Why am I suddenly getting the spinning kaleidoscope whenever I try to move on a page?

Today I started getting the spinning kaleidoscope whenever I try to manuever on a web page. For example, checking email boxes of messages I want deleted and when trying to scroll down on the page. Kaleidescope pops up and spins for a few and then I can make some moves and it starts again. ALmost like it's loading slow? Software updated. Here are the specs: Mac OS X Lion version 10.7.5 / Processor 2.3 GHz Intel Core i5 / Memory 4GB 1333 MHz DDR3.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Why do I get the spinning ball when I try to delete some photos?

Why do I get the spinning ball when I try to delete some photos?
I then have to Force quit everytime.
What should I do?

Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). A Finder Window should open with the file selected. Does it?

Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

Why am I suddenly getting the following error message: "The specified location is reserved by the operating system and is not permitted. Please choose a different location." I've been recording all night and I haven't changed any of the parameters.

Hi Tom,
Looks like we have problem here as we see another blank post from you here. It's probably something to do with your email. Let me send you a PM with my email address and we can communicate that way.
Thanks,
Kevin

I'm getting the rainbow wheel when I try tp pen in internet page (Safari). The page half loads then appears to freeze with the rianbow wheel. I get the same result when I try to stream a movie from NETFLIX. Freezes up rather than plays (after loading).

I get the rainbow wheel when I try to open an internet page. It loads halfway, then freezes, with the rainbow wheel whirring around. Smae thing happens when I try to stream a movie on Netflix. The movie loads, then the wheel shows up and the screen freezes. Same thing when I try a DVD, it takes the disc, but won't play when I hit on PLAY.
I am repair permissions, and all that I can do, but I am a novice. Any help would be greatly appreciated because I spend big bucks and drive 40 miles to get Apple help.
Sharon in the woods of Idaho

Welcome to Apple Support Communities.
If your profile info is up to date, you probably have a 2006 or 2007 MacBook with a CoreDuo or Core2Duo.
It probably came with 512MB or 1GB RAM memory and a 60, 80, or 120GB hard drive.
You're still running OS X Tiger, 10.4.
Your DVD drive may be dirty or wearing out.
For specifics about your computer, click on the  Apple Logo in the menu bar, then About This Mac, and More Info... to find details.)
You may be running short of hard disk space. You should have at least 10% free, or 10 to 15GB free for best performance. Less than that, and your hard disk is spending lots of time searching for places to store data.
Complex web pages and sites like Facebook and Twitter, and pages using Adobe Flash, and high-bandwidth applications like video streaming from NetFlix can all cause your computer to run slowly, and the fan to run at high speed, because the processor is working hard. Conversely, email is not terribly resource-intensive, and probably still works pretty well.
Several things can each provide a small performance increase (listed in no particular order):
Adding more RAM memory. Upgrade to 2Gb to give your programs a bit of 'breathing room', especially if you are running more than one program at a time.
Erasing the hard drive and reinstalling the current operating system and programs from scratch. This erases all your existing programs and data. Unless you have backups and program discs, you lose everything currently stored on it.
Installing a higher capacity, faster hard disk, say 250GB or 320GB will give your programs and data more space, and perhaps faster access if you replace the factory 5400rpm drive with a 7200 rpm drive. If your current hard disk is nearly full (less than 10% free space), the drive has to 'thrash' to free space to store information.
Upgrading the operating system to OS X 10.5 Leopard or OS X 10.6 Snow Leopard. Both are discontinued OS X versions, still available to order directly from Apple, but not likely found on a store shelf any longer. An upgrade to OS X 10.7 Lion might not be possible for your MacBook (details here: http://www.apple.com/macosx/how-to-buy/), and Lion would likely cause a further slowdown, because honestly, Lion is optimized for newer, faster dual-core or quad-core computers with fast video chipsets and 4GB or more of RAM.
A faster internet connection, for example: I switched internet providers to get a 3.0Mb DSL connection (up from a 512Mb connection) for an extra $10 per month, and saw downloads and internet browsing speeds increase dramatically. With the slower connection, it was not possible to watch video.
Will all of these upgrades together get you close to the performance of the latest MacBook Air or MacBook Pros? NO!
Ultimately, you have a 4- or 5-year-old computer, and spending up to several hundred dollars for upgrades might not be a worthwhile investment for you, versus applying that much money toward the cost of a new(er) Mac, and perhaps passing your MacBook on to a friend, child, or grandchild who needs mainly email capability.
If a brand new Apple is not in the budget, consider a refurbished Mac from the Apple Store online. These are reliable computers from 'last year's models' and have the same 1-year Applecare warranty as a brand new model, and often sell at a discount of 10 to 30 percent of the price when the model was introduced.
I'm using a mid-2007 MacBook, purchased as a refurb from Apple in late 2007. It came with 1GB RAM, a 120GB 5400 rpm hard drive, and OS X 10.4 Tiger. Over the years, I've upgraded it twice. Firs to 2GB, then to 4GB RAM, to a 320GB drive, then to a 500GB 7200 rpm hard drive, and to OS X 10.5 Leopard, and then to OS X 10.6 Snow Leopard. Rather than one more round of upgrades to OS X 10.7 Lion, I'm saving for a newer MacBook Pro or MacBook Air at some time in the future.

