Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
Can't wait to see what happens tomorrow.

Similar Messages

"Unfortunately, Messaging has stopped" error keeps popping up and text messages are not being received on Droid Maxx I got less than 2 weeks ago.

I upgraded to a Droid Maxx about 2 weeks ago and all seemed well. Last Friday, I started receiving an "Unfortunately, Messaging has stopped" error message randomly--sometimes when I was writing a text, sometimes when I would open other apps, there was no rhyme or reason to when it would occur. Now it also appears that I am not receiving some of my texts. I called Verizon Support who told me that they are experiencing this problem on several devices and that she was going to forward me to someone for help. 20 minutes later, no one had picked up and I had to leave. So I thought I would try here to see if Verizon has come up with a fix for this, if I should get another phone, or if they are working on a software update or something. Help, I really liked this phone until now!

Hello,
I am using the messaging app that was preloaded with the phone, the green face icon. I do not have an "Android Keyboard" app, but I have cleared the cache on the "Messaging" app, several times. I have also gone to the Verizon store where an associate did a soft reboot, telling me that would work. A very short time later, the error message started appearing again--so this did not work either.
The error message comes very sporadically. Sometimes several in a few minutes, other times not for hours.

Unfortunately, Bluetooth has stopped working message

Hello, Two weeks ago I bought a pair of wireless headphones to use with my Samsung Galaxy S5. Up until Saturday night everything worked fine. On Saturday night I received a message stating ‘Unfortunately, Bluetooth has stopped’ this message appears every couple of minutes and I can only stop the message from appearing by turning the Bluetooth off. I have tried clearing the Bluetooth cache and restarting the phone but the message continues to come up. Does anyone have any suggestions?

RDH8 wrote:
Interested in how this turns out. My Bluetooth started playing up on Saturday as well, so very odd they all started failing around the same time. If I was to take a stab in the dark I'd say it's a glitch with the OS that Samsung/Telstra need to get on top of ASAP.
So far, so good. Bluetooth is working correctly with two of my devices, namely my car's head unit and my Pebble watch. As a side note, Samsung's Smart Switch leaves a lot to be desired as a backup and restore application. All up, I think it took me about 4 or 5 hours to reinstall and resync all my data - maps, podcasts, ref material. I trust that the reset has solved the problem once and for all, but reading some other forums I note the outcome is good for a limited time before it needs doing again. Other forums also suggest it's a known issue with Samsung/Lollipop that requires addressing. I thought an earlier poster was on to something when I saw the last update date of the Telstra app was 29/7, but that's probably coincidence. I think I average about 4 or 5 app updates on any given day, making it hard to pin down to any one app. Needless to say, I shall be monitoring the situation more closely for a while.

After upgrading, I am getting the dreaded "iTunes has stopped working" message. I've followed all of the troubleshooting tips on the forum without success. Fortunately, it works on my other computers. Running Win7 pro.

After upgrading iTunes, I'm getting the dreaded "iTunes has stopped working" message after launch. I've tried the troubleshooting tips on the Forum without success (though most are pretty old...). Fortunately, iTunes works on my other computers, but I have iPad backups on this one that I'd like to keep. Anybody else with this issue??

My inclination is that it is something in the projects or in the manuals being linked that is the culprit because that is where the consistency lies - projects were created identically and manuals all follow identical formats. The problem typically only occurs after the project has been successfully created and the manual is subsequently updated and I am syncing the manual in RH so I can generate a new AIR file. This is the first time the project has consistently corrupted every time I try to generate the Word document after linking it in RH. This makes little sense to me since it generated fine a couple weeks ago and I did nothing special when I updated it in Word yet when I tried to update it in RH, that is when it originally corrupted. The bottom line is that I cannot 100% trust that any project I run will work the next time. I end up just crossing my fingers and hoping for the best.
My problems seemed to start once I went to RH9 (from RH8) because we had upgraded from MS Office 2003 to the 2010 version and I needed 9 for the docx extension. Like I said, it is not all the time - I can be beating my head against the wall getting one of the projects to work, then create 3 more projects that have no problems and then the next one leaves me wanting to throw my PC through a window....
Deleting the CPD does not corrupt the project, it just removes my default linked document that allows me to circumvent linking the styles individually for that project. Once I have a manual linked and I remove the CPD, it just creates a new one. What I am saying is that if I delete the CPD file, it does not prevent the project from corrupting nor does it make the corrupted project viable again.
thanks!
Kathi

HT5557 Why do I get a Message "Unable to Open Book" and how do I fix it?

Why do I get a Message "Unable to Open Book" and how do I fix it?

