Why am I suddenly getting "Access Denied" when I try to enter text on a form? Windows 7, Reader XI

I have been using Adobe Reader for many years and scan forms into my computer so that I can fill them with text. I have suddenly started getting Access Denied pop up when I attempt to do this. Does anyone have any thoughts as to why or how to correct?

Yes, I am adding comments onto a scanned image and the reader is v. 11.0.10. 
I am Secretary of an organization and rather than hand write all the necessary forms I have them scanned in and then I would position the cursor to type the information on the them. Linda

Similar Messages

  • I get access denied when I try to search on your site.

    Please help me. I get access denied when I try to search on your site. I have emptied cache. I tried Safe Mode the way you suggested. Still access denied (though my printer then would not respond to me and I spent $85 to have my It consultant fix that problem.

    Hi,
    You've opened 3 different threads for the same issue. Please only open '''ONE''' thread per support request.
    Continue here [https://support.mozilla.org/en-US/questions/995124?esab=a&s=&r=3&as=s /questions/995124]
    Closing thread

  • Get "Access Denied" when click open a PDF file

    Hi Friends,
    Get "Access Denied" when click open a PDF file linked from SharePoint 2013 page.
    What are the route causes any one is remove the permissions are stopped the inheritance permissions of the library.
    Can anyone face the same issue please help me.
    Thanks,
    Tiru
    tirupal

    Hi,
    If you are able to open the same document earlier,then  anonymous access enabled on your doc library then.
    If you are facing this problem in first time,then you do not have required permission (may be custom permission level has been set ) on it.
    Murugesa Pandian.,MCTS|App.Development|Configure

  • I get access denied when I add a page to a workset in EP 7

    I get access denied when I add a page to a workset in EP 7.
    Please advice.

    Hello,
    This seems to be a permission issue. Assign the user id proper permission, say system_admin_role and then try.
    Regards
    Deb

  • Why do I keep getting an error when I try to sync my phone with iTunes?  It says I don't have enough privileges.

    Why do I keep getting an error when I try to sync to iTunes? The error says "you don't have enough privileges?"

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Why can't I get past 50% when I try to download Flash? (MacBook Pro, Firefox)

    Why can't I get past 50% when I try to download Flash? (MacBook Pro, Firefox)

    >About This Mac
    What OS version?

  • Why do i get access denied when trying to download CS6 Design & Web Premium?

    I have a serial number for CS6 Design & Web Premium. I have a new computer I want to set it up on. I went to download it from Download CS6 products but I keep getting:
    Access Denied
    You don't have permission to access "http://trials2.adobe.com/AdobeProducts/DSST/CS6/win32/DesignWebPremium_CS6_LS16.7z" on this server.
    Reference #18.d1e1a60.1425598287.217a0f4
    Does anyone know what I'm doing wrong?
    Thanks for any help,
    Noah

    Make sure you have cookies enabled and clear your cache.  If it continues to fail try using a different browser.

  • Oracle Apex export application getting access denied when trying to download

    DB: 11.2.0.3
    Apex: 4.2.2.00.11
    Apex Listener: 2.0.3.221.10.13
    WLS: 10.3.6.0
    Chrome: Version 29.0.1547.76 m
    and IE 10.0.9200.16660
    I'm the admin of the workspace that has one application. Made a change to the application and went to export the application so I can source control it.
    Followed the Export wizard while in the application, hit the Export/Import button and clicked Export. Changed the File Format to "Database", Export Supporting Object Definitions to "No" and left everything else as default. Clicked the Export Application button and get "Application 108 exported" success maessage. Navigate to the Manage Export Repository and I see the exported application labled "f108.sql and I click on it and I get "Access Denied".
    Whats the trick? What am I missing?
    If I change File Format to "Unix" or "DOS" the file automatically downloads.
    Thx,
    Russ

    Hmm I wonder if it has something to do with:
    bug #16760897
    http://www.oracle.com/technetwork/developer-tools/apex/application-express/apex-422-known-issues-1940409.html
    The bug description mentions ORA-06502, but get_file has a when others exception handler that simply returns "Access Denied".
    What do you folks think?

  • Getting access denied when trying to loging to sharepoint 2010 site collection.

    only Site Collection Administrators  are able to logging in to the site,other than that
    If i give any View or read or contribute permission to any user then he is not able to logging in to the site getting Access Denied ERROR.
    Below is the error generated in the LOG folder & attached here with screen shot.
    Request (GET:http://sharepoint-app:2525/_layouts/accessdenied.aspx?closeConnection=01
    vijay kumar designer 2010

    Tanq it solved my problem Fadi
    Abdulwahab
    vijay kumar designer 2010

  • Windows 2008 R2 intermittently getting access denied when logging in

    Hi, 
    I recently built 2 new Virtual Machines. They both run on Hyper-V (version 6.2x).
    One is Windows 2008 R2 standard and the other Windows 2008 R2 Datacenter. These are both remote desktop servers. 
    These are both connected to a domain. 
    The domain controller is linux/samba based, this will mimic the Windows NT4 style domain controller environment. 
    Within each Virtual Machine I have a remote desktop users group, that is a staff group. 
    Intermittently users get an access denied error when logging on. This only happens when logging on as domain users. 
    If this happened all the time, I might think the machine needed to be removed and re-added to the domain but as it's intermittent, I don't see the trust relationship as the problem. 
    Any ideas? 
    Thanks

    Hi,
    Thanks for your post in Windows Server Forum.
    Before providing you some information, I would like to get some more information to resolve your issue.
    - Have you notice any specific error when trying to remote login?
    - Did you check GPO setting option “Allow log on through Remote Desktop Services”
    As group policy and the user group are interrelated with each other. There are 2 types of user rights.
    (1)   Logon rights  (2) Privileges
    These two plays an important part in allowing an RDP session to the server. Also need to check in GPO Setting for more option.
    a. Allow log on through Remote Desktop Services : Users\Group must be added for Remote Session
    b. Deny log on through Remote Desktop Services : Users\Group must not be added for Remote Session
    For checking the setting in GPO follow below path:
    - Start > Run >gpedit.msc
    - Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment
    For more information, refer beneath article.
    “Allow Logon through Terminal Services (Remote Desktop Services)” group policy and “Remote Desktop Users” group.
    http://blogs.technet.com/b/askperf/archive/2011/09/09/allow-logon-through-terminal-services-group-policy-and-remote-desktop-users-group.aspx
    Hope This Helps!
    Thanks.

