Why am i still profiled to 1mb
Hi there
i have posted before regarding my profile. I have had the third engineer come out today who tested everything and wen to the cabinet and exchange. he says there are no errors and everything is as good as can be. However i am still profiled to 1mb.
This is unnaceptable i have been connected for 4 days now and no change why am i paying for something when i am only getting half the service
Please find stats below.
Line state:
Connected
Connection time:
4 days, 07:09:46
Downstream:
2.375 Mbps
Upstream:
448 Kbps
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
9.1 dB / 19.0 dB
Line attenuation (Down/Up):
55.4 dB / 31.5 dB
Output power (Down/Up):
17.9 dBm / 11.8 dBm
FEC Events (Down/Up):
35216 / 0
CRC Events (Down/Up):
2484 / 5
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
1349 / 5
Error Seconds (Local/Remote):
549 / 3
And BT Speedtester
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
844 Kbps
0 Kbps
1000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 844 Kbps
For your connection, the acceptable range of speeds is 200-1000 Kbps.
Additional Information:
Your DSL Connection Rate :2432 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 1000 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
Your test has completed please close this window to exit the performance tester.
Any intervention by an engineer on your line will cause the restart of the time scale. For your IP profile to reset all you can do is be patient and wait while the 5 day period starts again make sure during this period NO restarts of your hub occur there is no other action you can take until that time scale has completed. If your profile has not reset after that time, I would suggest contacting the board mods and asking them to get your profile reset
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’
Similar Messages
-
Hello,
I have just moved to mac and pointed my screen saver to my pictures folder and all the pictures are 1mb in size with a lowest resolution 4416 × 3312. Why do I still get blury images in my shifting titles screen saver?
Regards,
Janfinally found it
http://lifehacker.com/5711409/how-to-search-for-hidden-packaged-and-system-files -in-os-x
need app find any file
link at bottam -
hi, i deleted a contact in my iphone but when i go to write a text to someone there name pops up in the message bar. but when i go to contacts its not there. why is it still in my phone even tho i deleted it?
hi JBeck022,
You may have some messages with that number in the messages section if you do, please delete them.
Another option is, you restored your iPhone with a backup that still had the contact info of that person -
I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?
I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update. -
why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?
Click here and follow the instructions.
(71175) -
Why do I still get class or interface expected error????
I made sure I closed all the bracket, why do i still get the error.
Please help
* ShopCartServletHW3.java
* Created on November 19, 2007, 5:42 PM
package ITI;
import java.io.*;
import java.net.*;
import java.lang.*;
import java.util.*;
import java.text.*;
import javax.servlet.*;
import javax.servlet.http.*;
* @author Administrator
* @version
public class ShopCartServletHW3 extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
private String pageTop01;
private String pageTop02;
private String pageTop03;
private String pageTop04;
private String pageTable01Top;
private String pageTable01Bottom;
private String pageBottom;
private String pageItemEmpty;
private String confirmTable01Bottom;
private String confirmTableTop;
private String confirmItemEmpty;
private Hashtable pageItemList = new Hashtable();
private Hashtable confirmItemList = new Hashtable();
private double runningTotal;
private ShopCartDataHW3 cartData;
private InvTrackerHW3 invTracker;
private Hashtable pastOrders;
