Why am i having this issue with scanner 5590?
Excuse me for my bad English please!!! OK, this scanner is connected to a PC and is shared so we can see all documents, great but here begins the problem:
1- scan documents
2-select format type
3-select PDF
Everything´s OK until that point, but when i try to see the documents scanned
This is what comes up when i try to see with adobe reader(no matter the versions):
ADOBE READER COULD NOT OPEN (name of the file) BECAUSE IT´S EITHER NOT A SUPPORTED FILE TYPE OR BECAUSE THE FILE HAS BEEN DAMAGED (IT WAS SENT AS A E-MAIL ATTACHMENT AND WASN´T CORRECTLY DECODED.
NOTE 1:
If i save the file with only 1 page the file opens and i can see the documents but when i try more than one page comes up the error!!! And if try to send it over the net the receptor can not see it due to the same error!!!
NOTE 2:
Rarely when i try to open the file with foxy reader it opens!!! without any problems.
I don´t know what´s the problem please help!!! It could be the way i´m saving the file? I just reinstalled the drivers and nothing!!! same old same
Adobe Reader is adhering to PDF specifications, while Foxit is not.
Michael was asking for the actual PDF file, not a screenshot of the error message; see http://forums.adobe.com/thread/918624
Similar Messages
-
Is anyone else having this issue with iMessages?
Hey there,
Is anybody else having the issue with iMessages or text messages, when you go back to the list of contacts… The search bar for messages shows it halfway every time?
The search bar shows up half way :/http://support.apple.com/kb/TS2755
Check out the section dealing with iMessage issues -
Have successfully updated 2 items and Safari the last both are having issues. Safari opens but then stalls. I have reset and restored the iPhone and I am seeing the same issues.
I just tested this on my wife's phone and you are right. I tested it time and again, changing the vibrate to ON and OFF and it consistently reproduces the problem, in line with the vibrate being on or off. You are a genius lol.
I had this issue on my phone too, but it disappeared when I followed the advice of a Genius.
When I asked my local Genius, he said it was a software issue and that a Restore followed by Create a new iPhone would remove the faulty/corrupted file that is causing the issue. He specified not to restore from backup, as the problem might still be resident within the backup.
I did this, and it seemed to work on her phone. Then it reappeared, so I'm still not sure what's going on. But your discovery defnitely holds true for her phone. My one seems to be okay regardless of the vibrate on or off now, even though I did exactly the same restore procedure on mine. -
Why am I having performance Issues with an upgrade from CS2 to CS5.5?
I am struggling hard with an upgrade from InDesign CS2 to CS5.5 (part of CS5.5 Design Standard)
There is a very slow response when trying to produce a 45 page document which needs many .jpeg images inserting, sometimes up to six on each 3-column page. While InDesign behaves sort of normally on text only pages, it slows to a virtual standstill when on the pages with images. (But this is what its for and I didn't have this problem with CS2!!)
Having read through some of the postings on this topic I have followed all the advice without success :-(
1) disable LSD in Preferences – Interface
2) disable thumbnail display in Pages
3) adjust view settings to Typical with Raster and Vector Images greyed out
4) disable Save Preview Images with Documents
5) check Links before opening documents
7) switch Preflight off
I shouldn't need to do all this should I???
I am operating with the following:
Packard Bell ixtreme M5740 64 bit
Intel Core i5 CPU [email protected]
4.0 GB RAM
ATII Radeon HD5570 graphics card 2779 MB available memory, 1024MB dedicated
plenty of free space – 274GB on c: drive and 296 GB on a D: drive
My hardware conforms to/exceeds the Indesign recommended hardware spec. Oh yes I am working on my local drive and I don't have these problems with Photoshop or Illustrator CS5.5.
Has anyone an idea about what's going on?
I've lost a good 6-8 hours so far trying to sort it out. Any help and observations will be gratefully received!Hi Peter
Thanks - I've found that the files were marked as 'hidden' and thus by switching them on gain I was able to recreate the original location. Regrettably this has had absolutely no effect on my problem. :-(
I have now created a fresh document, studiously linking all my images properly (similar number to a DK 'Eyewitness Travel Guide') and by the time I got halfway through its 80 pages, InDesign had slowed to a crawl - ie 15-20 seconds to respond to any command. It is clearly doing something that it thinks necessary despite all the 'workarounds' people have suggested. Please please Adobe what's going on??? -
I only have the desktop layout. As I was having such problems with the tablet and phone layouts. However there are banners and footers not reaching the edge of the screen. This is only a problem when accessing the site via a phone or tablet.
the site is www.excellententertainment.biz
Cheers
HughieDo a Select all on your pages (Most likely a master page if it effects all pages) and you will likely find an empty element or element that extends past the design edges in your desktop design.
