Why am I not seeing Adobe PDF as an option in my Dialog Box?

I am trying to prepare a booklet for print. After selecting Print Booklet option, the Adobe pdf option is no longer in my Print Dialog Box. I need to send this file to a printer so it must be formated as the pdf. Why am I not seeing  Adobe PDF as an option in my Dialog Box?

see InDesignSecrets » Blog Archive » Acrobat’s Adobe PDF Printer Replaced in Snow Leopard and Creating PostScript Files in Snow Leopard for Older Print Workflows | InDesignSecrets
and be sure you read the comments (and you may need to jump through some hoops to see the early ones)

Similar Messages

  • How to turn off "Adobe PDF settings for Autodes AutoCAD documents" dialog box between pages of a batch conversion?  There is a check box for this purpose, but it is grayed out, and of course unusable?!

    How to turn off "Adobe PDF settings for Autodes AutoCAD documents" dialog box between pages of a batch conversion?  There is a check box for this purpose, but it is grayed out, and of course unusable?!

    How to turn off "Adobe PDF settings for Autodes AutoCAD documents" dialog box between pages of a batch conversion?  There is a check box for this purpose, but it is grayed out, and of course unusable?!

  • Why can I not see Paypal as a payment option in iTunes account?

    According to the Apple website itself I can select my Paypal account for iTunes Store purchases. However, following the instructions on said site to enable this, Paypal is not displayed in payment options. Is it only available to U.S. iTuners?

    Gunshot72 wrote:
    Is it only available to U.S. iTuners?
    Yes, currently PayPal is only available as a payment option if you're in the U.S.

  • Why dont i ever see downloaded pdfs in the "documents section" in adobe reader on my ipad?

    Why dont i ever see downloaded pdfs in the "documents section" in adobe reader on my ipad? They only stay in the Acrobat.com section and when I try to move them the "documents" partion is not listed as an option. Only the folders i have within acrobat.com are listed

    The pdfs have been uploaded to Acrobat .com (from my computer) I open the Adobe reader on my ipad and see them in the acrobat partition of the reader. I tap on them and they open.  To test whether they were truly downloaded ,I turn off wifi and they still open. I consider this "downloaded" BUT... they stay in the acrobat.com partition of the reader. Nothing ever goes or lives in the "Documents" partition..nor can I move anything there.....Why not? What is the"documents" partition there for if nothing lives or can be moved there?

  • Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

    Why can I not create a PDF from a web page on my Adobe Acrobat 8 Pro on my new Windows 8 computer? It worked fine on my windows XP system?

    Acrobat 8 is not compatible with Windows 8,  for the simple reason it was
    created much before it and Adobe could not participate the changes to the
    OS that Microsoft implemented many years later on. You need to buy the
    current version for compatibility.

  • When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

    When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
    i am on a Windows 7 professional PC, 64-bit.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Why does Lightroom not see my teathered camera in Windows 8?

    When I teather my Nikon D300 in Lightroom 4, It seem as the Windows 8 operating systems takes over the function and Lightroom does not automatically open captured image.  Instead, Windows' picture window appears.  I have not been able to figure out how to override the windows function so that Lightroom opens the captured image.  Need Help!!!

    Where is that in the menu...couldn't locate it?
    Sent via the Samsung Galaxy S™III, an AT&T 4G LTE smartphonessprengel <[email protected]> wrote:Re: Why does Lightroom not see my teathered camera in Windows 8?
    created by ssprengel in Photoshop Lightroom - View the full discussion
    Also make sure you have your camera set to Point-to-Point not Mass-Storage mode:
    Menu/Wrench/USB/'M/P'
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5226836#5226836
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5226836#5226836
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5226836#5226836. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Why I don't see Adobe After Effects in Adobe Cloud? Help, plz!

    Why I don't see Adobe After Effects in Adobe Cloud? Help, plz!

