Why am I getting no audio from MPEG-2 plug-in in FCExpress?

I have video with audio in MYTV in hard-drive and can get the video to Final Cut with the Apple MPEG-2 plug-in, but get no audio.
Any tips?

get streamclip
http://www.squared5.com/

Similar Messages

  • Why do we get the data from a view to a report.

    hi
    why do we get the data from a view to a report. is it possible to get the data from a view in all the cases?

    hi Jyotssna,
      Suppose you are planning to get the data from multiple tables then you got to specify seveal condtions and make use of joins which results in poor performance in fetching the data . In order to improve the performance we make use of views where the conditions of different tables are defined and the data is fetched accordingly.
    Regards,
    Santosh

  • TS4009 Why did I get an email from apple saying my iCloud storage is being downgraded?

    Why did I get an email from apple saying my iCloud storage is being downgraded?

    You were (previously) a member at MobileMe and got 20GB's of free iCloud storage in addition to the 5GB's offered by the "free" iCloud service.
    At the end of this month the 20GB's will go "poof" (like the rest of MobileMe).

  • Sony PFM-42V1: I cannot get any audio from monitor

    I cannot get any audio from my PFM-42V1. first: I connected independent speakers via speaker sockets - result no sound. Then after reading its Manuel it suggested I connect headphones to the monitor's audio mini jack - again no sound. What I do not understand is it said if sound doesn't work with headphones - contact computer manufacturer. Any suggestions?

    From your description it sounds like your using input 1 or input 2, you will need to feed a audio source into the 1/8 mini female jack (Fig. 1) next to input your using. This will allow the audio to pass to the speakers you've connected to the monitors speakers jacks (Fig 2). Also you'll want to make sure that within the Monitor Menu under Custom Setup that you have Speaker Out: On (not off).
    Fig 1.
    Fig 2.

  • HT4847 I get 5GB of backup, have 3.5GN available, why am I getting e-mail from icloud that I have exceeded my icloud storage?

    I get 5GB of backup, have 3.5GN available, why am I getting e-mail from icloud that I have exceeded my icloud storage?

    Your iPad cannot have 25 GB available, it could have 28 GB, are you sure you are not referring to your iCloud storage space.

  • Why does my wife loose audio from me after 20 min.

    I have no problems connecting to my wife with her new iPad3 when I call her with my iPod4 but I just installed FaceTime on my MacBook Pro and once I connect with her she looses audio from me after 20 minutes into the call. If I call her back she does not get any audio. When I call her 2 days later with my MacBook again it works for about the first 20 minutes and she looses audio again. I love my wife and want to talk to her for more then 20 minutes every 2 days and do it on a larger screen then my iPod any help please?
    Seems this is the place for answers as the only responce from Apple is try the forum we don't support our work just sell it and leave the suport up to the users.
    Pretty lame eh? But I guess thats why your all here you found that out a while ago i bet.
    Thanks

    Batteries die, that is a fact of life if. Most batteries only last a year or two with heavy use. As you appear to use your battery a great deal, your battery will lose its life very quickly. Keep this in mind if you get a new battery (which I would recommend at this point) try not to use the battery bellow 15% charge as the battery loses the most life in the last 15% of the charge. Also, unless you really need to use the battery all the time, plug in. There is nothing wrong with using the battery for a few hours every day, but if you use it all the time, your cycle count will go up fast, and you'll go through batteries fast.

  • Why did I get an email from the fraud dept saying my order is on hold, told to call a number, and then told by dept it's not true?

    I placed an order to upgrade my phone yesterday, and the order went through, I was told the new phone would arrive Thursday. After I got home from work today I saw an email from Verizon that says "Dear Customer:
    Verizon Fraud Prevention Team is currently reviewing the following order on your wireless account. Please call the Verizon Fraud Prevention Team at 888-483-7200 option 3, press 1 to verify this Order."
    I called this number immediately, since I need this phone ASAP, assuming it would just be a recording and I would have to verify an account number or something. But instead, after following the instructions, I was put on hold because I needed to speak to someone in person. After several instances of my call being cut off after being on hold for at least half an hour, I finally got through after three hours and was able to speak to a fraud representative. I gave her my info and told her the problem and she told me I had called the wrong department. Instead of the fraud department, I needed the online order department. She transferred me, and I waited on hold again. When the representative from the online order dept picked up, she first told me if it was a fraud issue I'd need to speak with the fraud dept - who had JUST transferred me to her. After this, she said that my order is not on hold, because it hasn't even been processed yet or had the credit check done. When I asked if this meant I hadn't needed to call at all, she said yes. Is this actually true or is there a chance that there's an issue with my order I don't know about? If there is no issue, these emails really shouldn't be sent out, they're incredibly misleading, and I've wasted a whole lot of time and experienced an incredible amount of anxiety for no reason.

