Why am I not able to select just one line on certain pages of Adobe reader?
I can select and highlight just one line on most pages of a PDF in Adobe Reader 10.1.2 on a Mac OS X, but for some reason there are a few pages which make me select three or four lines. Why is this?
1. Was Lion on the machine and trying to downgrade?
2. If so this might be an issue. Newer machines are done for current OSX.
3. If you have Lion on your machine try to install Snow Leopard on another partition or portable HD
4. After you format and install SL on the other partition or drive Try to boot from this machine retarting and holding the Option key at boot up.
5. See if that work.
This is a trial and error way but Mountain Lion is right around the corner and Snow Leopard is 2+ yrs old.
Brian
Similar Messages
-
HT4906 In iCloud system preferences why am I not able to select iPhoto Streams?
When I go to turn on Iphoto stream in iCloud system preferences on my MacBook Pro I am not able to select the iPhoto Stream option, and it is the only option that seems to me made unavailable to me.
How do I fix this so my iPhone photos start streaming to my MacBook???What version of iPhoto are your running? Do you have Photo Stream enabled in iPhoto?
Log out of iCloud in the System/iCloud preference pane aand log back in.
OT -
Why I am not able to copy doc. when safari switches to pages?
I am having a great deal of difficulty when trying to copy a document from a government contact because the safari immediately switches to pages (not my choice) and Pages won't allow copying because I am not signed up for iWork. Susan
HI,
First off.
Somehow you have posted in Apple Communities > Applications > iChat
I don't use Safari every day.
In Firefox though I can set in the Preferences for the app which apps open certain files you come across on the Internet
So therefore I go to Firefox > Preferences > Applications and Word items are in fact set to Always Ask
I could choose either Pages or Word as I have both or even another Word Processor app that will open .doc items. TextEdit may possibly be able to show you the Text even if it does not remain Formatted.
I cannot see an similar Settings in Safari.
If Safari is downloading the item then you may be able to Right/Control Click it to see the Open With Option (Instead of double clicking it)
You may get a more informed answer from the Safari community here
8:58 PM Saturday; June 18, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.7)
Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Publishing photo to MobileMe, not able to select one album
Hello, since the 3.0 update, I am not able to select just one album to upload a photo... By default it puts the checkmark next to the first album, and then I select a different album, but the checkmark never removes itself from the first... is this a confirmed bug?
I get the same problematic behavior. I can work around it by selecting, one by one, each successive album below the first one, which moves the checkmark down one album at a time until I can stop at the one I want. But that is clearly a major nuisance. I'd love to know how to fix this. On the more positive note, the videos I have tested post faster than I would expect, and work fine.
-
We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up
From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions. -
Why am I not able to export NEF files to Photoshop from Lightroom to edit. This is new. When I right click on an image, the export to PS option is not selectable. I've never had this happen before. I haven't used it for a few weeks, so maybe there's an update (Mac or otherwise) that's screwing things up? HELP!
I have an Edit In - Photoshop option, but not an Export - Photoshop option.
Obviously to have right-click Edit In to work, the photo you're right-clicking on needs to be selected. I assume this is not the problem, and that the photo is selected.
Mavericks 10.9.3 has a problem where the Users folder is hidden, and you need to update iTunes to fix it, but it's been a few weeks since this happened so hopefully you're up-to-date and the Users folder isn't hidden anymore.
If you can't get things to work, I'd uninstall LR and uninstall Photoshop, then install Photoshop, and update it, then install LR and update it, as a way to get any wayward security or other OS-level things reset. -
HT201364 why am I not able to download the mavericks system... I just bought my computer right now.
Why am I not able to download the mavericks system? I just bought my computer right now.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare.
Best. -
Logic Pro 9 - Not able to select plugins via Inserts / Audio Units.
Hi
I have the program Logic Pro 9 version 9.1.6 (1700.43) (32- bit)
I use plugins like for example SampleTank and Realstrat . Everything has until recently worked fine, but I now have a problem.
When I choose a plugin I usually put the mouse on the box 'Inserts', press ALT and then a menu appears. Here I, among many menu items, at the bottom see ' Audio Units ' . At this point I usually could choose, for example SampleTank , .. but now I can only choose Apple features. That is to say - I can not choose my plugins in this menu anymore.
I've been around online and search . Here I was recommended to delete a file called com.apple.audiounits.cache . I have done this, but the problem is not solved.
I also have updated the operating system with latest MacOSX10.7.5 update . This has not helped .
All my plugins are also visible in Logic Audio Units Manager, and I can see that they are being loaded when Logic starts up.
The plugins also still works in projects created within the problem occurred. That is, - I can open for example SampleTank in a track in a project that is created and a half years ago.
So the exact problem is that I, in new projects, is not able to select plugins via Inserts / Audio Units .
Can you help me solve this problem?
Regards HenrikHekke44 wrote:
I do not think it is very user friendly, I must say.
For users of this system, it must surely be obvious that you very often have to choose musical instruments, also from instrument plug-ins.
Yes, often. That is why it is very obvious and simple for any experienced user.
Hekke44 wrote:
Why on earth is it so complicated to choose a musical instrument? If you are not currently using this system every day, you forget the such a detail about having to press down for several seconds to select an instrument.
