Why am I only able to upload 10 seconds of my 12 minute video onto Youtube?

I'm using Premier Elements 10. I've uploaded videos to Youtube many times in the past with no issues. Video file size is 130M and it is 12 minutes in length. I'm doing this from the "share" tab and when I upload the video, Elements goes through the normal steps of upload, rendering, etc (although it goes much quicker than it should). When I get the completed message, I check Youtube and only 10 seconds of the video has uploaded. The last two attempts produced a "transcoder error". I also cannot burn a DVD or save the file on my hard drive. When trying to burn a DVD a message pops up "Export error - Error compiling movie. Unknown error."  Any suggestions?

Bill,
Done.
That usually happens, when one posts via e-mail, and a sig has been set up. Most often, the OP does not even see that sig, or they might not pick up on the potential for problems. Had I observed that, before I did a Reply, you could have made the change, but once I Replied to the post, you lost that capability. It was my bad, to not take notice, and just did the Reply to your original post. Sorry about that.
Good luck,
Hunt

Similar Messages

  • Why am I only able to browse the free category of books in ibooks

    Hi
    Would anyone able to advise me why am I only able to browse only the free category of books on my ip4? I tried to delete my ibooks, re-install but i'm still only able to browse the free category of books. There is no noticable button/icon for me to click to change for the paid category.
    Pls help!

    Are you sure there is any paid content yet for your region?

  • Why would flash only buffer for 5 seconds on espn following ads?

    I'm having an issue with flash video playback on espn.com. Ads will play and the the video will buffer and play for only 5 seconds exactly. Sound and video are fine in the ad. This happens for me on chrome, firefox and safari. I uninstalled and reinstalled flash with no effect. Local storage setting are fine (and I tried clearing them as well. Other videos with ads play fine on other sites, it seems to be espn.com specifically. I'm running Yosemite 10.10 and flash NPAPI Plug-in version 16.0.0.257. Any thoughts? I need help!

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Why was I only able to sent 5 photos by email?

    I was only able to email five photos on my iPad mini.  Why

    Mailing is limited to max. five photos at a time - probably to prevent the size of the mail from exceeding the limits on the server.
    The iPad User Guide is not very clear about the limits, it only says:  http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
    Share photos, videos, and more
    You can send photos, videos, locations, contact info, and voice memos. The size limit of attachments is determined by your service provider—iPad compresses photo and video attachments if necessary.

  • Why am I not able to upload my video nor am I able to watch a video on Facebook with my mac.

    I am unable to upload my videos nor am I able to watch videos ( it shows me HMTL5) on facebook.
    I am alsohaving trouble editing my photo on photobucket.This one shows flash
    Not sure why it's doing this...
                                             PLEASE HELP!!!
                                                 Thanks Julie

    Make sure that you installed the current version of flash player. If you click on the mentioned "flash", you should be directed to adobe's website, where you can download the current version of flash player. After downloading it, make sure to install it as well. This should solve the issue with your photobucket.

  • Why am I only able to see the 12 most recent emails in my inbox and no more?

    I can only see the last 12 most recent emails in my inbox and no more?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • How does the EDB handle deleted items and why am I only able to recover some and not all previously deleted emails?

    Hello,
    I have been unable to locate information regarding how the EDB handles deleted files.  I am able to recover deleted emails from the EDB; however, there are numerous emails that I know have been deleted, that were not recovered during the recovery process.
     Is this because the EDB dumps deleted emails once it reaches a certain amount of entries?  Or is it more likely the deleted items are corrupted and thus not recoverable?  Thank you for your time and I look forward to your responses.  The
    product in question is Microsoft Exchange Server 2007.