    Hi.  I checked on the order and it says the order is currently being processed and I should check back tomorrow. I'm mostly just concerned because I got an email saying the order was on hold, and I want to make sure it actually does go through and I'm not just waiting for a delivery that's not going to come. I'm still confused as to why I'd get an email saying I had to call the fraud department only to be told I shouldn't have called the fraud department.

  • Why is there suddenly no audio from my macbook air?

    Why is there suddenly no audio on my macbook air?

    did you put your Air to sleep with headphones attached, or closed the monitor with phones attached?
    Do not sleep your Air (close the monitor with headphones attached) with headphones attached, this is known to affect some Air under Mavericks.
      * this occurrence is being looked into.
    Much testing on my own and others as well show that, in some instances, this occurs in Mavericks.
    If you choose you may contact Apple for an appt and diagnostics.
       However as said, refrain from having phones attached when you close the monitor to prevent this until it is resolved
    Test this and re-verify
    peace  

  • Get strange audio from other parts of the video when I am using transitions

    In most cases when I add a transition, I get a strange piece of audio inserted during the transition. I know I can go in and manually edit this out, but is there some sort of fix to keep this from happening in the first place?

    Hello, Rick,
    Welcome to the discussions.
    Yes, that is a problem that happens sometimes, especially with the Cross-Dissolve transition. I use that one a lot, and run into this with many of my clips. I have 'fixed' it with a variety of methods including muting, putting music over it, adding audio clips recorded from the beginning of the next clip....for this one I have to delete the transition, crop the next clip, remove it to the clips pane, add back the transition and record the audio from the deleted clip using WiretapPro. Works great and actually is faster than it seems.
    You might be able to get some correction by trashing iMovie's preference file; Close iMovie. Go to YourUserName/Library/Preferences/com.apple.imovie.plist
    If you also have iMovie 8, you will see its plist as com.apple.imovie7.plist, so be sure to trash the correct one.
    Drag the plist file to the trash. Reopen iMovie and see if it works properly now.

  • How do I get analog audio from my apple TV 2nd generation?

    I am trying to find a solution to getting an analog (RCA stereo) audio output from my 2nd gen AppleTV to my Onkyo receiver so that I can listen to audio from it on my "B" (outdoor zone 2) speakers. Unfortunately the receiver only accepts anaLog input for the zone 2 speakers. The 2nd generation AppleTV only outputs digital audio. Kind of a pickle. The only solution I've found so far is a pricey digital to analog converter that costs more than the ATV! I have no idea if this will even work, or still output sound through the HDMI cable at the same time.
    Anyone out there have any advice or suggestions? Any and all help would be most appreciated as Apple tech support can be very unhelpful without paying for the support plan.
    Thanks,
    Brian

    Thanks so much for the quick responses! I've just ordered a DAC from B&H made by Gefen that should do the job. I opted not to get the one that decodes Dolby Digital as I only intend to listen to music on my Zone 2 speakers that are located outside on the back porch. However they do make one that would be great for those needing DD decoding, and I am told they corrected the popping sound when changes sources or channels.
    I could have bought a much more expensive receiver, but I feel that a have a stellar system that is up to date with almost all of the new technology. This will all change in 5 years I am sure! At least for now I am all hooked up with HDMI and am receiving the best in picture and sound, with the exception of my "B" speakers being analog. No biggie.
    I'm pretty happy with my Apple TV2 with except for the occasional wi-fi glitch and the lack of Pandora.
    Thanks again for the replies!

  • Dear Apple: Why cant i get Google Maps from Dominican Republic Store??

