Why am I given option to "convert selection to aac"?

Help with AAC and my library being added all at once to Itunes
I just downloaded Itunes 5.0 for the first time. I am about to purchase an Ipod. Most of my music was downloaded via napster and lots of it is wma protected (not sure if that is relevant to my question).
I then looked at the 200 or so tracks in my itunes library and I right clicked on the tracks and it gives me the option to convert to AAC.
Why does it give me that option? I thought this happened when I added all my tracks on my computer to Itunes?
Thanks,
Brad

CDMA phones don't work the way your asking. See this support article:
http://support.apple.com/kb/HT4515
Best of luck.

Similar Messages

HELP!! convert selection to AAC wont work

I NEED 2 KNOW HOW 2 DO THIS IT WONT WORK IT SAYS THAT THERE IS AN ERROR WHAT DO I NEED 2 DO?? I DOWNLOADED A VIDEO AND ITS ON I-TUNES BUT IT WONT PUT IT ON MY I-POD CAN ANY ONE HELP???!!??

HELP!! convert selection to AAC wont work
Why do you want to convert it to AAC?
Why not convert it for iPod?
IT SAYS THAT THERE IS AN ERROR
What exactly is the error?
I DOWNLOADED A VIDE
From iTunes Music Store?
What format is it now?

During "Convert Selection to AAC" get "The disk could not be read from..."

Hi,
I'm trying to convert an AIFF file to ACC using the "Convert Selection to AAC" menu command in iTunes 7.6. When I try it runs through the entire conversion but then at the very end an error pops up that says:
"Error occurred while converting the file. The disk could not be read from or written to."
I have never had this issue before but I did just upgrade to 10.5. I tried running "Repair Permissions" in Disk Utility but that did not fix the problem.
Thanks for any help!

I just experienced the same problem. I tried restarting. I tried repairing permissions. I tried excess profanity. Nothing worked. Then I read Diane Wordsmith's response, and when I went to the music folder on my hard drive, I discovered the actual problem.
Long ago, I had moved iTune's music library from my root drive to another internal hard drive. When I went to check the permissions of that folder, I discovered that this internal hard drive only had 27 MBs of empty file space left.
The disk could not be written to not because of a permissions problem but because of a *physical space* issue.
I changed iTune's music library, once again, to another--larger--internal hard drive, and, voila, the problem vanished.
I hope this helps.

Cant find i dont have convert selection to aac on itunes

hi ive download itunes and when i right click on the song i want on my iphone 3g it doesn't have convert selection to aac so what itunes do i need to download to see it thanks

To convert a song's file format:
1. Choose iTunes > Preferences, click General, and then click Import Settings.
2. In the Import Using pop-up menu, choose the format you want to convert songs to, and then click OK to save the settings.
3. Select one or more songs in your library and choose Advanced > Create [Format] Version.
The song in its original format and the newly converted song appear in your library.

Convert selection to AAC (iTunes 5)

After inserting a CD and then trying to covert selection to AAC I get the message "Could not convert the selected songs. The songs may be write-protected or of the wrong type" and then "Eror occured while converting the file. An unknown error occured (-48).
This never happened in previous version and yes I've tried various CDs - all give the above message?

You don't select the songs on a CD and then convert selection to AAC. You click on the Import button in the top right corner of the winder.

Convert selection for ipod?

When I right click a video file in my library, "convert selection does not show up". It just says "Convert selection to AAC" (which is my importing file-type.)
How do I get it to say "convert selection for ipod"??

Like someone else said, iTunes needs to be updated.
Also, know that the option only comes up if the video is not in iPod format.
The latest iTunes update...
iTunes Download Page
btabz

Convert selection(s) to ACC possible while iPod is connected to my computer

Hi all... I don't see how, but I would like to convert several albums (large AIFF files) already on my iPod to an ACC format. Must I delete the large files and reinstall the tunes in te ACC format? Thanks, JLMacintosh
PowerBook G4 1.67 Mac OS X (10.4.5) 3rd Gen iPod

If you have songs that are AIFF in your iTunes library, you can convert it using iTunes.
Go to iTunes prefs -> Advanced -> Importing and set it to the format and bit rate you want (I use AAC 160 kbps).
Select the songs you want to convert, go to menu Advanced and select Convert selection to AAC (Advanced Audio Codec (not ACC)).
It will convert and add the files to the library. The original AIFF files will still be there. Delete them from iTunes and the HD when it asks.
Resync the iPod.

Can I quickly convert WMA to AAC?