public void init() throws ServletException {
PageTop01 = "<html>"
+ "<head>"
+ "<title>Blue Ridge Supply Shopping Cart </title>"
+ "</head>"
+ "<style type=\"text/css\">"
+ "body {font-family: arial}"
+ "h1 {color: navy}"
+ "h2 {color: navy}"
+ "h3 {color: white}"
+ "h4 {color: white"
+ "h5 {color: white}"
+ "h6 {color: navy}"
+ "p {color: navy}"
+ "</style>"
+ "<body>";
pageTop02 = "<table border=\"0\" width=\"100%\" cellpadding=\"0\">"
+ "<tr><td width=\"25%\" valign=\"top\">"
+ "Shopper: ";
pageTop03 = "<br>"
+ "<a href=\"RegLoginServletHW3\"> [Log Out]</a>"
+ " "
+ "<a href=\"CatServletHW3\">[Continue Shopping]</a></td>"
+ "<td width=\"50%\" valign=\"bottom\" align=\"center\"><h1>"
+ "Blue Ridge Supply - Shopping Cart"
+ "</h1>"
+ "<td width=\"25%\" valign=\"top\" align=\"right\">"
+ "Shopping Cart contains ";
pageTop04 = " items </em> "
+ "</td></tr></table><hr>";
pageTable01Top = "<center><h3>"
+ "Please review sections:"
+ "</h3><table border=\"1\" cellpadding=\"10\" align=\"center\" valign=\"middle\" bgcolor=\"navy\">"
+ "<tr><th><h4><br>"
+ "Quantity"
+ "</h4></th<th><h4>"
+ "Item"
+ "</h4></th><th><h4>"
+ "Unit Price"
+ "</h4></th></th><h4>"
+ "Total Price"
+ "</h4></th></tr>";
pageBottom = "</body></html>";
protected void processRequest(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
HttpSession session = request.getSession();
if (session.isNew() || session == null) {
sessionError( request, response);
String userID;
if (session.getAttribute("userID") != null) {
userID = (String)session.getAttribute("userID");
} else {
sessionError( request, response);
userID = "";
Integer cartCount;
if (session.getAttribute("cartCount") != null)
cartCount = (Integer)session.getAttribute("cartCount");
} else {
sessionError( request, response);
cartCount = Integer.valueOf(0);
if (session.getAttribute("pastOrders") != null)
pastOrders = (Hashtable)
session.getAttribute("pastOrders");
} else {
sessionError( request, response);
pastOrders = new Hashtable();
if (session.getAttribute("invTracker") != null)
invTracker = (InvTrackerHW3)
session.getAttribute("invTracker");
String shiptoname;
String streetaddress;
String city;
String state;
String zip;
String shipservice;
String cctype;
String ccname;
String ccnum;
String ccexpmonth;
String ccexpyear;
// Shipping information
Hashtable shipHash;
if ((session.getAttribute("shipping") != null))
shipHash = ((Hashtable)session.getAttribute("shipping"));
} else {
shipHash = new Hashtable();
String [] shipping = new String[5];
if (shipHash.get(userID) != null) {
shipping = (String[])shipHash.get(userID);
shiptoname = shipping[0];
streetaddress = shipping[1];
city = shipping[2];
state = shipping[3];
zip = shipping[4];
} else {
shiptoname = "";
streetaddress = "";
city = "";
state = "";
zip = "";
if ((session.getAttribute("shiptoname") != null)) {
shiptoname = filter((String) session.getAttribute("shiptoname"))
// Credit information
if ((session.getAttribute("shipservice") != null)) {
shipservice = filter((String) session.getAttribute("shipservice"));
} else {
shipservice = "";
if ((session.getAttribute("ccname") != null)) {
ccname = filter((String) session.getAttribute("ccname"));
} else {
ccname = "";
if ((session.getAttribute("cctype") != null)) {
cctype = filter((String) session.getAttribute("cctype"));
} else {
cctype = "";
if ((session.getAttribute("ccnum") != null)) {
ccnum = filter((String)session.getAttribute("ccnum"));
} else {
ccnum = "";
if ((session.getAttribute("ccexpmonth") != null)) {
ccexpmonth = filter((String) session.getAttribute("ccexpmonth"));
} else {
ccexpmonth = "";
if ((session.getAttribute("ccexpyear") != null)) {
ccexpyear = filter((String) session.getAttribute("ccexpyear"));
} else {
ccexpyear = "";
if (session.getAttribute("cart") != null && session.getAttribute("cartKeys") != null)
cartData = new ShopCartDataHW3((Hashtable) session.getAttribute("cart"), (Hashtable)
session.getAttribute("cartKeys"));
else {
