Why am I having so much trouble with my iPad air 2 reading and remembering my fingerprints?

Why am I having so much trouble with my iPad air 2 reading and remembering my fingerprints? Even if I enter the same finger 5 times, it only works once or twice.

Try this -> http://m.facebook.com
which is the mobile optimized page of FaceBook.

Similar Messages

Why am I having so much trouble installing Flash Player 17?

Hello,
I have installed and updated Flash Player since 1999, but never with so much trouble as with the latest version- 17.
My pc runs Windows 7 64-bit with Internet Explorer 11. I have tried all the troubleshooting steps listed on the Adobe website with no luck.
I am logged in as administrator, but when I go to a website the permission message pops up at the bottom of the page, as normal after updating,
"This webpage wants to run the following add-on; ' Adobe Flash Player' from Adobe Systems Incorporated'.
Whether I click on Allow or click on the dropdown and click on Allow for all websites, does not matter. It will not work and the permission bar stays up.
Can somebody please help??
Thanks,
Dake

I replied to another instance of this post (Why am I having so much trouble installing the latest version of Flash Player to use in IE?). Locking this one.

Why am I having so much trouble downloading ios 5?

I can not download the ios 5 update to my Mom's iphone 3gs. I have tried from itunes. I have tried direct download. I have downloaded and used the internet download manager. I am still having difficulty in getting the update to download. It seems to get so far and stops. I can not figure out what to do next. I did mine without any problems, but I am having so much trouble with hers. I hope someone can help me. I appreciate the help in this matter.

See Here,
Updating to iOS 5
http://support.apple.com/kb/HT4972

Ever since I update my iPhone to ios 7 I been having so much trouble with it. I lost my contacts, my notes, I set a ringtone and it change it... What should I do?. I love iPhone but this is making me angry.

Ever since I update my iPhone to ios 7 I been having so much trouble with it. I lost all my contacts all the time, my notes, I set a ringtone and it change it... What should I do?. I love iPhone but this is making me angry. :(

Basic troubelshooting steps have not changed in iOS 7. Restart, reset, restore from backup, restore as new.

CanI downgrade back to the previous, non4.0 version? I am having too much trouble with 4.0

How can I downgrade back to the previous, non4.0 version? I am having too much trouble with 4.0, such as:
1) cannot save multible tabs in bookmarks
2) 4.0 is not faster, perhaps even slower
3) crashes often, especially when I scroll through my emails in Yahoo email.
4) Moved the "stop loading" and "refresh" buttons to the right, ala MS Internet Explorer. I liked your old location better.
Thank you,
Gary Bright

try this link http://www.mozilla.com/en-US/firefox/all-older.html
Uninstall 4.0. DO NOT CHECK "Remove my Firefox personal data"

Why am I having so much trouble installing the latest version of Flash Player to use in IE?

I have not had so much trouble updating Flash Player for Internet Explorer since I began in 1998. The plug-in for Google Chrome installed fine.
I tried uninstalling and reinstalling 4 times with no luck. The usual pop-up comes up when I open IE asking? 'This webpage wants to run the following add-on; 'Adobe Flash Player' from Adobe Systems Incorporated'.
I downloaded from the adobe.com website.
Can someone please help?
Windows 7 64-bit
Internet Explorer 11
Flash Player 17

I found this guidance over on the Windows forums. It seems promising for your scenario:
Make sure that the necessary add-ons are enabled in Internet Explorer. To do this, follow these steps:
a. On the Tools menu in Internet Explorer, click Internet Options.
b. Click the Programs tab, and then click Manage add-ons.
c. In the Currently loaded add-ons list, click Run without Permissions.
d. Look for the following add-ons in the list that's displayed. If any of these add-ons are listed, make sure the Status for each is listed as Enabled.
o Shockwave Active X Control
o Shockwave Flash Object
o Java Plug-in (may be multiple add-ons)
o QuickTime Plug-in (may be multiple add-ons)
o Windows Media Player
Hope this information helps. Reply with the status so that we could help you further.

I'm having so much trouble with my I.D account

I'm having sume trouble with my account I.D plz help.

If you say what the problems are then somebody on these forums might be able to help.

Why am I having so much trouble using Touch ID on my iPad Air 2?

I have loaded, deleted and reloading my fingerprint. It works about one time out of ten tries. Very frustrating. I usually have to use my password. What can I do to get it working properly?