    The new maps app doesn't work on my current location but i cant get google maps from DR Store!! why??

    CarlosDR wrote:
    actually, you can get Google Maps from United States Store, but its not available on DR store!
    Yes.
    Then ask Google why they do not offer it in your country.
    Apple cannot force Google to offer it there.

  • Not compressing audio from MPEG

    I'm trying to use an MPEG in FCP, but it won't see the audio. I tried to throw it into Compressor, but Compressor says that it won't compress audio from an MPEG 1 or MPEG 2. Any advice?
    Thanks.

    I had only used it to rip from DVDs to this point . . . seems to be quite a bit more useful than I have seen it so far. Thanks!

  • How do I get the audio from the film to play back in Logic 8?

    I don't know what I'm doing wrong. I opened up a new project. Clicked on produce and the clicked on
    music for picture and then went to options and clicked on open movie. The movie loads in to logic. When I press play the film starts without the audio. I tried going into utilities and then to audio midi set up and switched the properties section to US-144 (tascam 144 interface) and still nothing. The movie plays for about a few seconds then stops and gives me this message: "Sample Rate 44100 recognized. Check conflict between Logic Pro and external device." What can I do? KGT

    hi
    you've 2 issues here, sample rate and audio from film.
    Re film audio, it's under options...
    Sample rate, do a forum search?
    SFLOGICNINJA has a great "How to" on working with film, google him.
    best
    steve

  • I Get No Audio from YouTube or KGO Bay Area Channel 7 TV clips

    The Powerbook gets the audio, the G5 does not. I don't get it. Any help is appreciated.

    Hello,
    Welcome to Apple discussions:)
    See if this apple document No Sound but System Alerts sounds play, helps any.
    If that doesn't do it try launching GarageBand if the G5 has that application.
    Please post back.
    Eme'~[)

  • Why do i get an error from bios for my sata dvd recorder?

    Hi!
    I have updated my bois to the latest 1.70 version for my K9N Neo 1.0 motherboard and get an error from bios that the S.M.A.R.T drives dont work and that i cant be read from my Sata DVD recorder?
    I have a samsung lightscribe 18X dvd recorder and it was no problem until i updated the bios. I have tryed to turn off s.m.a.r.t drives checkup but i still get the error.
    What can i do to stop bios from the error? now i have turn my bios to "no errors" so i dont have to clickon F1 every time i start och restart my computer.
    im using:
    XP PRO 32Bit
    AMD AM2 4200+
    2048 MB Corsair 800Mhz Ram
    2 x WD 250 GB Sata II 8 MB
    1 x Samsung dvd lightscribe recorder
    K9N Neo motherboard with 1.70 v Bios ( updated today)
    //VargTass

    Quote from: vargtass on 20-June-07, 22:51:54
    Hard Disk : S.M.A.R.T Status BAD, Backup and Replace
    //VargTass
    Quote from: BOSSKILLER on 20-June-07, 19:39:17
    so if you disable SMART & reported errors can your Sata DVD works normal?

Maybe you are looking for

  • I am Having a Nightmare!!

    Hi I would really appreciate some help! I just got a new 5th gen black 30GB ipod yesterday and I am having major issues trying to get it to work. I have an ipod mini and so all my updates where completely up to date and so I connected this new ipod t

  • Toshiba Qosmio x505 Q870 problem.

    I have just installed Battlefield 3 , and i was playing for a while untill my screen went off. when the screen turned off i was able to hear a loud sound from the laptop might be caused by either the DVD or by some fan inside (I am not sure) i tried

  • Can't open word doc that is a locked form

    I received a word doc in which the main text is locked, it contains form fields and those can be updated and saved. I tried to open this in Pages '09, it started, I got the progress bar, but as it got close to the end, Pages hung and I had to force q

  • Print CD on Epson R320 CD Tray

    For several weeks, I printed CD's on the CD Tray of the Epson R320 with my new Mac Pro. Suddenly, Epson Print CD stopped working. I started to use another Universal CD-printing program. I found the new printer drivers for Intel machines on Epson's si

  • Has anyone ever dropped an iphone in water and its worked again when its dried out?

    I dropped my iphone down the loo! Will it work again when it has dried out?