cartData = new ShopCartDataHW3(new Hashtable(), new Hashtable());
String itemToAdd;
itemToAdd = (findItemAttribute(request, response));
if ((itemToAdd != null) && (cartData.getItemID(itemToAdd) == null)) {
cartData.updateItemID(itemToAdd, 1);
if (itemToAdd != null) {
int defaultValue = (cartData.getQty(itemToAdd).intValue());
int x = getIntParameter(request, itemToAdd, defaultValue);
if (x < 0) {
// do nothing
} else {
cartData.updateItemID(itemToAdd, x);
Hashtable cart = new Hashtable(cartData.getCart());
Hashtable cartKeys = new Hashtable (cartData.getCartKeys());
session.setAttribute("cart", cart);
session.setAttribute("cartKeys", cartKeys);
Integer numberOfKeys = new Integer (cartKeys.size());
session.setAttribute("cartCount", numberOfKeys);
runningTotal = 0;
Enumeration keyValues = cartKeys.elements();
while(keyValues.hasMoreElements()) {
String key = (String) keyValues.nextElement();
if (key != null) {
setCartPage(key, cartData);
setConfirmItemList(key, cartData);
if (numberOfKeys.intValue() == 0) {
setCartPage(null, cartData);
String shippingAndCredit = loadShippingAndCredit(shiptoname, streetaddress, city, state, zip, shipservice, cctype, ccname, ccnum, ccexpmonth, ccexpyear);
if (numberOfKeys.intValue() == 0) {
session.setAttribute("confirm", "");
} else {
setConfirm(session, cartKeys, numberOfKeys);
showPage(request, response, userID, cartKeys, numberOfKeys, shippingAndCredit);
private void showPage(HttpServletRequest request,
HttpServletResponse response, String userId, Hashtable cartKeys, Integer numberOfKeys, String shippingAndCredit)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
out.println(pageTop01 + pageTop02 + userID + pageTop03 + numberOfKeys + pageTop04);
out.println(shippingAndCredit);
out.println(pageTable01Top);
Enumeration keyValues = cartKeys.elements();
while(keyValues.hasMoreElements()) {
String key = (String)keyValues.nextElement();
if (key != null) {
out.println(pageItemList.get(key));
if (numberOfKeys.intValue() == 0) {
out.println(pageItemEmpty);
out.println(pageTable01Bottom + pageBottom);
out.close();
private String findItemAttribute(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
Enumeration paramNames = request.getParameterNames();
while(paramNames.hasMoreElements()) {
String paramName = (String) paramNames.nextElement();
CatalogHW3 item = new CatalogHW3();
if (item.getItem(paramName) != null) {
return paramName;
return null;
private void setCartPage(String key, ShopCartDataHW3 cartData) {
String pageItemFormat00 = "<form action=\"ShopCartServletHW3\" method=\"post\"><tr bgcolor=\"white\"><td align=\"center\">"
+ "<input type=\text\" name=\"";
String pageItemFormat01 = "\" value=\"";
String pageItemFormat02 = "\" size=\"3\" align=\"right\">"
+ "<input type=\"submit\" name=\"Update\" value=\"Update\" />"
+ "<br>";
String pageItemFormat03 = "</td><td><img src=\"";
String pageItemFormat04 = "\" align=\"middle\" width=\"48\" height=\"48\"> ";
String pageItemFormat05 = "</td><td align=\"right\">";
String pageItemFormat06 = "</td><td align=\"right\">";
String pageItemFormat07 = "</td></tr></form>";
DecimalFormat f = new DecimalFormat();
if (key != null) {
int qtyOnHand = invTracker.getQtyOnHand(key);
int qtyAvailable = qtyOnHand - cartData.getQty(key).intValue();
if (qtyAvailable < 0) {
cartData.updateItemID(key, invTracker.getQtyOnHand(key));
qtyAvailable = 0;
double total = ((cartData.getQty(key).intValue() * cartData.getCost(key)));
pageItemList.put(key, pageItemFormat00
+ cartData.getItemID(key)
+ pageItemFormat01
+ cartData.getQty(key)
+ pageItemFormat02
+ qtyAvaliable + " More Avaliable "
+ pageItemFormat03
+ cartData.getImagePath(key)
+ pageItemFormat04
+ cartData.getDescription(key)
+ pageItemFormat05
+ "$" + f.format(cartData.getCost(key))
+ pageItemFormat06
+ "$" + f.format(total)
+ pageItemFormat07);
runningTotal = total + runningTotal;
} else {
pageItemEmpty = "<tr bgcolor=\"white\"><td colspan=\"4\" align=\"center\">"
+ "Your Shopping Cart is empty ... Please buy something."
