Why am i having trouble getting audio with a VGA connector
I can connect my iPad 2 to my hd tv with a VGA connector and Netflix. why am I having trouble with audio?
VGA connector only sends the video component not the audio
Similar Messages
-
Having trouble getting started with my new shuffle
I am having trouble getting started with my new shuffle. any help?
Hey there Feisty59,
It sounds like you have a new iPod Shuffle, and want to know how to start using it. Here is a great resource for understanding how to use your iPod, and how to set it up and get music synced to it from iTunes:
iPod shuffle User Guide
http://manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User _Guide.pdf
If you have a different model of iPod Shuffle, choose yours from the following page and use that guide instead:
Apple - Support - Manuals
http://support.apple.com/manuals/#ipodshuffle
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I am having trouble getting audio from a DVD.
Initially when I insert the DVD i get audio playing. Then, I pair my bluetooth headphones, they say they are connected but I get no audio from the laptop speakers or from my headphones. I disconnect the headphones and still get no audio from the laptop. I have ejected the DVD and tried to start over and still have no audio. I would like to have audio from my bluetooth headphones because this is a workout DVD. Oh, I can get audio from itunes when my headphones are connected.
Thanks in advance!There are differences among MacBook models in that most cannot use audio over HDMI, and according to at least one answered reply here in ASC discussions, you'd need another cable or adapter for audio if you don't have a 2010 MacBook...
Here's a similar discussion with ideas, from a few years ago:
•I'm trying to hook my MacBook to my TV:
https://discussions.apple.com/message/16089168#16089168
You could check some of the similar discussion links to the right
of your posted question (this column) to see if other ideas are
offered; but this one seems to cover a general circumstance &
it may be workable if you get the correct parts.
Good luck & happy computing! -
Having trouble getting audio broadcasts on on my iPod
I am using iTunes 6 because, so far, I have not dared to upgrade to 7.0.1 or 7.0.2 (after reading discussions on the subject)
I am trying to populate my iPod with a three section audio program. The three sections are about 36 minutes each. Some time all three go on without problems, however, more often than not itunes will hang up on one of the 3 sections and freeze. When I go to the activity monitor I find one program stopped with the following message;
systemUIserver (not responding).
At this point I cannot get control of the computer to restart except by holding down the power key and that wipes out everything! Very frustrating!
Anybody have any idea what might be going on??
Dan Page
Maui, HawaiiTry a manual install, as outlined in link below.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
Why am I having trouble getting iOS 8?
I Downloaded iOS 8 first time on my 16gb ipod 5g and now it's making me download it again? Can anyone help with this problem? Thanks
Just what do you mean?
Was the iPod successfully updated and then something happened? -
There are text messages that I'm having trouble deleting. With some of my text messages, I can swipe to the left and delete ... or press and hold, get more and delete to trash can icon. But there are some where neither will work. Can't delete. Help!
But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync. -
Why am I having trouble running Adobe Flash Player 11 on my 2011 Macbook Air? I've downloaded and installed it repeatedly; yet when I try to open certain images online or play certain Youtube segments, I get the message, "You must have Adobe Flash 11..." My computer tells me it is installed and running.
If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
1. If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
2. If you're getting a "blocked plug-in" error, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
3. Triple-click the line below to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu. A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
4. Re-download and reinstall Flash. Download it from this page:
Adobe - Install Adobe Flash Player
Never download a Flash update from anywhere else.
5. If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked Enable plug-ins.
6. Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
7. In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane. -
I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit. Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??
Some clarification may help.
You say you cannot boot normally. It shows a gray screen with the Apple logo.
Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
How did you boot the machine to run Disk Utility? (Which keyboard combinations)? -
I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below. Any suggestions would help.
Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul -
hi all
im having trouble getting my laptop to connect to my mac using migration assistant. my mac has a code on the screen but my laptop doesnt respond and just says it waitng for my mac to respond.
any idea? pleaseHi Christina, belated welcome to Apple Discussions if nobody said it already.
I've had some experiences with these new flash memory recording camcorders, and I'll give you a quick rundown of what I've learned. Many of them (JVC, Panasonic, etc.) tend to record in a .MOD file format, which is non-standard, proprietary, and unrecognizable by most software. I thought Canon was usually a little more standards-compliant, but it appears they also use this .MOD format in your specific camera model. There are likely a couple ways we can get around this though!
In order to play the files, you will likely need to change their file format (.MOD) to .AVI manually. You'll have to locate the files on your Mac, and then manually change the file names so that the file extension (after the period) is .AVI
At that point, a video player application such as http://www.videolan.org/vlc/download-macosx.html>VLC should play the files fine!
