Why am i unable to enter data into an aarp crossword puzzle?

the crossword cell is ready to accept a character but a letter I enter does not show up in the cell

Apple performs all service on iPhones.

Similar Messages

Why would entering data into a basic form be so slow?

We have a form created in Acrobat 8.0 that has about 30 fields. They are only fields to be filled in and then the form is printed.
Until we updated Adobe Reader to version 9.1.1, we had no issues entering data into the form. With versions 9.1.1 and above, data entry gets slower and slower as you move down the form.
Entering data into the first part of the form is rapid. When entering data into the middle part of the form, you can type characters and then watch as the characters slowly appear. When you get to the end of the form. the characters you type can take about 5 seconds each befor they appear.
Can't figure out why version 9.1.1 and higher cause data entry to get progressively slower as you move down the form.

Hi,
I realize that you mentioned that it worked in 9.1, so perhaps the problem is not related to RDP performance. However, you still might want to have a look at Ericom Blaze, a software product that accelerates and compresses standard Microsoft RDP. Blaze accelerates RDP performance by as much as 10-25 times, and helps deliver higher frame rates and reduce screen freezes and choppiness.
You can read more about Blaze at:
http://www.ericom.com/ericom_blaze.asp?URL_ID=708
Or view a video demo at:
http://www.ericom.com/blaze_youtube.asp?URL_ID=708
Hope this helps.
Adam
Ericom

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup.

I am unable to enter data in a Google sheet via iPad.

I am unable to enter data in a Google sheet on my iPad.
The admin on the sheet says it's open to anyone with the link.
I can enter from my iMac but not from my iPad (current ios.)
What am I doing wrong?

It had occurred to me that the old shutdown/restart routine can cure a multitude of problems. That's what I did and it took care of all of the problems in all my Numbers documents.

I have manually inputted data into a blank spreadsheet and would like to use a form to enter data into that sheet !!! How do I do that please

I have manually inputted data into a blank spreadsheet and would like to use a form to enter data into that sheet !!! How do I do that please

Leigh,
After creating your table, Tap the Tab marked "+" and select "Form" - you will be asked which table to use. (You should get into the habit of naming your tables - if the table name isn't visible, select the table and tap the Styles (Brush) Menu > Table > Turn ON table Name, then double tap on the Table to edit it.)
Select the table you wish to to fill with a form and you will see a new form based on the header data.
The form will allow you to add one row at a time and when you get to the last row, there is an option at the bottom of the form to add a new row using the "+" button. At the top of the form is the row header which you can rename by double tapping.
You can also rename the form on the Tab by double tapping on the name.
Try it out.

Is there a way to enter data into a numbers cell on the screen directly, no keypad?

Is there a way to enter data into a numbers cell on the screen directly, no keypad?
Using a stylus or finger?

No. You have to use the built-in keyboard or a bluetooth connected external keyboard.
 Cheers, Tom

Unable to write data into excel file when it's close

Hi,
I'm facing this problem and it's a bit weird. I'm using the following method to insert data into excel file. But when excel file is close, it unable to write data into the excel sheet. But it was able to write the data into the excel sheet if i open the excel file when running the program.
Can anyone please tell me what's wrong to the code?
public int updateLog(String sheet, String no, String cpId, String CatId, String rbtCode, String rbt, String rbtName, String artistName, String price, String rbtFileName, String songId, String msg){
        int result = -1;
        try{
            SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss",Locale.ENGLISH);
            String actionDate = formatter.format(new Date());
            rbtName = rbtName.replaceAll("'", "''");
            artistName = artistName.replaceAll("'", "");
            String sql = "insert into [Sheet3$] (Code, CpID, CategoryID, RBTCode, RBT, RBTName, ArtistName, Price, RBTFileName, SongID, UploadStatus, FileUploadedDateTime) ";
            sql = sql + " values ('" + no + "', '" + cpId + "', '" + CatId + "', '" + rbtCode + "', '" + rbt + "', '" + rbtName + "', '" + artistName + "', '" + price + "', '" + rbtFileName + "', '" + songId + "', '" + msg + "', '" + actionDate + "')";
            System.out.println(sql);
            log.writeLog(sql);
            result = stmnt.executeUpdate(sql);
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
        return result;
    public int openConnection(){
        int result = -1;
        try{
            Class.forName(dbDriver);
            c = DriverManager.getConnection(conStr + excelFilePath+";ReadOnly=0;");
            stmnt = c.createStatement();
        } catch(Exception e){
            e.printStackTrace();
            log.printStackTrace(e);
            return -1;
        return 1;
    }Thanks

