Why am I getting sound distortion when connecting iPad 2 to amplifier.
I am getting sound distortion when connecting iPad or iPod thru amplifier using AirPlay or 3.5mm to rca cables. Also the sound has far too much bass. No problems when connected in car.
It sounds like a mismatched impedence. What are you connecting to? the output from the jack is intended for headphones, and is not just an audio out.
Try turning the volume on the pad way down, and use the gain on your amp, and see if that minimizes the issue.
There is a pure audio signal for both channels on the 31 pin plug, but you would need a special cable to use it. I would bet they are available if you google. Although I have read that the 31 pin signal is not filtered like the headphone output, so while it is a pure audio output, there may be some noise in it that would need to be filtered.
Try google for a 31 pin cable. ( the input for the car is probably built to take a signal from a headphone output, while your amp may be expecting a lower power signal)
Similar Messages
-
I have a new 27" iMac with the 3.4 Ghz processor. I cannot move any iTunes files to my iPhone 5 because of the message in the subject line. Any idea why?
Hey amyroseofclyde,
Thanks for the question. After reviewing your post, it sounds like the iPhone is not appearing in iTunes. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iOS: Device not recognized in iTunes for OS X - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Why do I get this error when trying to use my bluetooth headset as a listening device? There was an error connecting to your audio device. Make sure it is turned on and in range. The audio portion of the program you were using may have to be restarted.
I may have already resolved this issue buy removing the device from my computer and re-pairing it. It is currently working just fine.
-
Getting error message when connecting to public wi-fi, why?
Getting error message when connecting to public wi-fi, why?
What error message?
Are you sure that the network is really public? -
Sound distortion when using hdmi cable
HP G62 notebook pc(Laptop) windows 7
I have sound distortion when i connect laptop to pc using HDMI cable, happens after 10 minutes then sound is ok again then 10 minutes later sound distortion again. Sound on laptop is ok. Not HDMI cable because used other laptops and its works fine.I'm having this issue as well. Just posting to let people know there is more than one person with this issue. I have a pavilion dv5 laptop
-
Why do I get this messge when I try to download Mtn Lion? "We could not complete your purchase. OS X Mountain Lion is not compatible with this computer." I am currently running Lion and have updated all Apps and Software. I have version 10.7.5.
Hi Mtn Mama,
Sounds like your Mac may not be compatible with OSX Mountain Lion. Here is a link with the list of compatible Macs:
http://www.apple.com/osx/specs/
GB -
TS1538 Why am i getting error 9006 when trying to restore my ipod 5th gen?
Why am i getting error 9006 when trying to restore my ipod 5th generation?
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process. -
Why am i getting error 5002 when trying to redeem a UV movie purchase?
Why am i getting error 5002 when trying to redeem a UV movie purchase?
Sharonc21 wrote:
If one is downloading directly to the iPhone via WiFi, it doesn't matter what version of iTunes is on the computer.
I decided to sync my phone to Outlook via iTunes. First thing, iTunes discovered that 7.0.3 was not on my phone. It asked if i wanted to install it. I said, "yes", and VOILA!! 7.0.3 is now installed on my iPhone.
So therein is the answer. Have no idea what bug is in there to keep it from loading to some phones directly via WiFi, but obviously, it is something!!
There is no bug. While you can update your iOS via wi-fi, it's recommended to do so via USB & iTunes. Depending on your wi-fi connection & singal strength, you can get errors. That's not a function specifically of the device. -
Why do i get error 1004 when trying to get ringtone?
why do i get error 1004 when trying to buy song(ringtone) on my iphone
Read this
Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Why do I get the message "error connecting to acrobat"?
Why am I getting the message "error connecting to the acrobat..." when I try to open a pdf file from the internet? I have the adobe reader installed on my tablet. This is something that just started happening. I did not have this problem before. I hope that someone can help.
Hi,
Thanks for writing to us. Are you able to view the file after this message? Is this message coming every time when you are trying to open a file from internet? If possible please share the file or link from where you are trying to open this file with us on [email protected] so that we can resolve the issue you are facing.
Thanks,
Shefali -
HT203421 why do i get error 1004 when trying to download mountain lion software?
why do i get error 1004 when trying to download mountain lion software?
Read this
Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.
You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV. -
The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?
Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again. -
Since upgrading to Mavericks I am finding that I am lucky to get 2 hours (when connected to WiFi) of use from my Macbook Pro. I have turned off Bluetooth ( which was not an issue previously), uninstalled Chrome, again not an issue before I upgraded, and have not seen any improvement.
I was using an older OS system (Snow Leopard) on my 2010 Macbook Pro. I am wondering now if the upgrade was an unwise move?jbuckworth,
which apps do you run under battery power? Are any of them identified as “apps using significant energy” when you click on the battery icon in the menu bar? If you have a 15-inch or 17-inch model, are your apps using the discrete GPU (which consumes more power than the integrated GPU)?
How many charge cycles has your battery accumulated?
How long have you had Mavericks installed? Is Spotlight still reïndexing your boot drive? (It does that whenever your OS is upgraded, because so many files change in an OS upgrade.) -
I am able to pick 4 videos from the Photo library in my iPhoneAPP but when i try to pick 5th one it throws an error:
"More than maximum 5 filtered album lists trying to register. This will fail,Why i am getting this error when i pick video from Photo library."Hello Tate r Bulic
I don't have any idea how to remove this error,can i pick more than 5 videos from the photo library...
If it's then please help me and gimme idea..Thanks
Maybe you are looking for
-
Ipod not recognised by computer or itunes...
My ipod nano has been working fine now for 7 months until a couple of days ago... the problem is that when i plug my ipod into the computer it doesnt get read by my computer or by itunes...there is no "do not disconnect" screen and there is no usb ac
-
How do I get tracks in the right order?
I've syncd my albums onto my Nano, but on one of them (a musical) the tracks are in the wrong order. I don't want the finale in the middle, etc. I've numbered the tracks, and in Itunes they appear in the right order, but on the Ipod they're mixed up.
-
Weird HttpsURLConnection problem
Hi everyone, I am running a struts application on jboss 3.2.1. Part of my application deals with posting xml over https. Two problems popped up today, and because they appeared at the same time, I have a hunch they're related. 1. Our production serve
-
Hi all! We have jspx-page. We are using ADF Faces HTML component <afh:frameBorderLayout>, which contains 2 <afh:frame> components for division of page content into areas. As a result html-page is generated, and it has 2 frames, but end user can NOT c
-
Hi. I'm creating a project that uses the MVC design pattern, and being eager to make sure I follow the best practices I have a couple of questions. When notifying a 'View' of changes to the 'Model' is it preferable to effect this notfication using th