Why am I unable to select the boolean indicators on my front panel?

Hello all,
This has to be an easy one for you guys, but here goes...
I created a front panel with approximately 20 boolean indicators on it (LEDs). I realized that I only had 10 functional, so I made the others 'greyed out and disabled'. Well, now the ones I disabled are functional again, so I want to enable them. Problem is, when I go to the diagram and select 'show indicator' it is still grayed out. I cannot click on the indicator on the front panel to 'enable' the indicators. I cannot select them at all.
I've tried creating property nodes and enabling them that way. They are no longer grayed out when I do this, but I still cannot click on them to move them about the front panel.
All
I want to do is select them so I can rearrange the way they look on the panel, but I cannot click on them.
And, yes, I've had my tool palete on both 'Automatic Tool Selection' and 'Position/Size/Select'. It is also interesting that I can select and move the indicators which I never disabled in the first place.
Any help would be great!
Thanks in advance,
Dave Neumann
[email protected]

"Neumannium" wrote in message
news:[email protected]..
> Paul,
>
> Part of the problem is that I cannot click on them at all. If I try
> to right click, the Controls palette pops up (like it would if there's
> nothing on the front panel).
>
> If I drag a box around them, they are not selected. It's as if they
> don't exist, but they do! They still function -- I can still run the
> test and the booleans react as they should, but they are not where I
> want them to be (the user cannot see them all without scrolling).
What happens if you go to the diagram and double click on the control? It
should take you to the front panel and highlight/select the control.

Similar Messages

  • Boot Camp to install windows, unable to select the checkbox

    Hello,
    I recently purchased windows 8 64bit on a dvd and I'm trying to install it using Boot Camp Assistance on my Macbook Pro (early 2011). However, the second option is greyed out and I cannot select it.
    I already downloaded the latest support software and I'm not sure why I'm unable to select the second option "Install or remove Windows 7 or later version"
    Please Help

    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         439.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:                  Apple_HFS Backup                  59.9 GB    disk0s4
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *438.9 GB   disk1
                                     Logical Volume on disk0s2
                                     Unencrypted
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                            IR3_CCSA_X64FRE_EN-... *4.1 GB     disk2
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *16.4 GB    disk3
       1:                 DOS_FAT_32 UNTITLED                16.4 GB    disk3s1
    /dev/disk4
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                            Boot Camp              *1.4 GB     disk4
    Abdullas-MacBook-Pro:~ 3bdulla3moodi$
    Name:         Macintosh HD
        Status:       Online
        Size:         439248101376 B (439.2 GB)
        Free Space:   18882560 B (18.9 MB)
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     439248101376 B (439.2 GB)
            Encryption Status:       Unlocked
            Encryption Type:         None
            Conversion Status:       NoConversion
            Conversion Direction:    -none-
            Has Encrypted Extents:   No
            Fully Secure:            No
            Passphrase Required:     No
                Disk:                  disk1
                Status:                Online
                Size (Total):          438876897280 B (438.9 GB)
                Conversion Progress:   -none-
                Revertible:            Yes (no decryption required)
                LV Name:               Macintosh HD

  • Why i am unable to select between 2 anchor points with in a object while dragging with direct select

    why i am unable to select between 2 anchor points with in a object while dragging with direct selection tool instead it moves

    Another option is to temporarily change your view to outline mode, when your done switch back to preview mode. Ctrl-Y or View>Outline {View>Preview} The menu option will change depending on which mode you are in.
    And another option, double click on the object in question to place it in Isolation mode. You can now edit to your hearts content. When done, click on the gray border at top of document.
    So as you can see there are multiple ways of accomplishing the same thing.

  • Can anyone tell me why I am unable to apply  the txt animation in Elements 10?

    Can anyone tell me why I am unable to apply  the txt animation in Elements 10?  The "apply button" doesnt engage allow it to be selected?
    Would love some help?
    Darrell.

    Dazza - wildvision
    Are you applying text animation
    a. to Default Still text
    and
    b. a single line of text
    If you do not do the above text animation fails. Please check out my blog post for details.
    http://www.atr935.blogspot.com/2013/07/pe-titler-part-1-text-animations.html
    Please review the above. If any questions or clarification needed, please do not hesitate to ask.
    Thanks.
    ATR

  • Unable to select the value from a list item in forms 6i

    Hi ,
    I'am using forms 6i. I have created a list item in my form as below.
    Item_type = list item
    list style - popup list
    elements in list - A, B, C,D
    When I open the form all the above values are displayed for the list item. But I'am unable to select the item( either A,B,C,D).
    Please let me know if I need to add any thing else programatically to acheive this. The block on whixh these values are diplayed is a datablock.
    This is very urgent. Any suggestions would be of great help.
    Thanks
    Deepthi

    If you have a list item where you have:
    Display A value 1
    Display B value 2
    Display C value 3
    Display D value 4
    If want to initial the value of the item to be A, you can set the initial value of the item to 1 in the property pane.
    Otherwise in an initialisation triger have
    :block.list_item := 1;
    HTH
    Tony

  • Unable to select the operation mapping in Enhanced RD?