    Great information from the other posters and one other possible explanation is if the users did a HARD DELETE.  More information on this below
    Pre-Exchange 2010 Dumpster 1.0 worked as follows;
    1. When a user does a normal delete of an item via Outlook or OWA it gets sent to your deleted items folder
    2. If the user then empties deleted items folder those items are then marked with the ptagDeletedOnFlag attribute which in essence hides them from the view of the user
    3. At this point the user can use the Recover Deleted Items function in Outlook to recover those items as long as the items were NOT purged using the Recover Deleted Items option OR the items have not passed still the deleted item retention period.
    NOTE: Every day there is a nightly maintenance process that in short looks through  the DB and examines items that have been deleted. Items that have met or exceeded the deleted item retention period are purged from the system and are
    completely non-recoverable.  More about this at the end of my post.
    4. However if the end user were to  delete an item from the Inbox or another folder in Outlook by using Shift + Delete aka a Hard Deletion the item is left in its orignal location and gets marked with the ptagDeletedOnFlag attribute which again just
    hides it from view.
    5. By default you can only use the Recover Deleted Items option on the Delted Items folder.  Howeve you can make it so that you can recover hard Deleted items from other folders.  More on that here http://support.microsoft.com/kb/246153
    5. The problem with this method though IMO is that you have to know where to look and that can be rather time consuming.
    6. If you want a more elegant method to resolve this and are open to using 3rd party utilities check out Lucid8's DigiScope. 
    http://www.lucid8.com/product/digiscope.asp which will allow you to open any offline copy of the DB from a forensic point of view and to solve your specific issue you can either turn on a filter to ONLY
    show hard deleted items OR you can search the entire store and all mailboxes for just deleted items and can then view or export them to PST or MSG format.  You can download the product and obtain a 30 day demo license which will allow you to find any
    hard deleted items, however to view them or export your would need to purchase a license.
    NOTE: When a database is backed up or copied it is an "Offline" database and then its offline the data retention period is not an issue because the nightly online maintenance process can only act on a database that is mounted on an
    Exchange server.  So for this reason if you want to recover the most data possible use offline copies/backups of the DB with a 3rd party utility like DigiScope
    NOTE 2: Exchange 2010 and 2013 use Dumpster 2.0 which is an entirely different beast and I will not go into that in this post since its nearly 1AM  however DigiScope can expose that information as well
    Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
    --> 2007 --> 2010 --> 2013 with Lucid8's
    DigiScope

  • Why am I only able to download a trial with the Photoshop Photography Program

    I registered for the Photoshop Photography Program in December - then had to change payment methods. Now my charge monthly is more - and I am unable to download a legit photoshop -only a trial

    Hi Tcom,
    Welcome to Adobe Forum,
    Have you tried logging out & logging back in of the CC desktop app?
    Have you clicked on "license this software" when you get a prompt of purchasing CC?
    Please try these steps, if the issue is still not resolved, do message me privately the order number, Email ID with which it is registered.
    I will follow it up for you.
    Regards,
    Rajshree

  • Why am I only able to edit new videos added to my ipod

    I had to reinstall itunes to a new computer and now it wont allow me to edit certain videos to tv shows

    Most likely those items are in Flash which the iPad can't play, but that's just a guess since I have no way of knowing unless you can tell us the site from which the ecard came and give us the URL to your meeting's video.
    Regards.

  • Why am I only able to post a comment on Facebook only after I click on the "reload current page button"?

    This problem just started a couple of days ago. I had no problems before doing these simple tasks before. It is quite annoying to me that I have to continually click on the "reload current page" button each and every time I want to post a comment on Facebook. Does anyone know what the problem may be?

    I notice you turned off the setting that diverts new windows to a new tab. Since the new window will open in front of your current tab, it may appear that the current tab was closed, when in fact it is behind the new window. This hard to explain in words.
    Do you want to switch the setting?
    orange Firefox button (or Tools menu) > Options > Tabs
    Check the box for "Open new windows in a new tab instead"
    Does that help?

  • Why am I not able to upload shows/movies onto my nano Gen. 7?

    Every time I try to, I get an error stating that I can't download it onto this kind of ipod, but I'm pretty freakin sure I can.