-
These are some of the features you get with this toolbar:How It Works
Install & Earn
Earn $1.00 for installing the Toolbar
Search The Web & Earn Cash
Earn $.01 for every qualified search*, maximum of five per day.
Toolbar Features
Paid Email® Alerts
Get instant notifications of Paid Emails® and Surveys delivered straight to your desktop
Search
Get the best web search results plus earn cash in your InboxDollars® account
Promotions
Be alerted to the latest offers and promotions from InboxDollars®
Channels
Direct access to your favorites... Cash Offers, Cash Surveys & more
Earnings
Always know your current account balanceI also have this problem and never had it before. This scripts that become non responsive and there are more than just this one, really really cripples my system to the point where I have to wait 5 minutes between clicks in the web browser... When is FireFox going to address this issue?
This is the error message I get: Script: file:///G:/Program%20Files/Mozilla%20Firefox/components/nsLoginManager.js:302 -
There is an issue of receiving the pop windows stating that there is an problem with the script also. I get all of these problems when I am on facebook or even when I am logging onto my email account and the web.. At first it was not as bad, but has gotten more and more in the last couple of weeks..I tried the reset in the troubleshoot area to see maybe going back to the first default would help with Firefox,,but no..Please need some help with what to do..I have made sure that all of the plug ins are up to date. And deleted anything was not being used either application wise or plug ins. Thank you for any assistance with this problem.
Hi,
Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem. -
Anyone having this issue with mobile safari data lists not poping up?
So I have my XML data source lined up and I binder it to my list as a data array. Then, I set up the text boxes so that they dynamically set up. All how it was meant to be right? Well all I get is a little line where the list is supposed to begin. No list or anything. What is interesting is that it works perfectly fine with a normal safari app. Same data, same steps. Difference is that it just doesn't work!? I tried a new project, maybe it's corrupted but again! Nothing! I force streched the box through the CSS file and to my surprise I found that there was nothing there! I thought it might have been something with the appearance but no, didn't work.
Please try this yourself and let me know ith it works for you. Thanks! Oh and if you found a cure PLEASE PLEASE SAVE ME!I agree, and if you have a large amount of mail on the Gmail servers it might take over 24 hours to sync. I have about 18 GB of mail on Gmail and it took over 24 hours to sync. I went to Mailbox on the menu bar and forced the sync serval times, but I don't believe that speeded up the process. I first upgraded my Macbook Air and compared it with my iMac. There was a big differnce in the Inbox on my Macbook Air for several days. Now a week after the upgrade, all folders appeat to have synced. Next week I will probably upgrade my iMac to Mavericks.
-
I'm on my company website and all of the content appears much smaller than usual. I can't find Tools to adjust the appearance. I check on Internet Explorer and the same website looks normal.
Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/ -
Safari 5.1.7 keeps crashing (log points to Rapport) on my Mac OS X (10.7.4) Has anyone else having this issue with Trusteer Rapport?
Hello Mr. Jelfs,
Please note that Rapport is fully compatible with Mac OS Leopard, Snow Leopard and Lion.
We operate a 24\7, free of charge support team that will gladly answer any and all your questions and queries, and would be happy to assist with any problem reported.
We can be reached either via email to [email protected] , or by browsing to http://www.trusteer.com/support/report-problem .
Regards,
The Trusteer Technical Support team. -
Using Firefox, I can login and browse my financial institution website (NFCU) but I cannot pay bills. When I click the bill pay tab, the tab loads about 66% and then hangs (loading). I have let it load until NFCU asks me if I want to cancel the session, a much to long of a load time. Has anyone else reported having this issue with NFCU or Mozilla Firefox 3.6.18?
I have also posed the question to NFCU, currently awaiting response and will share what was given.jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport -
I am walking through Apples tutorial getting started with iOS development. I am at the storyboard area and can't seem to drag the cancel button to the green exit. I am not sure why the exit button doesn't except it. Is anyone else having this issue? Is there a work around? I have done this app twice and still cant get the exit to except the Cancel or Done bar buttons
Yes I checked it. As far as I can see I did everything Apple said to do. I took some screen shot so you can see how the screens are connected and what and where the code is, and what it does when I drag the cancel and done bar buttons to the exit
-
On some sites we get sec_error_unknown_issuer SSL error due to missing root certificate TC TrustCenter Class 2 L1 CA XI. Firefox is the only browser having this issue. Why is that certificate not preinstalled and shipped with Firefox?