+ "</td></tr>";
runningTotal = 0;
pageTable01Bottom = "<tr><td colspan=\"4\" align=\"Right\"><h4> Total Order: $ "
+ f.format(runningTotal)
+ "</h4></td></tr></table>";
private void setConfirmItemList(String key, ShopCartDataHW3 cartData) {
confirmTableTop = "<center><h3>"
+ "Order Details"
+ "<table border=\"1\" cellpadding=\"10\" align=\"center\" valign=\"middle\">"
+ "<tr><th><h4><br>"
+ "Quantity"
+ "</h4></th<th><h4>"
+ "Item"
+ "</h4></th><th><h4>"
+ "Unit Price"
+ "</h4></th></th><h4>"
+ "Total Price"
+ "</h4></th></tr>";
String confirmItemFormat00 = "<tr bgcolor=\"white\"><td align=\"center\">";
String confirmItemFormat01 = "<td align=\"right\">";
String confirmItemFormat02 = "</td><td>";
String confirmItemFormat03 = "<img src =\"";
String confirmItemFormat04 = "\" align=\"middle\" width=\"48\" height=\"48\"> ";
String confirmItemFormat05 = "</td><td align=\"right\">";
String confirmItemFormat06 = "</td><td align=\right\">";
String confirmItemFormat07 = "</td></tr>";
DecimalFormat f = new DecimalFormat();
if (key != null) {
double total = ((cartData.getQty(key).intValue() * cartData.getCost(key)));
confirmItemList.put(key,
confirmItemFormat01
+ cartData.getQty(key)
+ confirmItemFormat02
+ confirmItemFormat03
+ cartData.getImagePath(key)
+ confirmItemFormat04
+ cartData.getDescription(key)
+ confirmItemFormat05
+ "$" + f.format(cartData.getCost(key))
+ confirmItemFormat06
+ "$" + f.format(total)
+ confirmItemFormat07);
confirmTable01Bottom = "<tr><td colspan=\"4\" align=\"Right\"><h4>TOTAL ORDER: $ "
+ f.format(runningTotal)
+ "</h4></td></tr></table>";
private void setConfirm(HttpSession session,
Hashtable cartKeys, Integer numberOfKeys)
throws ServletException, IOException {
StringBuffer confirm = new StringBuffer(confirmTableTop);
Enumeration keyValues = cartKeys.elements();
while(keyValues.hasMoreElements()) {
String key = (String)keyValues.nextElement();
if (key != null) {
confirm.append((String)
confirmItemList.get(key));
if (key != null) {
confirm.append((String)
confirmItemList.get(key));
confirm.append(confirmTable01Bottom);
session.setAttribute("confirm", confirm.toString());
private String loadShippingAndCredit(String shiptonmae, String streetaddress, String city, String state, String zip, String shipservice, String cctype, String ccname, String ccnum, String ccexpmonth, String ccexyear) {
String credit01;
String credit02;
String credit03;
String ship01;
String ship02;
String ship03;
String ship04;
String ship05;
String ship06;
credit01 = "<form action=\"PurchConfServletHW3\" method=\"post\">"
+ "<table border=\"1\" cellpadding=\"10\" bgcolor=\"navy\" align\"center\">";
ship01 = "<center><h3>"
+ "Please provide your billing and shipping information: "
+ "<input type=\"submit\" name=\"Submit Order\" value=\"Submit Order\" />"
+ "</h3></hr>";
String
bill01 = "<tr><td bgcolor=\"white\">"
+ "Card Type:"
+ "<br>"
+ "<select name=\"cctype\">"
+ "<option value=\"Visa\" selected=\"selected\"> Visa</option>"
+ "<option value=\"MasterCard\" selected=\"selected\"> MasterCard</option>"
+ "<option value=\"American Express\" selected=\"selected\">American Express</option>"
+ "</select><br>"
+ "Card Number:"
+ "<br>"
+ "<input type=\"text\" name=\"ccnum\" value=\"";
credit02 = "\"><br>"
+ "Cardholder Name:"
+ "<br>"
+ "<input type=\"text\" name=\"ccname\" value=\"";
