Why an insert journal concurrent works for one app user and not for other?

We have two app users. User A and User B. They have same responsibilities and grants over same functions and menus. When they run  a custom insert journal concurrent, only user A can execute it successfully.
User B uses same parameters and data  as User A, but when User B  runs concurrent, it  always  fails
What is the difference between this users?
How we can check this difference?

Hi,
did you check user specific profile option settings as well?
In addition, it would be helpful to have some more input
regarding the error which is raised when user B runs the
concurrent (concurrent log file output).
Regards

Similar Messages

  • Cash Discount Calculated for One Line Item and not for Other

    Hi All,
    We have devloped a Z program which is used to Write of InterCompany AR and AP recon Account to another GL Account. In this program to clear line item we have created a BDC which calls t-code FB05. Thsi program is running perfectly fine for all company codes.
    There is new company code SG20 for which it is not clearing the line items. It has created a Session in SM35, when we analysed the seesin we found that for some line items system is calculating Cash Discount and for some other line items it is not but the payment Term is same for all the douments with 3% 14days.
    I need your help in understanding that why for some line items system calculates the Cash Discout where as for others it is not calculation..also the Posting Date is same for all the documents.
    Please advise what could be the reson for this.
    Thanks!
    Regards,
    VIvek Srivastava

    Hi
    Cash discount is calculated based on the combination of baseline date and payment term conditions.
    Hence please check the baseline date for all the documents, in which the cash discount is not appearing.
    In your case, the possible reasons could be that 1) baseline date is different between these documents or 2) payment terms cash % is manually modified in the line item of the documents.
    Regards

  • Can a CR work only for one aggregation level and not other ?

    Hi Experts,
    I have a real time infocube (RTIC) over which there is a multiprovider, on top of which I have built 2 aggregation levels.
    There are sequence of 2 characteristic relationships (CR's based on exit class) defined for the same RTIC.
    Is it possible that the CR's be functional for one aggregation level and not in case of second aggregation level ?
    Thanks and Regards,
    Pankaj

    Additionally let me explain the scenario in more detail:
    The difference between 2 mentioned aggr levels is that of 0CALMONTH which is checked in second aggr level.
    0CALMONTH is assigned as target char in first CR, hence both the CRu2019s work for input ready report built on first aggregation level and do not function with input ready report built over second aggregation level.
    Therefore I wish to skip the complete execution of CRu2019s for I-R reports based on 2nd aggregation level.
    As CR of type with derivation is functional only if the target char selected is not present in the aggregation level.
    Please let me know if any more details are required.
    Thanks,
    Pankaj

  • Dunning form F150- Telefon/fax/mail printing for 1 user and not for other

    Hello expert,
    This is regarding the printing of the dunning form using F150. 
    At first, using company code and account clerk (BUSAB), we retrieve the user id.  The program uses FM BAPI_USER_GET_DETAIL to get the address details of this user id.  The user name, telephone and fax adn email are printed in the dunning form (1st reminder, 2nd reminder and so on).  The problem here is , the address details are printed on the form for one user and not for the other user who is processing.  Any idea regarding this.  Do I need to give any user setting parameter in SU01 or is there any authoriztaion issue which is blocking this.  Awaiting reply,
    Cheers,
    Bala

    I'm having the same problem with Exchange 2003, I can get it to work with Entourage and on my iPhone, but it keeps rejecting my password on Mail.app. If I keep entering the password it starts to update with server, but it won't save the password. IMAP is on for my account which is how it works on iPhone.
    I'm starting to think it has something to do with Keychain Access or Mail.app and not so much Exchange Server. If anyone has found a solution please let me know,
    Thanks

  • How could I set the proxy settings for just some URLs and not for all?

    Hello,
    I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security.
    I know that I can set the proxy settings in the system properties, and this works perfect.
    But I don't want to set the proxy settings in the system properties, because this proxy settings will be for ALL the URLs, and I just want for a few URLs.
    How could I set the proxy settings for just some URLs and not for all?
    Thanks

    java.net.URL.openConnection(java.net.Proxy proxy)
    @since 1.5

  • CL_WD_RUNTIME_SERVICES= ATTACH_FILE_TO_RESPONSE( ) works in one system but does not in other