I get the following message whenever I try to open FireFox

"microsoft (C) Register Server has stopped working"
Hi there.
Out of nothing I get the following message whenever I try to open FireFox :
"'''microsoft (C) Register Server has stopped working'''"
Internet Explorer won't open either, but it doesn't give a pop-up or anything, it just pretends I didn't open it.
The only way I can open a browser now is by running it as 'administrator'
I've taken the following steps, none of which have had any effect
- tried the DEP on trick in windows system
- Fully updated win 7
- Re-installed Firefox
- reboot, reboot, reboot
- searched online for solutions
but..... :(

ooh my G#D !!! Norton is Best ! thank all you guys ! ;) im install norton anti virus and my fire fox is workin after scan!!! :))) huuuuurrrrrrraaaaaaaaaaaaaaa

Why am I suddenly getting the dreaded "ID = 5000" error with Illustrator 5.5? I'm only using CC for Muse.

I only use Adobe Creative Cloud for Muse... no other option. I have CS 5.5 and am suddenly getting the "you do not have enough access privileges" error and can't save any illustrations. What the hell is going on with Adobe?

shambles,
You could try to reinstall using the full three step way (otherwise strange things may linger):
Uninstall (ticking the box to delete the preferences), run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

My MacBook Pro has slowed to a crawl. It started when I was printing off the Internet. Now I get the spinning circle in just about every move. Any help?

My MacBook Pro has slowed to a crawl. It started when I was printing off the internet. Now I get a "spinning ball" with many actions. Any help?

Try your fellow MacBook Pro owners forum -
MacBook Pro
Support:
http://www.apple.com/support/macbookpro
Latest (manual) downloads from Apple (but check vendor sites also for scanners, printers etc) and rule out a bad cable as well.
Apple Downloads

Why do I get the following message whenever I try to launch Premiere Elements 11??

Hi, hoping someone can help me out here. I am new to Adobe Premiere Elements 11 and whenever I try to launch it, I get the following message:
Before this message appears, while Premiere is loading it allways gets hung-up while trying to load the SmartSound Adobe Plugin:
I tried loading it from the Organizer and get the same result. I uninstalled and reloaded with no luck. I meet the system requirements for Mac and am at a total loss. ANY help would be GREATLY appreciated!!
Mike

Steve,
I tried the suggestions contained in the link (even validating the fonts...), and still no luck. It get hung up on the following screen EVERY time:
Must be something with the SmartSound plugin I assume... Thanks in advance for your help!
Mike

I get the blue screen whenever I try to install the bootcamp drivers in windows 7

I just recently installed windows 7 home on my 2011 imac useing bootcamp.
Everything seemed to install fine however whenever I try to run the bootcamp drivers in windows to get my mouse and wifi and all that to work I get a blue screened.
Any Ideas?
Ive followed the exact instructions from the manual for OSX and nothing seems to work.

Question: Does the Windows disk that you are using have SP2 (Service Pack 2)? In other words, is your version of Windows a FULL version (and not an upgrade version) of XPSP2 Home Edition?
Having SP2 is a requirement to have XP installed on an intel Mac.
If you already have the right version then I am not sure what exactly the issue may be.
Axel F.

Why am I suddenly getting the following message when starting Firefox 7.0.1, "using registry key software appdatalow\". I am using Win7 Pro 64-bit.

I had just installed a CAD package that required it to be run in compatibility mode (XP). I now get a window with the following message when starting Fierfox v7.0.1 according to the Help pull down menu and then About.

