Why am I told that fonts are not available when the file was originally created in Fireworks?
I get the "Fonts not available" message when I open up a document, i.e. open up a png document in the program/computer/etc. where the program was created in the first place.
I don't get this. How can the fonts not be available when I'm using the same program that used these fonts originally? Having said that, the appearance doesn't seem to change.
Are the fonts in question installed on your computer?
Fonts are not part of a program, fonts are installed on a system. Once installed, a font is available to any program that uses fonts. If you're opening a document that was made in the same program, but on a different system, using fonts you do not have installed, then you will get that message.
So... Are you opening a document that you created? Are you opening the document on the same system on which the document was created? Have you made any changes to the installed fonts (installed or uninstalled any fonts)?
What version of Fireworks are you using and what OS are you running it on?
Similar Messages
-
Loading new class files when they are not available when the JVM starts
Simple Question
Is it possible to load class if it was not compiled when the original JVM was launched?
More Detailed Question
Our build system is getting a slight tweak with a new test runner. After our build system compiles the file, I would like to be able to load the files that have just been compiled.
Our build system runs inside its own JVM and calls ant scripts to run the different processes(Separate JVM). The new test runner will also be called from the build system(Same JVM) but not as an ant target. Is it possible to call the newly compiled files from inside the build system JVM if they had not been created on the start of that JVM using reflection?
Thanks in Advanced!public class t
public static void main(String args[])
throws Exception
Writer out = new FileWriter("Foo.java");
out.write("public class Foo implements Runnable {\n");
out.write(" public void run() {\n");
out.write(" System.out.println(\"run like the wind\");\n");
out.write(" }\n");
out.write("}\n");
out.close();
Runtime.getRuntime().exec("javac Foo.java").waitFor();
((Runnable) Class.forName("Foo").newInstance()).run();
} -
I can't get iPhoto back. Where has it gone?
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always. -
SWF movies are not animated when the file's opened directly.
Firstly, although I've been using Flash on and off for years (since CS3) I don't use it very often so I apologise if my issue seems simplistic!
Basically, I used Flash CS3 for a few years to create basic animations for clients, involving simple scrolling text, without any problems. Recently I upgraded to the CS4 Master Suite and then CS5 Master Suite within a couple of days of each other and I now need to use Flash to make a change to an old animation. When I opened the CS3 file it appears as expected and I made the changes to the text (changing a word or two within a line of type).
When I right clicked on the type relevant frames within the timeline I noticed that there is now more than one version of tween available, and that classic tween was already selected (I think I better buy a new teach yourself Flash CS5 book!)
Anyway, that was allI needed to do so I initially pressed return and the text scrolled across the stage as expected. But when I clicked on CONTROL / TEST MOVIE / TEST (or cmd+Return on my Mac) the SWF file that appears is static and the text does not scroll at all. If I publish the movie using Actionscript 3 or 2 the resulting SWF file is also totally static. But if I drop the SWF file into the relevant website folder and view it through Dreamweaver's browser view facility it works perfectly and scrolls just as expected. Equally, opening it using the Opera browser works too.
I've tried altering the CS3 file and testing the movie in Flash CS4 and Flash CS5 but the same thing happens. It's a bit time wasting and inefficient wanting to test an animation as a SWF file by double clicking on it and only being shown a static image. Is this a well known problem as I couldn't find any mention of it during my search?
Thanks for reading and I'd really appreciate help resolving this issue.Update:
I downloaded the newest Flash Player and double clicked the problematic swf file again. I was a bit surprised to see Flash CS5 start up and display the floating test window with the problematic static animation as before. I closed Flash CS5, right clicked on the swf file and chose "Open With Flash Player". The animation opened in the new Flash Player and was working fine.
So it appears that only Flash CS5 and CS4 are having the issue playing the test movie that was created in the very same program? -
I am trying to upgrade my Creative Suite 5 to Creative Cloud but am being told that I do not qualify for the upgrade, does anyone know why?
If you have the Education version you do not qualify due to the LARGE Education discount
-
Hi ! How to identify a 2.0 usb on the Mac mini because I was told that they are not all 2.0
Someone knows how to identify the usb 2.0 on a mac mini because I use the mini just for music and I have been told that they are not all 2.0.
Actually, you can have a mixture of USB2.0 and USB 3.0 devices on the 2012 Mini's. USB3.0 devices will operate at 3.0 speed and USB2.0 devices will operate at 2.0 speed. It all depends which device is plugged in first not the slowest speed device. So, if a USB3.0 device is plugged in first, it will use SuperSpeed and USB2.0 devices will use High-Speed. If a USB2.0 device is plugged in first, ALL devices (3.0 and 2.0) will operate at High-Speed (USB2.0).