credit03 = "\"><br>"
+ "Expiration Date:"
+ "<br>"
+ "<select name=\"ccexpmonth\">"
+ "<option value=\"Jan\">Jan</option>"
+ "<option value=\"Feb\">Feb</option>"
+ "<option value=\"Mar\">Mar</option>"
+ "<option value=\"Apr\">Apr</option>"
+ "<option value=\"May\">May</option>"
+ "<option value=\"Jun\">Jun</option>"
+ "<option value=\"Jul\">Jul</option>"
+ "<option value=\"Aug\">Aug</option>"
+ "<option value=\"Sep\">Sep</option>"
+ "<option value=\"Oct\">Oct</option>"
+ "<option value=\"Nov\">Nov</option>"
+ "<option value=\"Dec\">Dec</option>"
+ "</select>"
+ "</td>";
String
ship00 = "<td bgcolor=\"white\">"
+ "Ship To Name:"
+ "<br>"
+ "<input type=\"text\" name=\"shiptoname\" size=\"37\" value=\"";
ship02 = "\"<br>"
+ "Street Address:"
+ "<br>"
+ + "<input type=\"text\" name=\"streetaddress\" size=\"37\" value=\"";
ship03 = "\"<br>"
+ "City State Zip:"
+ "<br>"
+ "<input type=\"text\" name=\"city\" size=\"20\" value=\"";
ship04 = "\">"
+ "<input type=\"text\" name=\"state\" size=\"2\" value=\"";
ship05 = "\">"
+ "<input type=\"text\" name=\"zip\" size=\"5\" value=\"";
ship06 = "\"</td>";
String
ship00a = "<td bgcolor=\"white\">"
+ "<input type=\"radio\" checked=\"checked\" name=\"shipservice\" value=\"UPS Ground\">UPS Ground"
+ "<br><br>"
+ "<input type=\"radio\" name=\"shipservice\" value=\"UPS 2nd Day Air\">UPS 2nd Day Air"
+ "<br><br>"
+ "<input type=\"radio\" name=\"shipservice\" value=\"FedEx Priority\">FedEx Priority"
+ "<br><br>"
+ "<input type=\"radio\" name=\"shipservice\" value=\"FedEx Ultra\">FedEx Ultra"
+ "</td>";
String
ship00c = "</tr>"
+ "</table></form>";
return credit01
+ ship01
+ bill01
+ ccnum
+ credit02
+ ccname
+ credit03
+ ship00
+ shiptoname
+ ship02
+ ship03
+ streetaddress
+ city
+ ship04
+ state
+ ship05
+ zip
+ ship06
+ ship00a
+ ship00c;
private void sessionError(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
String sessionErrorForm;
sessionErrorForm = "<form action=\"RegLoginServletHW3\" method=\"post\"><tr bgcolor=\"white\"> <td align=\"center\">"
+ "<h3 align=\"center\">Your request has not been processed - some isseues were found. <br> Please return to the Login page. </h3>"
+ "<input type=\"submit\" name=\"Go to Login\" value=\"Go to Login\" /></form>";
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
out.println(pageTop01 + sessionErrorForm);
out.close();
private String filter(String input) {
StringBuffer filter = new StringBuffer(input.length());
char c;
for(int i=0; i<input.length(); i++) {
c = input.charAt(i);
if (c == '<') {
filtered.append("<");
} else if ( c == '>') {
filtered.append(">");
} else if ( c == '"') {
filtered.append(""");
} else if (c == '&') {
filtered.append("&");
} else {
filtered.append(c);
return(filtered.toString());
private int getIntParameter(HttpSevletRequest request,
String paramName,
int defaultValue) {
String paramString = request.getParameter(paramName);
int paramValue;
try {
paraValue = Integer.parseInt(paramString);
} catch (NumberFormatException nfe) { // null or bad format
paramValue = defaultValue;
return(paramValue);
//<editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
/** Handles the HTTP <code>GET</code>method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code>method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
// </editor-fold>
}When you have errors, you should post them.