HI,
i hv a doubt regarding reading / opening of a
password protected Excel file using jxl( java ) .
How to read / open a password protected Excel file
thro Java (jxl ) program .plz let me know some
example also .
Regards,
Ramesh P
845935822cross posting !! answered here
http://forum.java.sun.com/thread.jspa?threadID=710466&messageID=9507085#9507085

What is the transaction code to enter data into mkpf table

Hi,
I want to enter data into mkpf table but through a transaction code.
What is the transaction code?
Thanks.
deniz.

Hi,
Go to SE16N transaction code.
Now you enter the table name ex: u201CMKPF u201C, if u wants to insert the values.
in Command bar
you enter the transaction code u201C &SAP_EDIT u201D.
Press enter.
Then click on execute button.
Now here I would like to change some data.
Here we can do any operation in application tool bar.
Enter values
And click on save button.
Regards,
Sujit

Numeric Keypad does not enter data into Excel

Is there a way to turn on/off the numeric keypad for the imac intel based apple computer when using Microsoft Excel?
I want to enter numeric data into the cells of a spreadsheet in the Excel program, but I can not figure out how to get the numeric keypad to work to do this. It will only work as a directional keypad, moving the active cell left or right, or shoot to the end of the spreadsheet. Consequently I forced to use the use the row of numbers above the keyboard (which is also the row of numbers below the function keys) to enter data.
Strangely, the numeric keypad will enter data with other programs, such as Word or when entering data into an online page.
I have searched Apple help without success.

Make sure that NumLock has not been engaged. To toggle that on and off, press Shift-Clear ("Clear" is the key immediately above the 7 on the keypad).

Entering Data into AppleTV

It is unbelievably frustrating to enter Data ( Passwords, network settings) into AppleTv. Has anyone found a way around this? I cannot understand why data cannot be entered like any other client on a network...make it hardwired only...(that should solve security issues).
I have now spent about 5 hours trying to figure out what is going on and reentering data...very frustrating!!!
How do we leave feedback for Apple?

Brett Grossmann wrote:
done once and then you are off to the races.
Yes...that is what I thought until I had to change some settings. With static IP addresses and WPA2 security ( I try to take Apple at it's word that they are security conscious) there should be a better way of inputting data like this...besides...if it is easier to change it encourages users to make security a concern and change things every now and again...is this not what the gurus of the net suggest in any case? I will not stop loving Apple...but every now and again they have just not thought things through.

Cannot enter data into table with column named DATE

I have a table as follows:
CREATE TABLE PACKINGLINE (
SNO VARCHAR2(13),
"DATE" DATE DEFAULT SYSDATE,
PRDORDNO VARCHAR2(12),
NOW DATE DEFAULT SYSDATE,
CONSTRAINT PACKINGLINE_PK PRIMARY KEY ("SNO", "DATE"));
Note the "cleaverly" named DATE and NOW columns (yes, that is the name of the column... our company was bessed with a very clear SQL server DBA in the past)
This SQL statement works:
INSERT INTO PACKINGLINE (SNO, PRDORDNO) VALUES ('1000808972', '100080897');
However when I try use SQL Developer as follows I cannot enter data:
1. Open SQL Developer
2. Click on "Tables" then on my table named PACKINGLINE
3. Click the "Data" tab
4. Click the [+] "Insert Row" Icon
5. Enter the same data as above
6. Click Commit
7. The following error is shown in the log window and I cannot commit the data change.
Error message
==================
INSERT INTO "DBO"."PACKINGLINE" (SNO, PRDORDNO) VALUES ('1000808971', '100080897')
One error saving changes to table "DBO"."PACKINGLINE":
Row 5: ORA-06550: Row 1、Column 25:
PL/SQL: ORA-06552: PL/SQL: Compilation unit analysis terminated
ORA-06553: PLS-320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: Row 1、Column 7:
PL/SQL: SQL Statement ignored
==================
I can copy and paste the above query into a normal SQL statement window and the data commits fine.