    Hi Guys,
    I am unable to select the operation mapping in the Enhanced Receiver determination in PI 7.1.  Looks like a bug in PI 7.1.  Did anybody else faced the same problem and got any resolution.
    any help would be appreciated
    Thanks,
    Srini

    Looks like a bug in PI 7.1
    Not a Bug but it seems to be a restriction......have a read of the below help section:
    http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/94467db1746003e10000000a1553f6/content.htm
    From above help section:
    During the definition of the interface mapping, you assign the abstract service interface ReceiverDetermination as the target
    interface. The service interface ReceiverDetermination is in the Enterprise Services Repository in the software component SAP
    BASIS (namespace http://sap.com/xi/XI/System).
    You will notice the same behavior when you try to select the Operation Mapping in Extended RD....click on the input help....pop-window will appear....what are the source and target SI that you see?
    Regards,
    Abhishek.

  • Entity Framework -  unable to select the oracle data connection

    Entity Framework - unable to select the oracle data connection from the wizard that allows you to select the data provider. Even though we successfully added a data connection that points to an oracle database, we still can't select an existing data connection or create a new database provider that points to an oracle instance.
    we are using both vs 2008 sp1 and vs 2010. We connect to oracle 11g and we use the latest oracle odp.net driver. the Driver is installed and working in vs studio.

    I had this exact problem when I started. I think I had downloaded the wrong odbc (the 64x version). When I unloaded that version and downloaded the 32bit version it worked.
    Hope that helps. ~ Darla

  • Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix?  Is it possible to delete the default track after having rendered a mix?

    Why am I unable to delete the default track (which seems to act as the master, right?) after making a rough mix?  Is it possible to delete the default track after having rendered a mix?  I did a rough mix and now cannot change the song as the tracks that were a part of the rough mix seem to remain in the song even though I mute the tracks for a new mix.  For instance, I played and recorded a different bass line.  Muted the original, but when trying to create the new mix I can hear the original bass line even though I have muted that track.  It seems to remain in the previous master (default) track.  Please send help.  Thank you.

    Before answering your question, you have to make sure you understand the difference between the different track types in GarageBand.
    Tracks, you record your music on
    There are three types of those Tracks.
    MIDI Tracks (aka Software Instrument Tracks)
    Audio Tracks (aka Real Instrument Tracks)
    Drummer Track (only one per Project)
    Global Tracks
    These are the Tracks that can be shown/hidden at the top of the Tracks Area for specific purposes.
    Arrangement Track
    Movie Track
    Transposition Track
    Tempo Track
    Master Track
    This Track can also be shown/hidden in the Tracks Area. Please note, you cannot delete that Track, only hide it, similar to the Global Tracks
    Regarding the Tracks you record your music on,  you can delete any of those. It doesn't matter if you created them or there are part of a Template (maybe that  is what you refer to as the default track). Once you delete the last Track, the "New Track Window" will pop up to add a new track.
    I will explain all that in much more detail in my manual "GarageBand X - How it Works".
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • HT201303 Why am I unable to use the apple store card  I purchased to purchase a movie or anything else from the iTunes app store???

    WHY AM I UNABLE TO USE THE APPLE STORE CARD I PURCHASED  FROM BEST BUY TO BUY A MOVIE OR ANYTHING ELSE FROM ITUNES OR THE APPLE STORE/

    Apple store gift cards and iTunes gift cards are not interchangeble. They have to be used for the store in which they were purchased.

  • Why am I unable to select layers within the layout window - PSE13

    I am working on a project in expert mode. It has several layers. Randomly, I am now unable to select any of the layers within the layout window. I have tried to drag or click on or over an element and nothing happens, it keeps selecting the same element unless I select it from the layers utility on the right hand side. I have tried this with a mouse and a Wacom tablet, same result.

    Fixed by running updates, resetting preferences and rebooting. Phew!

  • Why am I unable to sort the music on my iPhone 4S when viewing it in iTunes?

    Hello,
    Apologies if this has been answered already; I searched for it but none of the results appeared relevent to my issue.
    I have an ipod touch 4th generation, which I manually manage from the the iTunes library on my home PC (Windows 7, 32bit). I am able to plug the ipod touch into my work laptop, to listen to the music on it through iTunes. I can see the list of songs on my ipod via the 'Music' tab of the 'Devices' section in iTunes. In that view, I am also able to sort the list as I see fit, by clicking on the various column headings to change the order of that column appropriately.
    I have recently purchased an iPhone 4S, and loaded it with music from my own computer's iTunes library in the same way I did for my ipod. However, when viewing the songs on my 4S on my work laptop in the same way as above, I am unable to sort the view at all. Why is this?
    It's annoying not being able to sort the songs in an order different to how they were sorted on the parent machine. For example, if I'm looking in my song list for a song I added recently, I was able to find them on my ipod by simply ordering the list by Date Added or Date Modified, but there seems to be no way of doing this for the 4S?
    Thanks in advance.

