Why am I prompted for login, only when booting up?

Hi,
I've set a login for my MBP, but have noticed that I'm not prompted to login when restarting.  Only when returning from sleep or booting up fresh.
I've reviewed the Security settings but everything "seems" correct.  I'm supposed to be prompted when returning from sleep and after the screen saver is activated.
Not sure what else to check to insure this after a restart.
Thanks for any help.

This is actually an Account setting... not a security setting.  Open System Preferences and then Accounts.  On the bottom left, select Login Options.  Automatic Login is probably checked (it usually is by default).  Just unselect it.  If it is grayed out, you'll need to click the little lock on the bottom of the window to unlock the preference.

Similar Messages

  • Why being prompted for login/password when using OVDC, smart card,token/vdi

    Hello,
    I'm using VDI 3.2.1, OVDC, smart card and i assigned a smart card token to a desktop pool.
    Inserting the smart card triggers a new VDI desktop selector which prompts for the login and password.
    Is there any reason why VDI is prompting for the login/password in the VDI selector when using a smart card especially that the smart card token has been assigned to a desktop pool ?
    Thanks
    Thierry.

    You still have to authenticate to get a desktop. If you assigned a token to a pool, the ability to be assigned a desktop is based on the token not the user ID. That means that any user will be assigned a desktop if they use that card.

  • Crystal report on VB 6 prompting for Login even when logged on to SQL Server.

    Hi,
    I am migrating crystal report 8.5 to 11 in VB 6. I have used the following code.
    Components Used: Crystal ActiveX Report Viewer Library 11.0
    References Used: Crystal ActiveX Report Viewer Library 11.0 & Crystal Reports ActiveX Designer Design and Runtime Library 11.5
    Dim app As New CRAXDDRT.Application
    Dim rpt As New CRAXDDRT.Report
    Set rpt = app.OpenReport("C:\creditrisk.rpt")
    rpt.ParameterFields(1).AddCurrentValue (Now)
    rpt.ParameterFields(2).AddCurrentValue (Now)
    CrystalActiveXReportViewer1.ReportSource = rpt
    rpt.Database.LogOnServer "p2sodbc.dll", "AURORA_DB", "DATABASEMAIN", "userId", "xxxxxxxx"
    CrystalActiveXReportViewer1.EnableInteractiveParameterPrompting = False
    Me.Left = 0
    Me.Top = 0
    Me.Height = Screen.Height
    Me.Width = Screen.Width
    Me.WindowState = vbMaximized
    CrystalActiveXReportViewer1.ViewReport
    I am using the existing reports that has been designed to use ODBC connection DSN Name AURORA_DB. Even though i supply the logon credentials crystal reports still prompts the logon dialog box.
    Any help will be highly appreciated.

    Issue is you are using the old DB driver p2sodbc.dll, change this to crdb_odbc.dll and it should work for you.
    Also check the samples for new Database connection info and methods.

  • Trying to subscribe to a secure podcast, but I am never prompted for login information, instead I just get the gray "i". Is there something in iTunes 10.4 i can change to fix this?

    Trying to subscribe to a secure podcast, but I am never prompted for login information, instead I just get the gray "i". Is there something in iTunes 10.4 i can change to fix this?
    Notes: The RSS feed of the podcast works just fine. When I enter the podcast URL into the firefox bar, I am prompted and am able to access the page. The problem is with iTunes not giving me the prompt.

    Mountain Lion Supported Machines
    Supported
    Models
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    Xserve (Early 2009)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Requirements
    General Requirements
    OS X v10.6.8 or later
    2GB of memory
    8GB of available space
    Some features require an Apple ID; terms apply.
    Some features require a compatible Internet service provider; fees may apply.

  • Why does the album artwork appear only when the first song is playing only?

    Why does the album artwork appear only when the first song is playing only?

    Hello ckuan. Thx for your reply.
    The songs are not from iTunes, they are from CDs that I had copied to my itunes library.
    It is worth mentioning that I wasn't facing this issue before IOS 5.

  • My iPhones email app is not checking automatically for emails, only when I open it.. How to fix?

    My iPhones email app is not checking automatically for emails, only when I open it.. How to fix?

    Settings > Mail, Contacts, Calendars > Fetch New Data > On
    then scroll down to bottom of that page to check whether you want to fetch email:
    every 15 minutes
    every 30 minutes
    hourly
    manually

  • Report server running in integrated mode , but cannot deploy reports again and again prompts for login

    Report server running in integrated mode , but cannot deploy reports again and again prompts for login
    Nur Mondal

    Hello,
    How are you deploying the reports? Via Visual Studio, Report builder or manually uploading RDL files?
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Why am I prompted for my serial number even if i dowloaded the apps using creative cloud?

    Why am I prompted for my serial number even if i dowloaded the apps using creative cloud?

    These are user to user forums.  Most of us are paying customers.  If you have a problem deactivating your software, you need to contact Adobe Support directly.  They can most likely resolve the deactivation for you, and might be able to assist further in resolving your problem.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • HT4009 why is it asking for credit details when its a free app

    why is it asking for credit details when its a free app

    It is part of the verification process.

  • Does anyone know how to reset the Keychain login access when booting from disc?

    I recently had Lion go bad on my Mac Pro (screen hung up with twirly grey circle). I tried unsuccessfully to repair permissions etc, so I decided to install Snow Leopard onto my other internal drive as this was the latest system I had on a disc; bootup with that and update to Lion.
    After installation the machine restarted and asked me for the login user and password. I thought this was odd as usually it would ask to set this up when you first bootup; I can't get past the login. My question is how do I reset the keychain login access when booted  m a disc or is there a default I can use?
    Regards

    I re-installed in  the end and the usual load in screen came – all sorted...