I do not think it is complicated at all. And you do not have to press down for several seconds. I just timed, it is 0.4 seconds of clickholding. The holding is functional: you won't load a new instrument (and possiblly loose any work you had done on your sound) just because you accidentally clicked on a slot.
Hekke44 wrote:
There should be a nice big green button on the screen that read 'Select musical instrument', - then a menu where you can choose whether it should be one of Logics musical instruments, or a plugin instrument.
It would be user-friendly.
What is your view about these things?
You are basically saying it should be dumbed down to the level of some "any-kid-or-adult-idiot-can-use-it-out-of-the-box" smartphone app. I think you are overlooking that this is a Pro program, not a toy. I think you try to blame the software for the fact that you didn't know how to operate it. You're avoiding responsability. That's my view. -
I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
I've just had my hard drive go caput and after purchasing a new one was inclined to install snow leopard but received an error message when attempting to do so.
I did not create a back up or restore file before I decided to upgrade from snow leopard.
I'm wondering why am I not able to simply install snow leopard on a brand new hard drive. What would clue it into me having had ran lion before and why can't I simply delete that kernel or said file. It makes completely no sense to me. I come from a pc world where if I choose to format a hard drive, I can do a clean install of whatever OS I choose. After all I only paid for my laptop as should be able to do with it what I wish.
Any suggestions or insight would be greatly appreciated1. Was Lion on the machine and trying to downgrade?
2. If so this might be an issue. Newer machines are done for current OSX.
3. If you have Lion on your machine try to install Snow Leopard on another partition or portable HD
4. After you format and install SL on the other partition or drive Try to boot from this machine retarting and holding the Option key at boot up.
5. See if that work.
This is a trial and error way but Mountain Lion is right around the corner and Snow Leopard is 2+ yrs old.
Brian -
Not able to select images in iphoto 8????
Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
Please help
Thank you in advanceTHe basic answer is to export them to a desktop folder and access them form there
for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
Larry Nebel -
I'm having trouble connecting to apps, itunes store, internet on my iPhone 5 running iOS 7.0.4. I am currently connected to a perfectly running WiFI connection. This just started happening today (2/19/14)! Why am I not able to connect anything? I've tried ALL the fixes suggested. HELP!!!!!!!!! BTW, I know my Wi-Fi connection is good because I'm using it on my desktop and other people in my office are also connected on their iPhones and desktops. Again, HELP!!!!
You may not really be connected to your WiFi network.
Your router may not have given your iPhone a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPhone (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
i'm trying to redeem my itunes gift card and i get the message "session timed out." does anyone know why i'm not able to redeem my card and why i get this message in stead?
I've been having the same issues too, and thought it was just my outdated computer or account?!
Every time I try to purchase a song, "session has timed out" shows up after I click "agree" to the terms!? I seem to be in the exact same scenario as 'SportsBarn' above: Itunes support have replied repeatedly with the same "solutions" but nothing has helped or even been applicable. I have an older laptop, 2005 Powerbook running OS X 10.4 Tiger so it's not compatible with the latest iTunes 10.5.2 which requires minimum OS X 10.5. I've been using the balance already in my iTunes account (from redeemed giftcards over the past few years) with no problem, until recently (my last successful purchase was October 2011). I wonder if it's the older OS or just a redemption glitch even with newer computers? -
Why am i not able to buy anything from my iphone?
when ever i try to buy gems for my game it tells me you purchase could not be completed.
For assistance contact itunes support at www.aoole.com/support/itunes/ww/
and when i go there i chose my contury (usa) and it just leads me to itunes why am i not able to buy anything????
please help.http://www.apple.com/support/itunes/contact/
-
Why we are not able to download javatv api's
why we are not able to download javatv api's
Do you mean the download urls for the Java TV binary and source stuff?
("download.oracle.com/otndocs/jcp/javatv-1.1-src-mr-oth-JPR/" and "download.oracle.com/otndocs/jcp/java_tv-1.1.1-mrel-oth-JSpec/")
If so, when you try downloading, and you get the "You have no access..." screen, just refresh the browser, and you will get to the page for downloading the source and docs.
By the way, I think Java TV is more or less dead.
I doubt the site has been maintained for some years, and the SUN -> Oracle move did not improve link consistency :)
Good luck!
Maybe you are looking for
-
"No bootable devices" screen after Windows 7 Boot Camp failure.
As a lifetime Windows user, I thought that it would not be such a bad idea to install Windows 7 via Boot Camp Assistant. The process went smoothly until I reached the 3rd and final section of the procedure titled "Install Windows 7 or Later Version.
-
Keep getting an HP update for 10.6.8 and I'm on Lion. How do I stop this?
My MacBook Pro came with OS Lion installed, but almost every day, I get a notification to download and update for the previous OS for my HP printer. How do I stop this from trying to install on mt system?
-
Open secured adobe pdf documents
How do i open secured adobe pdf documents on a surface touch rt with windows 8?
-
In Chrome, It can´t read Shockwave Flash. or, "Det gick inte att läsa in Shockwave Flash
Whay is wrong and what to do. Please help me. Gunnar
-
Removing powerpoint from startup
Everytime I start my mothers computer Powerpoint starts up. I have looked at PP preferences but it doesn't say anywhere how to stop it from starting when the computer is powered on. Am I looking in the wrong place?