Why am i seeing athe itunes logo and a usb cable on my ipad screen
why am i seeing the itunes logo and a usb cable on my ipad 2 screen
It means that you need to connect the iPad to your computer's iTunes (recovery mode), and you should then be able to reset the iPad and restore/resync your content to it
Similar Messages
-
My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?
Here are Apple Steps: http://support.apple.com/kb/HT1808
-
My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back
I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!
-
When i plug in my iPhone to itunes so i could restore because i found it, itunes gives me error code 2009. on my iPhone, all that is displayed on the screen is the itunes logo and a usb cable saying to connect it to itunes. Help please?
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. -
I awoke this morning to find my iPhone 3g in recovery mode. I tried rebooting, charging, and when I connected to iTunes it gave me a message saying I had to finish recovery first. My screen shows the iTunes logo and the USB cable. Any ideas?
http://support.apple.com/kb/HT1808
-
i was updating my iphone 3gs software on my pc and it came up with an error and since then i have just had the itunes symbol and a usb cable on my screen. i cant do anything with it what can i do?
The only thing you can do is what the picture is telling you to do: plug it into iTunes and restore it.
-
MY IPAD IS STUCK FOR ALMOST ONE DAY.. LAST NIGHT I TRIED TO INSTALL THE LATEST IS UPDATE WHICH IS IOS 6.1 BUT THEN MY IPAD2 TURNED OFF AND THE ITUNES LOGO AND USB CABLE CAME OUT ON THE SCREEN SO I TRIED TO CONNECT IT TO MY ITUNES ON MY COMPUTER AND IT SAYS RECOVERY MODE SO I CLICKED OK BUT THEN IT ALWAYS END UP CORRUPTED... AND IM CONNECTED TO MY INTERNET 24/7...I JUST DONT KNOW WHAT TO DO...I HOPE APPLEWILL FIX THIS AS OSOON AS POSSIBLE...SO DISAPPOINTED!! PLEASE HELP ANYONE... BEEN TRYING TO RECOVERY MODE OVER 150 TIMES...
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
my iphone has a itunes logo and usb cable picture on the screen....what can I do to get it to work
What happens when you plug your phone into itunes
-
How ro reset Iphone 3 after break of update; see onyl on display the Itunes logo and the USB cable;
updatre to higher OS wa sinterrupted since then my Iphone 3 deos not connect to Itunes anymore.; Question is now hjow to reset /start the Iphone.
Cheers MichaelTry to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414 -
My ipad 2 was being updated to ios 6.1.3 and when it rebooted it went to recovery mode. I want my ipad 2 back with or without my files.Please help
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Help - while upgrading os all i see is itunes logo and usb cable on screen having tried rebooting
help, while ugrading os all i see is itunes logo and white usb cable. I have tried rebooting and reloading itunes.
See Here...
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097
Ipad User Guide -
I have just tried to update my ipod touch and the update failed but it has locked my ipod. All I get is a picture of the itunes logo and the usb lead. I am unable to get the ipod to move and I don't know what to do. I think I should be recompenced by Apple if I have to pay to get it fixed!
The logo is saying connect it to your computer with iTunes installed on the computer. I assume when yo do this that the iPod is not seen in iTunes. to make iTunes appear try:
- Resetting the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Place the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Place the iPod in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If the iPod appears in iTunes restore the iPOd. If not I would make an appointment at the Genius Bar of an Apple store. -
I updated my ipad 2 today with ios 702 and now my ipad has crashed only showing a itunes logo and a charging cable pidtogram on a black screen, wont turn on. Any help appreciated?
iPad is in Recovery mode.
Hold the Power button and Home button at the same time, keep holding, when you see the white apple logo appear and then let both go. Let it start. -
i just bought my ipad 2 and tried to on it all i could see is an iTurn logo and a USB cable on the screen. i can't get to the home page what should i do?
The first thing that needs to be done with a new iPad is to activate it by connecting it to a computer that is running iTunes. Getting started guide : http://support.apple.com/kb/HT4053
The iPad manual also has a chapter on getting started - it can be downloaded from here : http://support.apple.com/manuals/ipad -
My ipod is displaying the itunes logo and a usb cord. I've tried resetting it but it didn't work. Any suggestions?
Your in DFU mood do this:
iOS: Unable to update or restore
Follow these steps to perform a recovery-mode restore on your iPhone, iPad, or iPod touch
You may need to perform a recovery-mode restore if you experience any of the following situations on your iPhone, iPad, or iPod touch. The device:
Displays the Apple logo with no progress bar or a stopped progress bar for over ten minutes.
Restarts but never displays the Home screen.
Is no longer recognized in iTunes after an update or restore did not complete.
Automatically goes into recovery mode after having an issue while installing an update or performing a regular restore.
How to perform a recovery-mode restore
If your iPhone, iPad, or iPod touch is already showing the "Connect to iTunes" screen, please go to step 5.
Connect your USB cable to your computer but not to the iPhone, iPad, or iPod touch until step 3.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button down, connect the USB cable to the iPhone, iPad, or iPod touch. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen. When this screen appears, you can release the Home button:
Note: If the image of a battery appears, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again. If you don't see the Connect to iTunes screen, try these steps 1 through 4 again.
iTunes should automatically open and display the following message:
"iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."Note: If iTunes not open after two minutes, please open iTunes yourself.
Use iTunes to restore the device.
If you see the Connect to iTunes screen but the device does not appear in iTunes, follow these troubleshooting steps if you're using a Mac, or these steps for Windows computers.
Additional Information
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup.
Maybe you are looking for
-
ALV report editable to enter text and print with including the text?
Hi all, I have to display output of a report in ALV format and i have to make two fileds can be editable to enter texts by user and able to print the list with that texts . Is it possible using standard Function modules or I have to go for OO metho
-
I have a macbook pro and and imac. They are under 18 months old and are both intel. I remember reading somewhere a while ago that there is a firmware update for my built in wireless to upgrade to "N" Where is that? and is it free because I purchased
-
Zen microphoto : firmware erased, not connected now
I decided to flash new firmware to my microphoto. This was the biggest mistake. I have entered into recovery menu.Select load firmware and bang ! It erased it immediately, no confirmation no choice..Just erased it without asking. This is awful ! So,
-
hello our company want to blocked FI postiong to some vendor. so only logistics transaction will be post to those vendors. is there sap standart option for this. i will give points for answer thanks meir
-
Hi All, I have created one Z* output type and attached it with Z* program. and it is having routine called ENTRY_N. Now when i execute a transaction which will trigger my output type, is giving me error saying "Processing routine ENTRY_N in program Z