I am converting wma to aac and i am having to convert one song at a time. Is there anyway to select and convert an entire cd without having to convert each individual song? This is beating me down...

Click on the first track in the list and then while holding down the shift key click on the last one. This will highlight the selection, go to Advanced>Convert selection to AAC and it will do them all in turn.

How to convert select-options table into single field internal table

Hi,
My requirement is to convert select-options table into single internal table which has one field.
e.g. select-options: s_matnr for mara-matnr.
       select-options table can have options 'BT',"EQ", "NE", "GE", "GT", "LE", "LT", "CP" etc. select-options table
       have   Sign:I ,Option:BT, Low: 1, High.10.The new internal table records should be 1,2,3,4,5,6,7,8,9,10.
Please suggest any function module available for this scenario in SAP.
Thanks,
Somi.
Edited by: somi reddy satti on Sep 15, 2009 3:18 PM

Hi Sowmya,
Here is the answer if I understand well of your question.
Data: begin of gt_mon OCCURS 0,
              mon(2)             TYPE n,
         end of gt_mon.
Data: begin of gt_year OCCURS 0,
              year(4)             TYPE n,
         end of gt_year.
Select-options: s_period       FOR ptdw_pws_db-kmonth NO-EXTENSION
                                                                                DEFAULT sy-datum(6)
                                                                                TO sy-datum(6).
For example according to above statement period is 201110 is 201201.
Period field does n't exists in SAP for selection. If your selection is on date based on period which is given on the selection-screen then you need to convert the period to date by concatenating ( or using FM to convert )01 at the end of each period . You need to declare one range table for date to select the data from table.
loop at s_period.
gr_date-sign   = s_period-sign.
gr_date-option = s_period-option.
COncatenate s_period-low
                      '01'
into gr_date-high.
COncatenate s_period-high
                       '01'
into gr_date-low
append gr_date.
ENDloop.
Thanks,
Satheesh

'Convert Selection for iPod/iPhone' makes my movies silent. Why?

When I choose the 'Convert Selection for iPod/iPhone' option so that I can put my movies on my iPod, all of the audio becomes silent. The picture is fine and only the music/words go away.
Why? And, if there's a way, how can I fix it?
(These movies are either from a camera or from friends.... 'mpg' files.)

Thanks for the reply, but iTunes did not create a new file. I looked in Movies and in TV Shows, and in Music just to be careful, but there is still only one file, the one that doesn't play on my iPhone. I even looked in my iTunes Music folder for a file it may have created an just not imported, but there is nothing there either.

I'm trying to install an update to itunes that downloaded but can't complete installation as its trying to install onto D: drive. I don't have a D drive and i'm not given option of selecting the drive to install on. How can i select the drive that i want

I'm trying to install itunes but can't complete installation as its trying to install onto F: drive. I don't have a F drive and I'm not given option of selecting the drive to install on. How can I select the drive that i want to install on?

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable.

Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable. I've never had this happen before. I haven't used it for a few weeks, so maybe there's an update (Mac or otherwise) that's screwing things up? HELP!

I have an Edit In - Photoshop option, but not an Export - Photoshop option.
Obviously to have right-click Edit In to work, the photo you're right-clicking on needs to be selected. I assume this is not the problem, and that the photo is selected.
Mavericks 10.9.3 has a problem where the Users folder is hidden, and you need to update iTunes to fix it, but it's been a few weeks since this happened so hopefully you're up-to-date and the Users folder isn't hidden anymore.
If you can't get things to work, I'd uninstall LR and uninstall Photoshop, then install Photoshop, and update it, then install LR and update it, as a way to get any wayward security or other OS-level things reset.

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Why does the menu option change to "save as" after I select the print button?

why does the menu option change to "save as" after I select the print button?

>>The print command is selected in the File pull down menu, the print menu page pops up, I can then select my networked printer (which incidentally is confirmed to work with other software), the print command is in the bottom right hand corner and finally after depressing this print button a "save as" pop-up menu appears and then it only re-saves the file. Is this an issue with the pdf reader install?

Why can't I get the advanced selection available in EPUB export options in illustrator CC? It's just not there.... Neither is the image selection available. Only Epub reflowable and fixed layout, but not EPUB...

Why can't I get the advanced selection available in epub export options in illustrator cc? It's not there and neither is image selection. only epub reflowable and fixed layout but not just epub.. I don't know where it is to do some book exercises for my studies. Very frustrating.

This is the EPUB forum: InDesign EPUB

Why am I given option to "convert selection to aac"?

Similar Messages

Maybe you are looking for