    It simply means your system does not meet the requirements. Check them on the AE product page.
    Mylenium

  • Adobe PDF Converter Advanced Options not sticking

    I am having trouble getting decent quality pdfs printed from autocad - specifically of materials that are themselves pdf's placed into autocad. The information is typical pdf vectors - I can snap to the linework inside the documents, but when I actually plot them I am getting fuzzy rasters.
    I am trying to fiddle with the setting in the plotter properties and nested a few menus in are some settings called Adobe PDF Converter Advanced Options - there I can change DPI, ICM intent and Posctrcipt options...the problem is the settings don't stick. I change something, and then go back in to the menus and they are exactly as I first found them.
    there are two problems here - one, printing pdfs of pdfs not producing very good quality, and two, having trouble getting settings to stay set...

    I pretty much agree. However, print quality can be a big one. I use 300 dpi and many folks recommend 600 dpi. The 1200 dpi is way beyond what is normally needed. One place where the 1200 is a major problem is in preparation of slides in PDF. If you have line drawing with color lines of 1 pixel, they will be 1200 dpi. Imagine the problems when displaying on a 96 dpi monitor, a factor of more than 12 fewer pixels. A 1 pixel yellow line is almost unreadable because of the way that the line is sampled for display. If 300 dpi is used for print quality, then there is no problem. I found this one out the hard way.
    Most of the other settings you would leave alone, or change someplace else.
    In your sample DOC file from another post, your A4 came out as letter for me. The paper set in the DOC file is A4. My default in Acrobat is letter. Thus, WORD does NOT override the printer setting. You have to set the paper in the printer separately, similar to putting the proper paper in the printer.
    I am still struggling with all the differences you are trying to point out on your other post. There are differences, but I am not totally sure of the reason. You might want to look at a page audit under the PDF optimize to see were teh resources are being used.

  • Why i can not see the columns of "Tax Category" in transaction code FS00

    Dear Experts,
          Why i can not see the columns of "Tax Category" and "Posting without tax allowed" in tab of "Control Data"  transaction code FS00?
           How can i add the columns of "Tax Category" and "Posting without tax allowed"?
    Looking forward to your reply.
    Best Regards,
    Merry

    Hi,
    Go to transaction OBD4, and check whether the field "Tax category" is suppressed in group "Account control" for your GL account group.
    If not, then go to OB26 and check the field status for the same field for create, change activity.
    Regards,
    Gaurav

  • Why can I not print a PDF from an email?

    Why can I not print a PDF from an email any longer?

    Can you explain in better detail?
    Is it when you open the file attachment and attempt to Print?
    Is it right-mouse clicking and attempting to Print?
    Is it when you print the email itself and expect the attachment to Print?

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

  • Why can't I get adobe pdf translator to open?

    why can't I get adobe pdf translator to open?

    Perhaps because you don't know what you have (because there is no product called "adobe pdf translator"), Also perhaps because you aren't in a place to get support from Adobe. If you'd like us in the community to try to help, we might, if you can help us understand what is wrong. What is the specific product you are trying to use, and what happens when you try to use it. Please give any error messages exactly.

  • Why can I not see any of my music purchases, I have not changed my ID or account details

    Why can I not see any of my music purchases, I have not changed my ID or account details?

    Hi,
    Please enable Speakers in Playback devices as follows:
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    I imported 635 images into an iPhoto album so that I can share them via a photo-stream. However, iPhoto says there are only 600. When I try to add the missing images it says they are already there. Why can i not see these images in iPhoto?

    Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
    It sounds like you are using two methods to upload to Facebook:
    1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
    2. Exporting pics and uploading to Facebook from the browser.
    I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
    I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
    Your problem is not with Aperture, it is using Facebook for showing your work.
    If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
    If you insist to use Facebook as your way to share your work, then your workflow should be this:
    1. Right click images you want to share.
    2. Select Export version.
    3. Export as 100% size and ensure the export settings are set at 100% quality.
    4. Upload this pic into Facebook.
    This will get you the best image size and resolution on Facebook.
    See how you go.

Maybe you are looking for