Its so flaky there really must be something wrong Mr Adobe support person....
If I load a PDF, do nothing, gently save it, reopen and then waiting for my trial dialogue to wake up so that I can click on continue trial... then save as extended reader blah.... then close. I have finally saved one that works!!!! but how difficult is that????
WHAT IS WRONG ADOBE??

System does not allow to enter data into cube

Hello
I use BPS NW2004s. I created a layout and execute "enter plan data". I realized that system does not allow me to enter data. Why?
Alex

I guess your cube is not transactional. Try to switch it to transactional

Two fields, two scripts. User can enter data into field 1 or 2

Hi all,
New here, and to acrobat forms, so please bear with me!
What I'm trying to achieve is a form that calculates total invoice value, based on a total number of hours worked, and a rate. The user fills in the total hours, but then the problem is that some people know their fixed rate, and others have a changing rate. Those with a changing rate simply know the amount they are invoicing for. What I'd like, is a way for the TotalInvoice value to be calculated by Rate*TotalHours when the user enters a value into the Rate field... OR ... for Rate to be calculated by TotalInvoice/TotalHours when the user enters a value into the TotalInvoice field.
I can make it go one way or the other (so the script is only in TotalInvoice field or the Rate field), but I can't manage to get it to go both ways. Is this possible?
To summarise: User can enter manually into Field1 and value of Field2 is calculated, or user can enter manually into Field2 and Field1 is calculated.
Thanks!

What you propose can be difficult, becuase you're describing a circular reference between the two fields. When the 1st value changes, you want the 2nd value to be calculated based on the 1st value. But when the 2nd value changes, you want the 1st value to be calculated based on the 2nd, ad infinitum. There are ways to short-circuit the loop, but it depends on whether you need to do the calculation only when there is manual entry, or whether you need it to work when either field value changes programmatically or by importing form data.
Sometimes it's just easier to have the user press a button to calculate and set the other field value.

Entering data into Reports-WebDB2.2

Hi,
I am trying to enter html into the add text section ("Help Text")of the report. However, the information that i am entering is defaulting to the centre when it is being displayed. i have tried adding html tags <Align> to align the data to the left side of the page., However it does not seem to be recognising it.
Any advice?
Thank you

Let's make this simple:
a) Your book seems to assume you're doing development remotely.
b) You are not doing development remotely.
c) Therefore, you shouldn't follow every step listed in your book (i.e. ignore the stuff about Telnet).
Assuming you installed mySQL in the standard location, you can use this batch file to start mySQL on your machine:
@echo on
cd c:\mysql\bin
mysqld
@echo off
cls
Use this batch file to shut down mySQL:
@echo on
cd c:\mysql\bin
mysqladmin shutdown
@echo off
cls
You can play around without a login or password in development. For a production environment, you're going to need to set up users and grant permissions.
Spend some time reading the mySQL documentation.

Flash movie to enter data into access

I have a simple microsoft access database (table with a handful of fields).
I want to make a flash form that operators can use on mac and pc to enter information into the database.
I know little about databases and although I've worked as a designer with flash for years, i know little about the latest scripting too.
Is there a simple way to do this?
Thanks in advance for any comments

The answer is sort of.
Flash that is served up from a webserver cannot access a database directly with out some back end server that actually does the hand shaking.
There are a number of ways to do it though.
1. Create webservices to pass the data to and have the webservices access and save the data for you.
2. Use page scripting with .NET aspx pages or PHP pages deployed on your webserver to communicate to the database. You would use the loadvars or URLLoader in AS3 to post the variables to the page and then let the page process the data.
Those would be the simpler methods providing you have access to a PHP or .NET solution to act as your backend.

Why am i unable to enter data into an aarp crossword puzzle?

Similar Messages

Maybe you are looking for