Why am I getting distortion using AT2020usb+ in GarageBand?

I bought a new AT2020usb+ and I'm using it with version 10.0.2
and OS10.9.2 on my 2.5GHz i5 MacMini with 8GB Ram.
When I record, I am hearing some distortion.
I tried playing with the volume and master volume level sliders to lower
the hotness, but it's not helping.
Any ideas? Thanx!

I assume you have an iMac with a fusion drive? If so, contact Apple. Audio dropouts on these machines even occur in iTunes.

Similar Messages

Why am I getting distortion from my audio interface while using Logic 9 on my new iMac with Maverick?

I have been recording using a line 6 UX2 interface and also, a Focusrite iTrack Solo interface, successfully with Logic 9 on my 2007 MBP for a few years now. I recently bought a new iMac and migrated my time machinre back up to the iMac. Since then I have had to maunually replace missing sound and room evironment files, and now I cannot get a clean mic recording using either interface or either of my two mics.
Any suggestions?
Perplexed in NYC

I assume you have an iMac with a fusion drive? If so, contact Apple. Audio dropouts on these machines even occur in iTunes.

Why am I getting 'VIs using Latched/Snap boolean cannot be downloaded' message when trying to download to the FP2000?

Using LabVIEW 6.0.3 RT

LabVIEW RT has two modes of opeation: Development mode and Deployed mode.
In the development mode Labview provides you with a USER INTERFACE for debugging purposes but at the end you want to be in the Deployed mode where you develop the user interface to communicate with your embedded vi with differents ways like TCP/IP, UDP, DataSocket, VI SERVER, etc.
Therefore, not all the mechanical actions for boolean controls/indicators are supported under real time.
Remember that you dont have a physical interaction with the interface.
In the figure 2 you can see the 6 diferents mechanical actions available for LabVIEW, however for the VIs that are going to be embedded the only 4 supported are
the first two colums. If you use one of the two in the last colum
n you will get the warning message when trying to download the application.
You will need to use the supported mechanical actions for your application.
Attachments:
figure2.bmp ‏2144 KB

I want to get a Nikon D3100, but my macbook has OS 10.5.5 on it and I've read that the D3100 needs at least 10.6.5. What will happen if I try to use this camera with my computer? Will iPhoto simply not recognize it or will I get distorted pictures, or..?

I want to get a Nikon D3100, but my macbook has OS 10.5.5 on it and I've read that the D3100 needs at least 10.6.5. What will happen if I try to use this camera with my computer? Will iPhoto simply not recognize it or will I get distorted pictures, or....what?

andyBall_uk wrote:
The manual says
❚❚ Supported Operating Systems The supplied software can be used with computers running the following operating systems: • Windows: <snip>
• Macintosh: Mac OS X (version 10.4.11, 10.5.8, 10.6.4)
Nikon say that you need 10.6.5+ for the latest firmware, although I don't see why.
Thanks for that! I was looking for that manual, but for some reason, couldn't find it.
I guess I'll have to contact Nikon and find out what the real story is. The camera was introduced in '08 or '09, so I'm wondering why you'd need software as recent as 10.6.5??
Still very confusing. :-?
Why does it state that the camera is compatible with "10.4.11, 10.5.8..."? Does that mean that anything between 4.11 and 5.8 is incompatible???
BTW, I tried downloading the 10.5.8 combo update recently and got an error message that the update was "corrupted" after it was all downloaded, so I was not able to install that.

TS1702 "The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?

The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?

Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again.

HT3702 why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook

why did i get charged three times for the same purchase? is it because i use my apple id on three devices.. two iphones, and ipad... and and macbook geez apple i support you enough can i just pay for one copy of the audiobook

These are user-to-user forums, you are not talking to Apple here.
If it was an audiobook then they are one-time only downloads, to get it on your other devices you need to sync it to them and not re-download it oneach. You can try contacting iTunes support and see if they will refund or credit you for the second and third downloads : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Why am I getting an error message when trying to use a template?

Why am I getting an error message when trying to use a Pages template?

You are getting an error message because there is an error.
Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
Regards,
Barry

Why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloadi

why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

AMDS for Windows
http://support.apple.com/kb/TS1567

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?

In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again!

Why am I getting messages such as "The command "Image Size" is not currently available" when trying to run an Action that has always worked in the past and when the particular Commands do work if used by themselves?

Why am I getting messages such as "The command Image Size is not currently available whenever I try to run an Action that uses the particular command (and which has always worked fine previously) and when the particular command works fine when used on its own?

I would think that image size would always be available when there is an active document in Photoshop. The only time I remember seeing messages like that where they should work was during the five month period when Adobe released CS6 with so many bugs which took Adobe five months to fix. During those five month messages like that that should not have happen were common when action switch between documents. Adobe would start processing the next Action step before the document switch completed, Any step that required an active document could fail with a mess stating the command is not available.
Are you by some chance using CS6 version 13.0 CS6 without any updates. Use Photoshop menu Help>About Photoshop. If it shows CS6 version 13.0 you need to update CS6. .

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.

I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.

Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?

Why do I get the error message: "The file "iTunes Library" cannot be read because it was created by a newer version of iTune." I am using iTunes9.1.1 which, I believe, is the highest for OS 10.4.11 ?

Hello,
Did you reinstall lately?
My 10.4.11 Drive seemes to have iTunes 7.6.2 on it, have you tried Software update to see if iTunes is listed?
Another 10.4.11 drive has iTunes 6.05 on it... I hate upgrading iTunes, seems worse at every upgrade.
The 10.5.8 drive I'm booted from now has iTunes 8.02 on it.

Why do I get static sound when I use a headset splitter iwith my macbook air 13"?

Why do I get a static sound when I use a headset splittter with my macbook air? The headphone works perfectly but when I put the mic in the splitter, the sound gets a little bit static. Any advice will be greatly appreciated.
Thank you!
Cheers,
francismba

I suggest an appointment at an Apple store genius bar for a free evaluation.
Perhaps an Apple Hardware Test may provide a clue:
https://support.apple.com/en-us/HT201257
Note that an error free AHT is not definitive.
Ciao.

Why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS app.?

why do I get and how do I correct the message _ This video is only available in the US - when I am in the US - I am trying to view Downton Abbey on my Ipad using the PBS ipad app.? Thanks for your help

Privacy is an Option in the Settings App, its not in Safari as that applies only to Safaris browsing. Its called Privacy in IOS 6 In previous versions the same thing can be found under Location Services.

Why am I getting distortion using AT2020usb+ in GarageBand?

Similar Messages

Maybe you are looking for