Why am I getting print file not accepted?

I'm using a HP LaserjetP1102W
Print file not accepted? No idea why?
It's been saying Printer Not Connected.
I'm using Safari and would like to print coupons.
Hope this is the right place to post this.
Thanks!

Hello lostvalleyfarm,
It sounds like you are not able to print to your HP Laserjet. I recommend following these steps to troubleshoot the issue you are experiencing:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

Mac won't print; says print file not accepted

My macbook pro won't print to a new wireless printer that I have; no matter what kind of file I'm printing (doc, pdf, jpg, etc), it says that the print file is not accepted. I've even used a usb cable to connect it directly to the printer and it still won't print; My computer recognizes the wireless printer, but does not print to the printer; It does however print to another printer that I have wirelessly, just not the new one. Any ideas on what I can do to make this work? I've even called Epson (new printer) and they can't figure it out...

Does another computer print to the new printer? You can try resetting the printing system Mac OS X: How to reset the printing system but I would suspect that the new printer may be faulty.

Why is my collada 3D file not acceptable to iBooks author?

I followed the instructions within iBooks Author, and obtained a (free) Collada 3D file with extension .dae.
iBooks Author doesn't accept this file.
How do I progress with my project?

Seen this document?
iBooks Author: Best practices for using 3D models - Support - Apple
If still no joy, you may need to find another source for this type of asset.

Why is netbook with c60 processor not accepting the download of drivers online & cannot use bluetoot

why is netbook with c60 processor not accepting the download of drivers online & cannot use bluetoot

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests
Error: "Unable to sync files"

Why do I get print error trying to print pdf?

why do I get print error trying to print pdf?

Assuming you are having a problem printing one PDF, and not every PDF, If you have Acrobat, you can try Tools> Print Production> Preflight> PDF/X Compliance> Convert to PDF/X-1a. You can also look in your printer settings and see if you have the option to "print as image".

"URLs with .file not accepted"

Just upgraded to Lion OS 10.7. When I try to search for an upgrade, I get the message URLs with .file not accepted. Anyone know what the problem is?

Why do I get pdf files with an underscore in the extension ( ._pdf)

Why do I get pdf files with an underscore in the extension ( ._pdf) and how do I open them when they are email attachemnts, becuase it wont let me rename it or save it as any other version.

Not sure. What email are you using? Gmail (or web based email) by chance?
Definitely not a Reader issue if you can see the underscore in your email.
You can try saving it as is then try renaming it using Windows Explorer to see if that works.

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library

I have lightroom 5.7 and a macbook pro 10.9.5. Occasionally when I am editing a photo in the develop module, I suddenly get a "file not found" message and the editing ceases to work. There is no "exclamation" icon below the histogram box in the Library module or on the photo in grid view, and the histogram is gone. What is going on? Trying to find it using the "find missing photos" in the library menu does nothing.

Quicktime gets a file not found error in running of set up. tried downloading twice

Quicktime gets a file not found error in running of set up. tried downloading twice

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

WL6.1 : Get '404 : File not found' for all WARs

I had some web applications deployed which were running perfectly. Now suddenly
, I get '404 - File not found' for any URL - including the server root, i.e. http://localhost/
I was able to access admin console using http://localhost/console. I checked the
config of each application & couldn't find anything wrong.
Finally I had to re-deploy the WARs to get some applications running.
However, I am still unable to get the Default Web App running - the one handling
server root path.. (I've checked the server config & it shows DefaultWebApp as
the default application).
Any pointers on what could be wrong / correction needed ?
TIA,
Subodh

Create a subdirectory called 'classes' and copy your servlet class file
          to the 'classes' dir.
          mydomain/applications/
          DefaultWebApp/
          WEB-INF/classes.
          Modify the web.xml file located in the mydomain/applications/
          DefaultWebApp/
          WEB-INF/ directory
          <web-app>
          <servlet>
          <servlet-name>
          myServlet
          </servlet-name>
          <servlet-class>
          package.name.myServlet
          </servlet-class>
          </servlet>
          <servlet-mapping>
          <servlet-name>
          myServlet
          </servlet-name>
          <url-pattern>
          servlet-url-pattern
          </url-pattern>
          </servlet-mapping>
          </web-app>
          Start the default WebLogic Server.
          Call your servlet from a Web browser with the following URL:
          http://localhost:port/servlet-url-pattern
          servlet-url-pattern is the value of the <url-pattern> element that you
          defined in the web.xml file.
          prakash wrote:
          > Hi everybody ,I have this web app on weblogic 7 .The application
          > works file with Tomcat 4.0 but on WebLogic server 7,I am getting
          > 404 not found for all the servlets ,although weblogic is serving
          > the html files without any problems

Why will my java.jar file not open

Why will my java.jar file not open

This is the iPod touch forum. Do you have a question concerning an iPod touch? The iPod touch does not run Java.
If you have a new Mac you have to download the Java program to run Java on a Mac. It no longer comes with the iOS.

Why is my user id/pw not accepted by ICloud on my iPad but it is accepted by iCloud on my computer? I am using the same password for both.

Why is my user id/pw not accepted by ICloud on my iPad but it is accepted by iCloud on my computer? I am using the same password for both.

Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.
Now try entering the information again. See if it works now.

When i try to share a movie to idvd from imovie i get a file not found error

when i to share a movie from imovie to idvd i get a file not found error can anyone help?

Hey ninimac!
Here is an article that can help you troubleshoot this issue with burning DVDs in iDVD:
iDVD: Troubleshooting issues with burning discs
http://support.apple.com/kb/ht1583
Thanks for using the Apple Support Communities!
Cheers,
Braden

Why do I get a "computer not authorized message" when it is authorized?

Does anyone know why do I get a "computer not authorized message" when it is authorized and how to fix the problem? I downloaded a couple of new apps on my iPhone and these wont sych with my iMac

i have the same problem but i have not found a way to fix it

Why am I getting print file not accepted?

Similar Messages

Maybe you are looking for