See "Get Help with Touch ID" ...
Use Touch ID on iPhone and iPad - Apple Support

Trouble with my iPad Air

I've been trying to install a few apps to our new iPad Air. We had no issues for the first few, but now a "waiting" message shows beneath where the new app logo should be and it seems to freeze. I've also tried to link my iPad with my iMac and the Mac doesn'e pick up the iPad connection. I can't access or download from one to the other. What do I do?

To resolve the waiting problem First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Why am I having so much trouble signing in to g-mail, I realize I can skip and go into googlr but I haven't all day to play figure out the word. I am getting my apple e-mail with the e-mail g-mail gave me. You cannot reach google g-mail for support othe

INSTALLED LION ABOUT A MONTH AGO. AFTER THAT G-MAIL WOULD NOT TAKE MY E-MAIL ADDRESS OR CURRENT PASSWORD. I HAD TO RESET E-MAIL, CHANGE PASSWORD. SINCE THEN, FORGET ABOUT IT. I CANNOT SIGN IN WITH NEW E-MAIL, WHICH BY THE WAY THEY GAVE ME. NO WAY TO TALK TO PERSON AT GMAIL/GOOGLE, THEY JUST WANT YOU TO GAME WORDS ALL DAY. WHAT IS THE SOLUTION? CHANGE CARRIERS. I AM GETTING E-MAIL WITH NAME THEY GAVE ME, BUT I SUSPECT IT IS COMING THRU APPLE. AT THIS POINT I AM CRAZY. HELP

The is the forum for the Mac App Store. Apps for Mac computers.

Why am I having so much trouble signing in to Mozilla

Every time I try to sign in it will not take username and password so I have to change it and then I forget what I changed it to.
Also why can't I watch videos on facebook I can with Internet Explorer Windows 7

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
In the event that the passwords information is lost, you
should record all information in a separate text file somewhere else
on your hard drive, or written down. You can easily copy and paste if
you need to do so. If you are concerned about someone else looking
at that file, you can compress it using a password.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies<br>'''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Why do I have so much trouble with arrays

using the following query:
<cfloop index="loopCompanyNumberSet01Array" from="1"
to="#arrayLen(companyNumberSet01Array)#" step="1">
<cfquery name="qrySeriesList" datasource="erpdb01">
SELECT DISTINCT Left(t_item,2)
FROM
dbo.ttiitm001#companyNumberSet01Array[loopCompanyNumberSet01Array]#
ORDER BY 1
</cfquery>
</cfloop>
I can use cfdump and see that I am getting the results I
want, but I want to now take them and put them into an array (or
list) so I can use them for another set of querires
I tried:
<cfset seriesArray=arrayNew(1)>
<cfloop index="getSeriesList" from="1"
to="#arrayLen(qrySeriesList)#" step="1">
<cfloop query="#qrySeriesList[getSeriesList]#">
<cfset seriesArray[currentRow][1]=1>
</cfloop>
</cfloop>
but get error:
Object of type class coldfusion.sql.QueryTable cannot be used
as an array

jkgiven wrote:
> using the following query:
> <cfloop index="loopCompanyNumberSet01Array" from="1"
> to="#arrayLen(companyNumberSet01Array)#" step="1">
> <cfquery name="qrySeriesList"
datasource="erpdb01">
> SELECT DISTINCT Left(t_item,2)
> FROM
dbo.ttiitm001#companyNumberSet01Array[loopCompanyNumberSet01Array]#
> ORDER BY 1
> </cfquery>
> </cfloop>
>
> I can use cfdump and see that I am getting the results I
want, but I want to
> now take them and put them into an array (or list) so I
can use them for
> another set of querires
>
> I tried:
> <cfset seriesArray=arrayNew(1)>
> <cfloop index="getSeriesList" from="1"
to="#arrayLen(qrySeriesList)#" step="1">
> <cfloop query="#qrySeriesList[getSeriesList]#">
> <cfset seriesArray[currentRow][1]=1>
> </cfloop>
> </cfloop>
>
> but get error:
> Object of type class coldfusion.sql.QueryTable cannot be
used as an array
>
1) just use qrySeriesList.recordcount instead of your
arraylen(qrySeriesList)
2) even better: why use cfloop over query rows when
<cfoutput
query="qrySeriesList"> does just that?
... oh, i see what you are trying to do now...
ok, you will have to move the array populating code into your
first
cfloop, after the cfquery in it:
> <cfloop index="loopCompanyNumberSet01Array" from="1"
> to="#arrayLen(companyNumberSet01Array)#" step="1">
> <cfquery name="qrySeriesList"
datasource="erpdb01">
> SELECT DISTINCT Left(t_item,2)
> FROM
dbo.ttiitm001#companyNumberSet01Array[loopCompanyNumberSet01Array]#
> ORDER BY 1
> </cfquery>
move it into here
> </cfloop>
3) now, for your array populating script:
a)
> <cfset seriesArray=arrayNew(1)>
that declares a one-dimensional array
> <cfset seriesArray[currentRow][1]=1>
but here, i believe, you are populating it as a
two-dimensional array...
b)
> <cfloop index="getSeriesList" from="1"
to="#arrayLen(qrySeriesList)#" step="1">
instead of this loop, just use
<cfoutput query="qrySeriesList">...</cfoutput>
c)
> <cfloop query="#qrySeriesList[getSeriesList]#">
is this the line cf is complaining about?
you never set your qrySelectList to be distinct queries in
your first
loop. with its every iteration that loop just creates a new
qrySelectSeries, replacing the one created in the previous
iteration.
but once you move your array-setting code into the loop, you
will no
longer need this loop at all.
Azadi Saryev
Sabai-dee.com
Vientiane, Laos
http://www.sabai-dee.com