Check sales.sauer-danfoss.com for details with Firefox 7.
Thanks
StefanYou are not sending the TC TrustCenter Class 2 L1 CA XI intermediate certificate
*http://sales.sauer-danfoss.com/
Web servers need to send all required intermediate certificates to build the chain to build-in root certificates.
You need to install that intermediate certificate on your server.
*http://www.trustcenter.de/en/infocenter/root_certificates.htm#3479
You can test the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/ -
I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped -
Hi, i am having an issue with a basic motion scroll effect.
I already watched and read every tutorial out there regarding this topic and even tried the adobe chat support, but the guy on the other end of the line disconnected me…, probably he didn't understand what i wanted from him because english is not my native language, so a will try to be very, very clear about this one..
please note, that i am new to muse, this is my first project ever.
my idea is as following:
when the customer comes to our companies site, he just sees our logo on a white Background. the logo consists of, say, four elements. when the customer scrolls down, the logo starts to disassamble: first the first part of the logo flies out the left side of the site, then the second part of the logo vanishes down, then the third part of the logo flies to the right, then the fourth part of the logo flies to the top and out of the customers view. given what i have seen, it is possible to do that….
so…..
now i have the four parts of my logo imported as png files into muse and assembled them in design view to build our companies logo. I select every one of the four parts and go into the scroll effects tab left beside the layers tab. first i enter the same values for every one of the four parts: initial motion: 0x and 0x again for the left and right motion; key position ( t-handle) : 0px; final motion: 0x and 0x again for the left and right value.
now i hit "preview".: the logo is "pinned" at the correct position, i can scroll but the logo stays where it is. so far so good….
now i select all the four elements again and go to the scroll effecs tab. at "final motion", i click the down arrows and enter 1x. I hit Preview…
when i am scrolling down the WHOLE logo goes down…. so far so good.
NOW i want the first part of the logo to go down, THEN the second part to go left, THEN the third part to go up, THEN the fourth part to go right.
so i select ONLY the first part, go to the scroll motion tab, at "final motion" i click the left arrows, then i enter 1x.( the up-down value, i set to 0 again).. i hit Preview…
the first part of the logo goes left as soon as i start scrolling, the other three parts still go down at the same time…
NOW i want the second part of the logo to start moving, when the first part has left the scene, not at the same time as the first part.
SO I SELECT THE SECOND PART AND DRAG ITS T-HANDLE (KEY POSITION) DOWN TO, LETS SAY, 200PX. SO IT STARTS MOVING ONLY AFTER THE CUSTOMER HAS REACHED THAT POINT, RIGHT?
BUT WHEN I PREVIEW THAT ****, THE LOGO IS NOT TOGETHER ANYMORE, THE SECOND PART IS FLOATING ANYWHERE ELSE BUT WHERE IT SHOULD BE…..WTFF????
short: when i move the t handle, the initial position of the object changes. thats what i said to the adobe employee, but he said, that thats the expected behavior….
but if thats so, how can i have my four parts correctly together, so they form my logo, but with different t handles, so that they all start to move at different times??
Pleeease help me, i am dying of frustration here…..:( that behavior cant be right, right?
Thanks so much to everyone who actually reads this post and tries to help…….
All the best,
Niki LapanThank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!!
Maybe you are looking for
-
I had iTunes on my old computer and I am trying to get all of the same music on my new computer. I have download iTunes and signed in, but it is not showing up in my library. How do I get all of my old music back?
-
Purchasing related apps after i change qccount email
When I discontinued using a email address that I had been using as my Apple ID I mistakingly thought that I would need to change the address used for my Apple ID. I thought that was the address the Apple Store and iTunes would use to communicate wit
-
Best practice for end user menu pages
Hi here is my goal : i want to add a link on the end user menu offering the user the ability to reset some LDAP fields (for example reset default values for mail settings after the user made a wrong customization). I saw all links on the end user men
-
Please ***Read*** or at least skim through before posting new questions
Before posting you should look through the various resources below for the answers to your questions. A lot of the "how to" questions are already answered in the material below.More detailed <a href="http://wiki.sdn.sap.com/wiki/display/HOME/RulesofE
-
Duplicate appointments in iCal from Mail
When I open an email .vcs attachment in Mail 1.3.11 it places 2 appointments in iCal 1.5.5 I found the script to remove duplicates but I am still having the same problem when I open .vcs attachment in Mail