  • What triggers the prompt for memory test during boot up of WLC.

    I have a controller that sometimes does and sometimes doesn't prompt for memory test at boot up. What triggers the prompt for memory test at boot up?

    We have the same behaviour with a 4402 controller.
    After a software upgrade from 4.2.130.0 to 4.2.176.0 the controller didn't reboot automaticly during the first restart with the new software. I connected via console and saw this message:
    Airespace 4200 Wireless LAN Switch Board - Memory Test
    Invalid Option...Press any key to continue
    Airespace 4200 Wireless LAN Switch Board - Memory Test
    1. Restricted [4kB per MB]
    2. Entire Range [512M]
    3. EXIT
    Then I choosed option <3 Exit> and the controller started correct.
    Regards
    Hendrik

  • Since upgrading to iOS 6 I am not getting prompted for my password when I update apps. Why is this?

    When I updated apps on my ipad2 and iphone4S I used to get prompted for my password within a certain time.  So I could update a couple and then 10 minutes later if I wanted to download or update something else I would need to put in my password again. Since I upgraded to iOS6, I don't believe I am prompted for my password the same amount of times. I updated an app this am after not using iPad through the night and it just updated, no password required. This has me concerned now because sometimes I bump buttons by accident and now I will be charged for these accidents. What has happened to Apple's brilliant security?

    They've changed it in iOS and updates (and updates ONLY) do not require a password since it is really unnecessary as they have it on record that you were the one who bought the app. Why is more security needed, you aren't going to be charged for anything?
    Next time you update and app go to the App Store and try to buy something. You will be asked for your password.

  • Why am I prompted for a serial number when trying to open an acrobat PDF?

    I am being prompted for a serial number when I try to open a pdf. I just downloaded creative cloud, started with After Effects. I haven't downloaded any other apps. I made a pdf from an InDesign doc. This wasn't happening yesterday. After making the PDF, I am being prompted for a serial number. What serial number and why to open a pdf?

    >just downloaded creative cloud, started with After Effects. I haven't downloaded any other apps
    What program are you using to try and open the PDF?
    Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link

  • Crystal Report prompts for username / pwd when deployed to Bus Obj Server

    Hi All,
    I'm relatively new to Crystal Reports development.  My day job is test analyst.  I'm reasonably technically proficient.
    PROBLEM
    I have created a number of Crytsal Reports which have now been deployed to an Enterprise Business Objects Report Server.  The Server is Business Objects Server XI release 2.
    When I run the report in Crystal Reports Desiger 2008 it does not prompt me to enter the database credentials except if I have modified the SQL command or some other report detail.  Most times I run the report, no database username / pwd is required because I already set this up in the datasource config.
    I' connecting to an Oracle database using ODBC (RDO) connection type.  I cannot get the ODBC (RDO) connection type working from my PC using Crystal Reports Designer 2008, because I don't have ODBC configured for my datasource.  Instead, Im using the native Oracle Server driver to connect to my datasource.
    An existing user in the client organisation configured my report to use the ODBC (RDO) conneciton type for me because the Business Objects Server in the client organisation does not (currently) support the native Oracle driver.  Other reports this user has created and deployed using the ODBC conenction type run successfully without prompting user to enter the database connection credentials.
    NOTE:
    This report users an SQL Command (new to Crystal 2008 I beleive?).  The command is reqiured for this report due to the complexity of the underlying SQL query.
    Does anybody know why the report keeps prompting me to enter the database credentials at runtime?  Obviously for security reasons I don't want report users to have to enter the database schema name and password in order to run the report.

    Hi,
    You need to uncheck "Propmt the user for database logon when viewing". You will find this when you deploy the report on the BOE XI R2.
    The deployment step main heading is
    Specify Databse Crendentials.
    Hope this helps,
    Thanks
    -Azhar

  • Outlook Anywhere Prompts for Credentials only for Outlook 2010, not Outlook 2013

    I'm having a heck of a time with this one.  We have Exchange 2010 on premise, with our filtering through EOP.  Clients that are using Outlook 2010 Professional Plus are continuously getting prompted for credentials when off network and relying
    on Outlook Anywhere.
    I've read many threads about configuring credential manager appropriately for the internal domain and our external domain.  I can get them to authenticate just fine, and email flows, but they continue to be prompted everytime they connect again.
    Here is the kicker:  When I install Outlook 2013 on the same computer, outlook anywhere functions just fine, no problems, no authentication prompt.
    Like I said I have read a plethera of articles and threads about this, I have gone through all settings on Exchange, our edge server, our firewall, our certificate.  The MSSTD string matches our "Issued To" string.  NTLM authentication
    is configured on both the client and the server.  Appropriate settings are configured on the firewalls. 
    Anyone know why Outlook 2010 would have this problem, but not Outlook 2013 on the same computer, same user, same mailbox database?  
    Thanks in advance!!!

    I'd still Echo Ed's original question.
    Do you have Outlook 2010 patched up?  At this time you need to be on SP1, and SP2 by October the 14th.
    Also I expect you to have a recent update ontop of that as well.
    http://blogs.technet.com/b/rmilne/archive/2014/04/14/office-2010-sp2_1320_-do-you-need-to-upgrade_3f00_.aspx
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Maybe you are looking for