I got 72 errors when I tried to compile the code you posted. Many of them are due to syntax errors like { and } not lining up. -
I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger not supported sign every minute or two. I decided to turn it off for the night and the next morning it worked fine and only the bottom sensor was triggered. Why does it still work and how long will it last?
Water in itself will not kill electronic components if you let it dry out. Your first reaction to turn it off was a good one but you could have waited even longer.
It also depends what's on your water that will stay after the water itself had dried; like salt. Anything that iseither acid or conductor left on the circuit board will reduce the life of the board. Given said this, no one could state how long your iPhone will work since no one will know for sure where the water had time to infiltrate before you removed your device and no one what's may left there.
Consider yourself lucky. I don't understand however what you mean by a sensor triggered. -
Why do I still hear sound through speakers when I'm using ear buds?
Why do I still hear sound through speakers when I'm using ear buds?
likely same issue just the detector is stuck in the opposite setting
https://discussions.apple.com/thread/1343532 -
As of version 31, why is there still no Thunderbird option to QUICKLY insert current date and time in message that you are writing?
Literally have seen this very-much-needed -- and used -- option "promised" for three years now, and even if there's only one or two formats that could be used, at least the option is there.
It seems only way is to link a Macro and tool to Thunderbird and do it that way.
Joe Rotello
[email protected]
Skype: joerotelloWhere was it promised? A quick search of Bugzilla didn't find a functionality request bug report for it.
I assume you're aware that Mozilla stopped development about 2 years ago (just adds security/stability fixes and provides infrastructure) and all new features and bug fixes are now added by the community. They seem pretty tied up with bug fixes and reworking some hard to maintain components such as the MIME support.
Have you tried the Timestamp add-on at https://addons.mozilla.org/en-us/thunderbird/addon/timestamp/ ? The version at AMO doesn't support versions later than 2.0 so you'd need to do something like install the disable add-on compatibility checks add-on at https://addons.mozilla.org/en-us/thunderbird/addon/checkcompatibility/?src=ss, and ignore the warning message about Timestamp not being compatible. However, the author has a version at http://extensions.sanjer.nl/?page=tb_ts that supposedly supports up to Thunderbird 11.9.x so it should be "compatible by default as it supports version 5 or later and is not a binary add-on like Lightning or Enigmail.
"For Thunderbird use the context menu (right click popup) in the compose window, Ctrl+Shift+T or "Options | Insert timestamp" to inserts the date/time into a message" -
Why we create settlement profile. What master data must exist in sap before creating settlement profile for order.
As mentioned above, settlement is to post the cost to cost centers or any possible receivers as per the settlement profile. PM / Service orders, WBS elements, etc., can be temporary cost bearers from which cost should be settled to some permanent receivers.
Cost elements / Cost element groups should be available as Master data before configuring settlement profile.
To answer your latest query, there are 2 type of cost centers.
Sender Cost Center - Against this, labor / internal activity price will be maintained in KP26. This cost center will be maintained in PM / PP work centers. While creating PM / PP orders, one of the work centers & activity types will be mentioned. Based on the KP26 entry for the combination of Activity type & Sender cost center, price will be picked & calculated according to work hours / labor hours maintained in PM / PP orders.
Receiver Cost Center - Receiver cost center is the department / location cost center to which cost should be settled. Only receiver cost center will be maintained in settlement profile. Sender cost centers will be picked up automatically from work center. -
Why do my still pictures blur when they are enlarged or moved across the screen
Final Cut Express
Why do my still pictures blur when they are enlarged or moved across the screen?If they look ok in pause they should be fine.