  • Keeps saying 'Secure Zone Access Denied' when I try to log in

    I'm try to test out my new site. I made an account to log in but when I log in it just says,
    "Secure Zone Access Denied"
    What's wrong? It let me log in as a user for a while but after a few minute this happened and now I cannot log in as a user at all....

    I actually made a second account to try out and it works so for some reason it's just that first account that doesn't work... Weird....

  • HT1926 Installation of latest  itunes update stopped, gave error message re couldn't find MSVCR80.dll. Suggested reinstall. Tried but that generated same message. Now get that message when I try to open itunes. I have Windows XP. Help!

    Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll"  Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!

    Hey jeight26,
    When you uninstalled and reinstalled iTunes, did you use this article?
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Sincerely,
    Delgadoh

  • When I try to select text from pdf-documents the pdf reader cannot select a single line.

    When I try to select the text from a pdf file instead of selecting a line, the paragraph gets selected. The document does not have any document restrictions, and the text is not in an object form. Any reason why I am not able to select the text.

    Hi,
    Which 'Documents' folder are you referring to?
    A screenshot of the issue would be more helpful for me to understand the issue.
    Regards,
    Florence

  • Users getting access denied when trying to create a security group

    Hello,
    I created an MPR for granting right through an approval workflow for joining security group, but getting the following error. Any thoughts what could be going wrong?
    Error processing your request: The operation was rejected because of access control policies.
    Reason: The operation failed as a result of insufficient access rights.
    Attributes: ExplicitMember
    Correlation Id: edc226e9-ecb9-42c2-ab20-4fa8b5643056
    Request Id:
    Details: No policy grants the Requestor permission to complete all changes.
    This is what I see in the even log:
    Requestor: urn:uuid:9373552a-c063-4fb9-abcd-3501d151a061
    Correlation Identifier: edc226e9-ecb9-42c2-ab20-4fa8b5643056
    Microsoft.ResourceManagement.Service: Microsoft.ResourceManagement.WebServices.Exceptions.PermissionDeniedException: ManagementPolicyRule ---> System.Data.SqlClient.SqlException: Reraised Error 50000, Level 16, State 1, Procedure DoEvaluateRequestInner,
    Line 1319, Message: Permission denied: <ai><Name>ExplicitMember</Name></ai>
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
       at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
       at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
       at System.Data.SqlClient.SqlDataReader.get_MetaData()
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
       at System.Data.SqlClient.SqlCommand.ExecuteReader()
       at Microsoft.ResourceManagement.Data.DataAccess.DoRequestCreation(RequestType request, Guid cause, Guid requestMarker, Boolean doEvaluation, Int16 serviceId, Int16 servicePartitionId)
       --- End of inner exception stack trace ---
       at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean
    isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier, UniqueIdentifier requestContextIdentifier, Boolean maintenanceMode)
       at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Put(Message request)
    Thanks,
    John

    Hi,
    You probably missing another MPR to give the right (checkbox "Grants permission") to Add and Remove value for attribute "Explicit member". Set an authorization workflow is not enough!
    Regards,
    Sylvain

  • Why am I suddenly getting error messages when updating the vault?

    Hi, I would greatly appreciate any advice anyone here can offer of how to correct a problem that started recently.
    I've updated the vault for Aperture successfully many times before, but now, when I attempt to update the vault I've started receiving error messages. Everything seems to proceed normally at first, a progress bar opens showing "Comparing library to vault", then when that is done, another opens showing "updating vault 'photograph lockbox' from library". But after that I now get an error message which reads:
    "Update Vault Error:
    13345 errors occurred. The first 5 are:
    Error creating a directory in vault ‘Photograph Lockbox‘.
    Error creating a directory in vault ‘Photograph Lockbox‘.
    Error creating a directory in vault ‘Photograph Lockbox‘.
    Error creating a directory in vault ‘Photograph Lockbox‘.
    Error creating a directory in vault ‘Photograph Lockbox‘."
    I have a Mac Pro running 10.4.11, my version of Aperture is 1.5.6. I haven't updated either of those for financial reasons and because I have no pressing need to. And everything seemed to be working fine until a couple of weeks ago when the updating errors started.
    My vault is in a Seagate portable hard drive.
    Does anyone have any ideas about how to fix this?
    Also, does this mean that none of my new photographs are being backed up in the vault? That would be scary!
    Thanks for any advice offered.
    Rick

    Hi
    Exactly the same problem started for me a little while ago.
    Firstly, you are correct in assuming that subsequent backups are not taking place. This can easily be confirmed by looking at the colour of the synchronization button. Red circular arrows indicate that there are Digital Masters in your library that have not been backed up in a vault. What colour are yours?
    The problem is either a program error or hardware or both.
    I suggest that you create another vault, this time on your desktop. Backup to it. If this is successful the problem is not with the Aperture program.
    I was advised to format my hard drive as "Mac OS Extended (journaled)" before attempting to backup.

Maybe you are looking for