You should be able to transfer new video files from the camera to the Macbook Pro with no problems as well. Just plug in the camera to the computer via USB, and also make sure the camera is plugged in to charge. Once it's plugged in, open iMovie (came with the MBP, in the Applications folder) and the MBP should take care of the rest.
Let me know if you have any success with any of this!
FYI, the thread that I got some of the above information from is here:
http://forums.macrumors.com/showthread.php?t=478326
--Travis -
Trying to record with an external mic, but having trouble getting a good record or playback volume. As far as i know all my settings in system preference are correct. What am i missing?
MartyJames777 wrote:
Trying to record with an external mic, but having trouble getting a good record or playback volume.
http://www.bulletsandbones.com/GB/GBFAQ.html#micline
(Let the page FULLY load. The link to your answer is at the top of your screen) -
I am trying to boot Ubuntu 12.4 on my iBook G4, but am having trouble getting my iBook to recognize the boot disk in the CD Drive.
I have pressed "C" during boot to force it to boot from the Optical Drive. It boots normally.
I have pressed "option" to get the boot menu. The only option available is my hard disk drive.
I have pressed "option""command""shift""delete" at the same time during boot to force it to skip booting the hard disk. I get a blinking smily face/question mark for a while, then it shows the boot menu, at which point the only available option is my hard disk drive.
In system preferences in OS X I have looked to change the boot drive, but the only option, again, is the hard disk.
Can I not boot from the Optical Drive?
Why?Hello,
From the link I provided it says:
Nearly all open-source software is available to download from the Ubuntu repositories, but the amount of proprietary software available for PowerPC linux is limited. You will have the same version of Firefox, LibreOffice, etc as other architectures.
Notable absentees are: Chrome/Chromium, Adobe Flash (although open-source alternatives are available, see below), Wine (however Qemu can be used, see below), ndiswrapper, proprietary video drivers and Dropbox (but, you can use Ubuntu One).
I do recall it being very limited when it came do downloading Linux software that supported PPC.
You wouldn't be any better off than using firefox or safari on Mac OS X 10.4.11.
If your looking for a faster and more compatible web browser then I would suggest the following, which I've recently found very useful on Mac OS X 10.4
http://www.floodgap.com/software/tenfourfox/
Hope this helps. -
Having trouble getting my bluetooth from iPhone 5 to connect with PolarH7 Heart Sensor.
Having trouble getting my bluetooth from iPhone 5 to connect with PolarH7 Heart Sensor. when in settings Bluetooth is on but not reading devide ( it satyas at Now Discoverable) .
bradbev,
Welcome to the community! Thanks to everyone for the help. I do agree that adding and removing the Yahoo! e-mail account is the best first step to get this resolved. Below I have the steps to remove and re-add the account.
Remove a Personal Email Account
Add a Personal Email Account
Thank you!
AdamE_VZW
Follow Us on Twitter @VZWSupport -
Why am I having trouble signing in to iTunes with my AppleID? I change it
Why am I having trouble signing in to iTunes with my AppleID? Once I go through the motions to reset my password on Apple's website & go back to iTunes, I still can't sign on. Should I have two passwords? Is there something I'm missing??
Yep. Good point.
To completely shut it down, even in the background, double click the home button to display the row of apps. Then press and hold the Facetime app until the app displays a minus sign. then touch the minus sign.
The app is now stopped !
Maybe you are looking for
-
[SOLVED] Ndiswrapper, NetworkManager 0.7 and 64-bit Arch Linux
Hi there! I am having problems configuring my wireless card. I know I have to use Ndiswrapper, and this is what I have tried to do; however, it didn't go quite well. This is rather odd because it worked perfectly in the 32-bit version of Arch Linux,
-
Error in Rush Order type with BOM item!!
Hello, I am facing a very strange error while creating a rush Order with BOM item. System Error: 1. No item category available (Table T184 SO ERLA TAQ). I except the error. I get next error as 2. Structure explosion for item 000010 is not possible. A
-
Oracle Java Mail API exception in Jdev 11.1.15
we are using java mail api to send out emails. and wrap it in java embedding with in our webservice. we are using jdeveloper 11.1.1.5 for this and the Java API is failing with the below error, we have included all the java libraries. As code is worki
-
i am using below query in a procedure i.e open result for SELECT get_clob_value (table_name, KEY) as codes......."result" is out parameter with sys_refcursor as datatype(i.e result out sys_refcursor) in the below query get_clob_value is a function SE
-
Exchanging data between different browser windows
Hi, It´s possible to eschange data between iviews that are in diferrent browser windows, using databag or Portal event functions? I want do save data in Databag or fire a event in Webdynpro application. After it, another application (webdynpro for ja