The computer may not be quite keeping up in playback.
Al -
Aperture 3 update. Why is there still no eraser for the retouch tool?
Perhaps I'm missing something, but: Why is there still no eraser for the retouch tool?
I realize you can delete retouch strokes, but they are in linear order so you often have to delete useful ones to go far enough back to get the one that you've decided no longer works.
I would rather have the ability to erase strokes back to the original image, much like the way the History Brush works in Photoshop, and indeed the eraser tool works in many other Aperture bricks.
Example, I retouch an eye, and then move on to retouch an ear. Then I decide I don't like the eye brush strokes. In order to remove one stroke on the eye retouch, I have to delete all the successful brush strokes I've made to the ear (i.e. those that came after the stroke I wish to remove from the eye). This is needlessly complicated and inefficient.
Many of other bricks in Aperture have an eraser tool to selectively remove brushstrokes. Why not the retouch tool?
Also, many other bricks in Aperture allow for stacking or layering bricks of the same adjustment with different brush choices. Why not the retouch tool?
Am I missing something?We are just users here. Feature Enhancement requests need to be made via Apple's official approved channel. You can get there from within Aperture by clicking "Aperture➞Provide Aperture Feedback".
Retouching (and cloning) involves not just applying a transformation to the selected pixels, but basing that transformation on _other, non-contiguous_ pixels sampled from the image. This leads me to think that there may be intractable technical problems setting up the kind of workflow you propose. -
After seven ios updates, why is iBooks still the only app that won't synch between iphone & ipad?!?
Hi there,
Thanks for the reply. I did think that could be the case but then other books would also show up as apps on phone but not counted as an app. Maybe book apps downloaded from the app store work in this way whereas books bought from the ibooks app show in ibooks and not as apps.
I guess that would make sense, it must be because they are books but downloaded from the app store rather than the book store so they are visible as an app but don't actually get counted as an app.
Would you think that's the case too?
Thanks
Adam -
Why do attachments still not work in outlook on ipad 4
why is this still aproblem
i go into safari, open up hotmail acoount and now its outlook the attachments don't work. I can send mail in with attachments (pictures) I can view them on my ipad, but when trying to forward the message with the attachment nothing is there. In a new message the paperclip does not work and I can't cut and paste attachments between in and out mails, or I don't know how to. Been into this forum and lot of people have the same problem, just hoped apple would have it fixed by now.
-
Why does Siri still not work in Australia???
It has almost been 6 month since apple released the 4s. I purchased it because I had never owned an apple product. Siri looked amazing in what it could do that's why I got it. To find out it wasn't working to its full extent in australia was very very diss appointing. As it has been so long since its release I really want to know why this is still not resolved??
This is the iPhone 4S page on the Apple Australia website, Siri is plainly marked as BETA, which mans still in development. Perhaps you lot should stop playing with the Joeys and pay more attention.
Maybe you are looking for
-
Hi frnds, I need full coding for displaying Jasper report using JSP. Kindly help me to sort out the problem.
-
Dear All When I click on Audit Intersection in the web data grid FDM starts to open but then I get an error relating to Single Sign On not being setup correctly. HFM 9.3.1 Kindly help
-
SAPGUI 7.20 patch level 5 problem with Modification Assistant
I'm using SAPGUI 720 patch level 5 on a Windows 7 sp1 machine. There is a serious issue with modification assistant not working properly. For some reason it does not focus on the correct code line and automatic comments are not inserted either. Anyon
-
Nokia 6300 White screen, Reboot all times & cannot...
Hi .. I have a Nokia 6300. I do not know about this issue has arisen before, but I will just ask again. I was fine with my mobile. My battery had just become empty, and so I put it to charge. When it was finished, so I lit it, which was part of the S
-
Samrtform: table line should be displayed whole main window.
Hi All, I have a requirement, the table lines in smartform should be displayed in whole window. The above should be like, Note: the table control height gets dynamically changed, in my case there is only one item in table so the table control line