Having to much trouble with arch. What other distros do you recomend?

I've been trying to geet arch running flawlessly on my thinkpad x61 for the last month.
But I've run in to some problems that I can't solve.
The iwlwifi-4965-ucode drivers unstable and gives me kernelpanics. Tried to roll them back but nothing happend.
I'm having problems with my xorg. It worked flawlessly under kubuntu but in arch I get some strange lines when things moving horizontaly on my screen. Like the image is splitting into 2 pieces instead of one. Have been configuring my xorg for weeks without any result.
Feels like I need some other distro.
I like the whole from scratch idea.

timetrap wrote:
I think you misunderstand what a linux distro is. There is no secret sauce that makes one distro better than the other. They all have the same ingredients. What make distros different is how they put the same ingredients together.
I am assuming you went here http://www.linux-on-laptops.com/lenovo.html and looked at this http://pi-ist-genau-3.de/?page_id=344
And I am assuming you looked at this too (regarding your wireless) http://bugs.archlinux.org/task/10984
tried the xorg.conf from "debian on lenovo x61" and its a dualscreen configuration. And I actually had a 1680x1050 samsung syncmaster standing in a closet so I plugged it in and tried to play movies @ both screens and I get the same result on both screens no matter what mediaplayer I run. So something must be wrong with my intel driver?
My xorg.conf before I tested the dualscreen xorg, witch gives me the same problem.
Using xf86-video-intel driver.
And about the wifidrivers. A bug is allways a bug no matter if it's known or not. Still a problem.
Last edited by bredin (2008-08-18 20:14:30)

Can anybody please tell me i'm having so much trouble with app iphone , i've set up an id and billing .. but every time i try and get an app it says i haven't used account and goes through all billing crap again

why when i try and get an app does it tell me i haven't used the account before and try and take me through all the billing crap again ???? i haven't used it but how are you supposed to use it if it won't let you ???? this is my first i phone

Flash Player is free, and you might ask for help in Flash Player
This forum is about the Cloud as a delivery process, not about using individual programs... and as far as I know, Flash Player is a different, free, download
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

I set up everything I'm supposed to and all I get in no signal on my tv after I changed my input to HDMI 2 and plugged my apple box in? Why am I having so much trouble, anyone?

I set up my HDMI cable to my compatible tv, plugged it into my apple box, plugged the apple box to a power source then, then took my tv input changed it to the proper HDMI input and I get nothing but "no signal". The light on the box flashes when I first plug it in, then it stays on, why am I not getting a picture so I can configure and set up my apple box to stream netflix or YouTube ? What else could I possibly try? I've tried everything, switching everything out, making sure things are all the way in, why can't I get this box to work?

There may well be three possibilities here. The first is that the Apple TV is defective, I don't think many are, so this may be on likely.
The second is that you are simply making some mistake when selecting the HDMI channel on your TV. The third may be that your TV does not accept the default output from the Apple TV, in which case you might want to try the following.
Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it.

Why am I having so much trouble with my iPad air 2 reading and remembering my fingerprints?

Similar Messages

Maybe you are looking for