If you have the "Calculate Quantity-Based" button checked, you will also see channel units display in the Data Portal:
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Why do I get an error message in safari 5.1 telling me to restart in 32 bit mode in order to "view the movie" when I first start safari on opening page?

    why do I get an error message when I start safari 5.1 telling me I need to open browser in 32 bit mode in order to "view movie" ? This occurs when I start safari on the opening page (the page with all the boxes for most viewed web sites). This had never occurred with safari up until the latest updates to safari & OSX [Version 5.1 (6534.50)] and OSX 10.6.8.
    also, I'm not trying to view a movie - this occurs for the page previews that load when safari opens.
    thanks.

    go here:
    http://get.adobe.com/shockwave/otherversions/
    choose "different version">full 64 bit and download - seems to have solved probem...let you know if it happens again

  • When I connect my iphone4s to itunes on  my laptop I get this error...itunes was unable to load data class info from sync serv

    When I connect my iphone4s to itunes on  my laptop I get this error...itunes was unable to load data class info from sync serv

    In the course of your troubleshooting to date, have you worked through the following document?
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

Maybe you are looking for

  • Some apps don't appear in Notifications Settings

    I upgraded to iOS 5 on Thursday with my iPhone 4 and notifications worked fine.  I was able to go in and individually set notification settings for almost all of my apps.  Last night I bought the iPhone 4s and installed all of my media, contacts, and

  • Error while chaning W. Tax in AP

    Dear Experts, I am getting an error while changing W. TAx in A/P invoice i.e.  A/P Invoice - Document Total , Field cannot be updated (ODBC -1029)'  [Message 131-183]. As A/P is OPEN & has not yet been paid. Help required please. Whereas other APs ar

  • Why is the sound quality and volume in itunes so different than when I use other media players

    This is an issue which has been vexing me for some time. I've researched it all over the web and have not found a worthwhile answer. Some other posts on these forums have asked similar questions without successful answers. But, none the less, I will

  • Calibrate New iMac with Glass off?

    I have seen that the glass on the iMac is held on by magnets and can be removed very carefully to expose the LCD. This is supported by placing your apple remote on the black border - it will try to stick. What if you removed the glass, calibrated the

  • Outbound Delivery

    Hi, During creation of an Outbound Delivery from Stock Transfer, I am getting delivery quantities in decimals... Is there a way to round these decimal values? For example, I have a material with the UOM defined for Delivery/Goods Issuance as Case of