In the System Information under USB there are two types of USB hubs. One is USB High-Speed Bus which will show the USB2.0 devices. Another is USB SuperSpeed Bus which shows the USB3.0 devices. You can see your devices under each Bus.
Below is from this Apple Link:
How do I get the best performance from the USB 3 ports?
The first device you plug in will configure the port, so always connect USB 3 capable hubs or devices first.
What happens if I plug in a USB 2 device into the USB 3 port first?
If you plug in a USB 2 hub first, all devices connected or "daisy-chained" to that hub will operate up to the maximum transfer rate of USB 2 speed (480 Mbps). -
Suddenly...some fonts are not available.
InDesign CC 2014 Crashed today. When I relaunched it I found that some of my fonts are not available. I'm on a Mac Pro running Yosemite (10.10)
For example, two weights of Proxima Nova are available (Light and Regular) but the other weights are not. Those other various font weights are available in other apps (namely Illustrator).
Below are various screenshots
1. Screenshot from InDesign
2. Screenshot from Font Book to show the fonts are active
3. Screenshot from Illustrator CC 2014 showing these fonts are available there.I quite InDesign. Then I did a search and trashed all the AdobeFntXX.lst files that had a two digit number. I deleted the files and rebooted my computer. I then launched InDesign and had the same problem.
So, I quite InDesign again and deleted my Indesign Prefs and Saved Data file and relaunched. Same problem.
Very strange... since everything is okay in Illustrator, Photoshop and even an older version of InDesign CS6. -
HT4059 Why Indian authours and Indians books are not available in your iBooks store.
Why Indian authours and Indians books are not available in your iBooks store.
Thats because Indian publishers may have not signed an agreement with Apple. Worst part is even if I want to publish a book for free using official iBooks Author, it does not publish on Indian iBooks Store.
-
I created my iTunes account when I was living in Venezuela, but have relocated to the US now. How do I change my apple store to allow me to download apps that are not available in the store available to Venezuela?
Sorry for the long 'subject'! hahaha I am new to the community. This should be fun!No, What I mean is, Now I am leaving in USA but every time that I tried to download an app only appear app available in Venezuela no the one available in USA.
I already change my address and select USA but still I can not download app for USA -
How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library. -
When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, RichIn order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.
-
Updated last night, my keynote presentation is gone. Now trying to recreate. Keynote states that animations are not available on master slides. Help?
I'm no help, but I lost a huge file too with the 10.9.2 update. It isn't ANYWHERE. Totally embarrassing in front of a large meeting.
-
I just purchased a mac mini and wondered if it's safe to download from the internet (such as Kobo) that are not available on the app store. It asked me if I was sure it was safe, so it's got me worried.
If you know the sites are OK, then download away.
-
I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?
Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk
-
Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7
Yep. You need to touch the sleep/power button once to silence the ring, and twice in order for the call to go directly to Voicemail.
Personally, I dont understand why Apple eliminated this. If you wish to give Apple feedback, do it here:
www.apple.com/feedback
Maybe you are looking for
-
can anyone explain or point me in the direction of the reaoning behind iphotos behaviour with Albums and Smart Albums in 2 situations. the first, is when using Airpics App and Server, the second when viewing a shared library. my set up is my iPhoto m
-
Hi, We have one IDOC with some Enhanced fields in R/3. When ever we trigger the idoc from R/3 the inbound paylod in MONI is comming correctly but when we check the received file in the AL11 of XI Server means we are missing so many fields in that fi
-
<p>Hi,</p><p> I am sorry i am writing it out here but i justwanted to discuss with you all that I have a fulltime positionwith Wachovia for Hyperion Developer. let me know if anyone of youis interested in it. This position is fulltime position with
-
Can someone review my code please
I wrote a program for converting miles to kilometers and kilometers to miles. I've got it working good now, but there's something I can't figure out. The way I have it now, after you convert something, if you choose not to make another conversion, it
-
How to assigned SHD0 Variants to user?
Dear All, I want to use SHD0 to hide the u2018DO not Display Valuesu2019 in MB52 .Now I used SHD0 to do it. My step is: 1. Created Transaction Variants:ZMB52_T and Screen Variants ZMB52_S 2. Created Tcode: ZMB52, Created Variant Groups G