This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.
Do a clean reinstall and be sure to remove the Firefox program folder to remove the file(s) that cause the problem.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
See:
* [/questions/826858]

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this

A prompt that says "Could not use the clone stamp because the are to clone has not been defined (option-click to define a source point), appears EVERY time I try to use the clone stamp. What is wrong and how can I fix this?

If a tool is acting up, one suggestion is to reset the tool.
Ctrl-click on the clone tool icon in the Options bar and select Reset Tool.

Whenever I try and sync my iphone 5 to my itunes on my laptop it comes up with' an unknown error occured (0xE8000084)' has anyone had this and how did you fix it?

Whenever I try and sync my iphone 5 to my itunes on my laptop it comes up with' an unknown error occured (0xE8000084)' has anyone had this and how did you fix it?

What was the full wording of the error message? Usually there is also a number or additional information.
Try placing the iPod in Recovery Mode and then restore
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

My iPhone 5 suddenly stopped opening the Apple Mail app. It had worked flawlessly for years, but just stopped. It worked on my iPad, and of course on the computer. What's going on, and how do I fix it? I've turned the phone on and off several tim

My iPhone 5 suddenly stopped opening the Apple Mail app. It had worked flawlessly for years, but just stopped. It worked on my iPad, and of course on the computer. What's going on, and how do I fix it? I've turned the phone on and off several times, soft reset several times. There was no change in any settings when this happened, nor any new apps were added. Thank you for any help you can give.

Does it not work either way? Sending and receiving? Did you check the settings and make sure that nothing has changed? If you can receive email, but not send it, check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

TS3694 why is there an error 9006 and how can i fix it?? please answer for ipad mini

why is there an error 9006 and how can i fix it?? please answer and btw its an ipad mini

if you are trying to download and install ios7, it is probably because of the enormous amount of traffic apple's download servers must be experiencing. things should return to normal before too long, just hang tight

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

I have a Nikon D600 and D800 and I shoot everything in Raw. I use Photoshop Elements 9 for processing but I have been unable to convert any RAW files to open in PSE. Says unable to parse the file. What does this mean and how do I fix it?

Since pse 9 can only use up to camera raw 6.5 and the d600 needs at least 7.3 and the d800 needs at least 6.7, you can use the
8.6 adobe dng converter to convert those files to dng copies, which then pse 9 should open.
8.6 dng converter
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Note:
If you have windows xp or vista or mac os x 10.6, then you'll need to use the 8.3 dng converter instead
windows
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.3
mac
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.3
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube
more info on supported cameras and camera raw plugins required
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

HT1436 My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

Great clue Lukas...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

When I try to send photos in email, it fails saying "rejected by the server." What does that mean and how do I fix it?

When I try to send photos or anymail, it fails saying...."rejected by the server."
What does that mean and how do I fix it?

Please see this article on setting up an email account using the shaw mail server.
https://community.shaw.ca/docs/DOC-2181
Good luck Friend.

HT1414 Why do I get 'This message has no content' with some e-mails on my iPad when the same messages can be received on my MacBook Pro without any problem, and how can I fix it?

Why do I get - 'This message has no content' - with some e-mails on my iPad when the same messages can be received on my Mac Book Pro without any problem and how can I fix it?

Is this a POP (POP3) email account? If so, you MacBook Pro may be retrieving the email and deleting it off the server before your phone can. Another possibility is that both your Mac and your phone are trying to retrieving it at the same time, and the POP server, which will only allow a single email client connection at a time, is locking out your phone resulting in the "has not been downloaded from the server" error.

'unfortunately messaging has stopped' error

Hi all, I have bought an Xperia Z3 compact phone few days ago. And since yesterday, I get the message 'unfortunately, messaging has stopped' as soon as I try to open the messaging app. It is really annoying, as this is a basic function of a phone. I have tried restarting, force closing the app, updating with sony udpates, and clearing all data. Any ideas how to repair this?

well, It seems my problem has been solved miraculously! Here is what I did: Following some suggestion on another forum to use another app for messaging, I installed the 'GO SMS PRO' to use instead of the default messaging. The new app asked me if I wanted to have it as default instead of the 'messaging' app, and I said yes. Then by mistake I clicked again on the messaging app icon on my phone, the messaging also asked me if I wanted to use messaging app instead of the GO SMS PRO to read my messages and I said yes. AND BINGO all of a sudden the 'Messaging' app is working again! I guess moving to the new default app has changed some thing that was giving the error. Anyways, I thought to share it with you, in case someone else has the same problem

HT201210 I'm trying to restore an IPhone 4 but keep getting an unknown error 27 message. What is this and how do I fix it?

My cousin asked me to help with his IPhone 4. It will not do anything except show the Apple logo. I have tried to do a restore on it but keep getting the message "Unknow error occurred. (27)". What is this and how do I fix it?

iOS: Unable to update or restore

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

Similar Messages

Maybe you are looking for