    Thanks for your message.
    I have downloaded the latest iTunes [11.1.5 (5)] with no luck, unfortunately. As it did with 11.1.4 (62), iTunes recognizes my iPhone, I can select the music to sync, click sync, it appears to sync but remains completely unchanged in my iPhone music.
    Any tips are welcome!

  • When I attempt to erase my hard drive, I am unable to select the "security options" tab?

    I wish to erase my hard drive and for the contents of the hard drive to be unrecoverable. In order to do this, I have done some research and I believe there is a tab called "security options" when I go into "Disk Utility" and click "Macintosh HD." This tab is indeed there for me, however, I am unable to click it. What I mean by this is basically when an option is there but you simply cannot click it because... well, yeah, that's exactly my problem! I don't know why I'm unable to click it.
    Thanks in advance!
    Message was edited by: RyanValmont

    Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions. Then select the Erase tab. Format is Mac OS Extended (Journaled). Select Secure at the level you want. Erase and then reinstall the OS.
    OS X Recovery
    OS X Recovery (2)

  • Unable to select the created Ports(greyed out) in the import manager

    Hi ,
    We have created some ports with specific Remote system and XML schema's and also assigned the map to it.
    The processing type is manual for now,since we want to load data manually using import manager from the Ready folder of the port since PI is dropping the files there.But when I load import manager and select the file type as "Port" and also the relevant remote system ,I cannot select any of the list of ports created ,All are greyed out.
    All I need is to select "Port" option ,remote system and use the created port from the dropdown list of import manager " connect to source" step,which i am unable to select as  all the port s are greyed out and unable to select.
    Any help greatly appreciated...

    Hello Arvind,
    There is no need to start the MDIS (Import server) if you are importing the data manually.you just open the import manager, login into the repository and select type as XML as per your case and select the remote system (it depends on your requirement) and select the port on which your xml files resides.and enter in the import manager then map you data accordingly and you can import into the repository.
    when you want to automate the process for importing the data in repository then you will need to Start the import Server. In that case import server automatically pick the file from the ready port folder and also set the property in console as the processing type is Automatic.
    Hope this will help you and clear your doubt.
    TNR,
    Saurabh...
    Reward if found helpful.

  • Why i am unable to catch the 'TAB' key press?

    hi
    i have an application where i have 2 text fields and one button in order say t1, t2 and b1.
    on tabbing t1 cursor moves to t2 and on tabbing t2 cursor moves to b1 and on tabbing b1 cursor moves to t1.
    now when i press tab button on any of the component i have written a keyListener for that to catch 'TAB' key using the comparision
    if( e.getKeyCode() == KeyEvent.VK_TAB )
    but its not catching the tab key pressed on any of these 3 components....
    why like this...
    i want to catch the press of 'TAB' key and write some action for it... but unable to catch the 'TAB' key press.
    anyone could help me in this....
    thanx in advance,
    -Soni

    I seem to remember this question being asked before. I think the answer was that the FocusManager intercepts the TAB key. I don't remember the solution but you can try searching the forum.

  • Why am I unable to use the Adobe Send application

    I am unable to fill in forms, add text or send a form, whereas I used to be able to do this.  I have an Adobe Account with a User ID and password.  Isn't Adobe a Certified Document Service?

    mspacmn wrote:
    Am I unable to use the text messaging feature on my 2014 Honda CRV with my Iphone 6?
    Yes, you are unable to use text messaging feature with your iPhone.
    -> http://owners.honda.com/vehicles/information/2014/CR-V/features/SMS-Text-Message -Function/3
    "The system is currently compatible with select Blackberry® phones with Bluetooth"

Maybe you are looking for

  • Can't add songs to iTunes after upgrade to OSX Lion

    Hi, I have a problem since I updated my system to OSX Lion. While updating I migrated my iTunes library to my new system. I have a custom location of my music library on HD/DATA/MUZIEK. My library in iTunes is playable but I cannot add any songs to i

  • Item not relevant for Billing but still exist in Billing due list VF04

    Hi Experts, I am experiencing an issue where this is an STO scenario. The PO->DN->PGI->GR (Receiving plant) where there is no invoice required as its with the same company. However, I can see there is one Delivery still getting reflected in VF04 due

  • Line graph repeated values

    Hi, i have ploted the line graph which is like this select null,week_ending_date,effort from dual; Here the line is ploted but the labels are repeated eg: if the report is like this Weekending_date effort 12-sep-08 8 12-sep-08 9 14-sep-08 10 15-sep-0

  • Administrator Password

    I installed service pack 2 on Windows XP on my Satellite pro M-30 and no I cant get to start Windows again. I have tried everything, also to repair Windows but it ask for the Administrator password. I have used the one I had but it don't work and I h

  • Html link problem...

    Hey! Just wanned to say to those who answered my post on html link problems, that the problems I had were actualy because of the jdk version! I had jdk1.2 and now I have 1.3 and it works just fine. thanx a lot to everyone who tried to help!!!