    Hi there,
    This often occurs because the video is the incorrect format. Take a look at the article below for some more infomation on how to convert that to an iPod friendly format.
    iTunes 11 for Mac: If you can’t sync a video
    http://support.apple.com/kb/PH12119
    Hope that helps,
    Griff W.

  • Why won't IMovie upload my videos onto YouTube in HD?

    I'm using my new Canon T5I camera. I imported it to IMovie and edited it! When I uploaded it I chose HD but when it was officially on YouTube it wasn't in HD anymore. I tried going to Preferences and selecting "Full-Original..." But now it won't let me select HD when I go to "Share" > "Media Browser"

    Usually, this is caused by not using the right login id and password for YouTube. For most people, this would be the same as your GMail email address and password. It is not you YouTube user name.

  • Audio only on first few seconds

    I have a problem with the audio on PE9. I use the Organizer to import the files from my hd. The files play perfectly with Quick Time and VLC. When I play the file in PE9 I notice that only the first 5 to 10 seconds of sound show in the timeline. The rest of the file has no sound and there is a flat line in the audio channel. The camera is a Pentax compact that uses .mov file format. In VLC the audio codec is shown as PCM U 8. My question is why do I only get a few seconds of sound? Is there a way to get the sound for the whole file? I am using win 7 64 bit. I'd appreciate any help or ideas.

    Hm-m,
    That is rather an odd Audio Sample Rate & Bit-Rate. Normally, one sees 24KHz, 32KHz, 44.1KHz or 48KHz, at 8-bit, 12-bit or 16-bit. The 32-bit floating point is the Conformed Audio, for precise editing, and is to be expected, however the 8KHz Sample Rate is not what I would expect for the Project. Normally, that is Conformed to 48KHz, which is the standard for DVD Audio.
    When you look at the Audio Track where the problem Clip is located, and expand that Audio Track vertically (if you hover the Cursor at the juncture of the Audio Track in the Track Header, you will see the Cursor to change shape to a little = sign with arrowheads - click+drag), does the Waveform Display stop where the Audio ceases to play? If so, this sounds like the CFA & PEK files were truncated. This usually happens when the Conforming process has been interrupted.
    One test that you can run is to close out of PrE, and navigate to your Media Cache folder in the Scratch Disks' location, and find the CFA and PEK files for one of the problem Audio files. They will have the same name as your Clip, but will be CFA and PEK. Those are the Conformed Audio file and the Waveform Display for the Audio in that Clip. Choose one pair for a problem Clip and Delete those two files - the CFA and the PEK. When you relaunch PrE and Open that Project, PrE will reconstruct the CFA and PEK for that Clip. Make sure to let the Conforming complete 100%, before touching the computer. There is a little progress bar at the lower-right of the GUI. Do not do anything, until it disappears. Test.
    Good luck,
    Hunt

  • Why can I only download 1.7 meg from sites

    why can I only download 1.7 meg from sites

    Are you trying to download YouTube videos with a Firefox extension?
    YouTube (Google) seems to have made changes to their servers and that prevents the extensions from working for now.<br />
    You will have to wait until the extension developer has released an update to fix this or check for a possible beta version.
    *http://www.downloadhelper.net/install-beta.php?version=4.9.10b2

  • Itunes only imports a few seconds of each song

    Hi ... i'm really struggling with this problem!
    whenever i import a song from a CD, itunes only imports a few seconds of each song and moves onto the next .. so on & so forth. It only take a few second to completely import the entire CD.
    However the 'imported' songs don't play ... itunes just whizzes thru all the songs in 2 sec. the time duration for each song is '789:57:13'.
    this has occurred a few times in the past but seems to be fixed by a restarting my mac or reloading itunes from the .dmg file. which can be very annoying to say the least!
    I need a more long term solution! any assistance is greatly appreciated!
    Cheers

    I'm importing from 'factory' CDs .... i've deleted Itunes and reloaded it again and it seems to be ok, but from experience its not gonna last ...... the last time i had to shut down and restart 4 times to get it to work!
    Frustrating ....... not to say the least!
    Help!

Maybe you are looking for