http://www.symantec.com/security_response/writeup.jsp?docid=2010-011922-0125-99& tabid=2
The story goes on. I am sharing this with other users for information only based on my experience with the product. I've owned a MAC since they were first introduced in 1984 and have used Norton for years. If the virus Bloodhound was real, and not just a false heuristic positive (which is totally possible) it came in on the heels of my downloading a free PDF OCR X (before reinstalling the updated version of Norton for 10.8.3) and using it to convert .jpgs > PDF OCR X text >MS Word > Adobe .pdf as that virus (Bloodhound.PDF.20 is known for exploiting weaknesses in Acrobat and Adobe .pdfs). I have never been happy having to use the MS Office suite of office products for MAC, but EXCEL on a PC is only compatibile with EXCEL on a MAC.
When I got the Bloodhound warning after running a quick scan, I ran a full scan (1,050,660 files) with the same result. I looked at my terminal - nothing happening. I called Norton, who in turn convinced me to purchase an $89.98 subscription + $19.95/month for their spyware and virus removal service (the same sales pitch I've heard from other security providers who sell services through panic). The tech, who said it was probably false, played around with my computer via remote login, and then signed off, saying everything was okay. I reran a full scan and there was the virus again. Called tech support again. Finally got the virus quarantined and tossed it. The reality is that there was a 50/50 chance that it was something because of the way MS Word was behaving when I tried to save the file created from the ocr'd jpgs (error message: disk full- when I have 250GB of free disk space). I had to resave the files with a different name and place them in alternating folders. That havoc is now gone, but I will not be keeping the subscription. Just FYI.

Why do I always get the spinning wheel of death when trying to open a CC program??

It eventually opens or stalls out and I have to try again. Waaay sloooow - My CS5.5 is better - what's the deal? Using Mac OS X Lion and have plenty of memory.
Is anyone else having this problem? - I don't have time to wait several minutes for the program to open.

Hi bludetailsdesigns,
You can try these & check.
1.If internet is fine then this might be becase of Creative cloud files, please try the steps metioned in http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g-cc.html and see if it works.
2.Please navigate to ~/Library/Application Support/Adobe/OOBE/opm.db and trash it. Try to launch CC desktop and sign in with your Adobe Id (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html) .
{Note for step 2: The file is in the user Library, not the Applications folder. To see the hidden user Library (not the system Library) in the Finder click on the Go menu item and then hold down the Alt / Option key. You will see Library appear between Home and Computer. Click onLibrary and then navigate to Application Support > Adobe > OOBE.
Alternatively open the Terminal and paste in the following and then press the Enter / Return key:
rm ~/Library/Application\ Support/Adobe/OOBE/opm.db, This will also delete the file}
Hope it works.
Regards,
Rajshree

Why do I keep getting the 1439 error when I try to reset?

I see many other people have this issue. I have an iPod 160GB classic and I have followed all the steps in the support page to reset it without luck. I've used two different PCs. Nothing is connected USB except for the iPod, the latest iTunes was installed on both machines and both have USB2.0 ports. Any clues?

I forgot about this since I upgraded to an external burn drive but I used to get this error whenever I tried to used a DVD or CD Blank Disc that was a DVD + R or a DVD +/- R or RW Disc Try using only the DVD -R or DVD -RW Disc (Minus sign - )

Update to 10.9.5 has destroyed my Macbook Pro, please can someone help just getting the spinning disk whenever I ask it to do anything

Hi,
Updated a couple of weeks back an since my Mac has been almost unusable.
Running a 2012 MacBook Pro 4GB Ram, Intel I5 2.5Ghz with a 750GB Harddrive. This is a home PC not a work machine, typically accessing internet over WI-FI and for 2 years has run like a dream.
Seen some threads on here already about deleting the Open Directory Folder but seems to make little difference.
Sadly I haven't taken a back-up for ages as haen't had my external drive plugged-in.
Short of copying any pictures and docs elsewhere and starting a fresh I'm running out of ideas, anyone able to help?

But the Yosemite beta is not open to the general public, just people that signed up until they reached a million testers. So it is unlikely you can get a legal beta copy.
Please post the EtreCheck output
<https://discussions.apple.com/docs/DOC-6174>
There is a chance you have software that is not playing nice on Mavericks.

Why do I keep getting the following error message error code 0x80020022 when I try to burn a DVD using Mac Finder?

Why do I keep getting the following error when I try to burn a DVD using Mac Finder?
"The disk can't be burned because communication between the computer and the disc drive failed (error code 0x80020022)."

I forgot about this since I upgraded to an external burn drive but I used to get this error whenever I tried to used a DVD or CD Blank Disc that was a DVD + R or a DVD +/- R or RW Disc Try using only the DVD -R or DVD -RW Disc (Minus sign - )

Since upgrading to Mavericks from Snow Leopard, I am continuously getting the spinning disk???

I am so sorry for not including my computer information, I upgraded from Snow Leopard to Mavericks. I have an I-Mac   3.2 GHZ Intel Core 13 processor, 4 GB 1333 MHz DDR3---Now I am constantly getting the spinning disk when I try and do the things I used to do without problems. Is there something that can fix this? I downloaded from the Apple Store App

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
     Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).

Why am I suddenly getting the spinning kaleidoscope whenever I try to move on a page?

Similar Messages

Maybe you are looking for