    Hi folks,
    We are facing an issue here with a custom web dynpro application that export an excel. The following piece of code has been written in this application to export an excel:
    cl_wd_runtime_services=>attach_file_to_response(
           EXPORTING
             i_filename      = c_filename
             i_content       = xtext
             i_mime_type     = c_mimetype
             i_in_new_window = abap_false
             i_inplace       = abap_false ).
    Now, the issue is this - it works fine in one system but does not in other system. HttpWatch shows ERROR_HTTP_INVALID_SERVER_RESPONSE in the system where it does not work. Any ideas?
    Regards,
    Shiromani

    Hi Shiromani,
    You mean "Other System" is other PC. If so, it seems that there is an issue with browser
    Please check the below SAP note
    1679126 - Server sends timeouts that cannot be reproduced
    Also, compare the browsers versions in both systems.
    Regards,
    Rama

  • SetText() works for one text area but not for another

    I am student new to java so forgive me if I'm making an obvious mistake. I have a GUI with 3 tabs. Two tabs have a text area in each in them and an action listener tells the textarea what to print. The problem is one text area works and the other doesn't. they are declared in the same way so I can't see why the problem occurs.

    If you have copied and pasted code for the second one, it is possible that you are setting text for the first text area at both the places. Check if you are calling the setText method on both the text areas and not the same one twice.

  • Hi. I payed for one year memberchip and used for a few months. Now it was expired, but i dont know why. I dont want to continue as a memberchip anymore but i want understand what repend and knowig if i still have to pay something.

    My memberchip was canceled?

    I have a same problem i think and i want to cancel my subscription.. I was paying for almost a year and now when i log in to my account it doesn't show me any subscription but i'm still getting emails from Adobe that they successfully  charged me for each month.
    I want to cancel all this and it's impossible..

  • Caching service only works for OS X updates and not for Apps

    Hello,
    It seems that my OS X Server Caching service only works for Apple OS X Software Updates (in Mac App Store updates, when the icon of Mountain Lion appears). I see it in my logs in verbose mode when I download an Apple OS X Software Updates and not when I download an app in Mac Appstore.
    So I'm sure my Caching service works but not for all downloads.
    Why ? What's wrong with my server ?
    I read in some blogs that Caching Server can work for iOS devices appstore too. I try to download some apps with my iphone but nothing happens in logs ...
    Can somebody help me about the Caching Server ?
    Thank you.

    I am with chugues http://www.apple.com/ios/business/
    Caching Server 2 supports iOS 7.
    By caching purchased content and software updates on a local Mac running OS X Mavericks Server, Caching Server 2 speeds up the download and delivery of content through the App Store, Mac App Store, iTunes Store and iBookstore. Your users get faster downloads of content and updates to their iOS devices directly over your corporate network.
    Shows iOS updates and et al. Why is this feature not on yet?

  • HT2731 I have 2 apple iPods on the same account, And they have the Same songs on them. How can I get a new account for one of them but not the other? Can I wipe the memory of 1? How would I do that?

    I have 2 iPods one I don't use anymore. I would like to make a new account for one but not the other. Is that possible? If I wipe the memory in one will the other wipe out too? How can I do all of this?

    You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
    You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

  • Change pointer triggers for one order type but not for other with LOIPRO

    Hi all,
    We have old production order type ZP01 since last 3 years. Idoc LOIPRO are triggered properly. Now we introduced new production order type ZP02, but idocs are not triggereing for these prod. orders. They both are production orders with different order types but same message type LOIPRO
    I noticed that change pointers are not getting written to CDHDR and CDPOS for this new order type. For old order type they are getting written to CDHDR/CDPOS. Does any one know where is the issue in config.
    Currently BD52 contains following entries for LOIPRO
    ORDER-AFKO-AUFNR
    ORDER-AFKO-KEY.
    Thanks in advance

    Anyone with an idea.
    The project went live by using RCCLORD or RCCLTRAN, but still the same orders keep triggering. How do we restrict the already processed production orders.

  • Why packets are being translated by one route-map and not the other?

    Hi,
    I have 2 NAT rules, each with a route-map to determine which packets are translated. What I don't understand is how to control which NAT rule is applied first..?
    In my config, the first of the following rules is applied first, and then the other. I would like to have it the other way round, the second being applied first, and the first being applied second.
    ip nat inside source route-map NAT_INTERNET_ACCESS_RMAP interface GigabitEthernet0/1 overload
    ip nat inside source static 172.16.101.1 10.10.11.1 route-map NAT_RADIANZ_PIXACCESS_RMAP
    The reason why I want it this way round is because the first rule NAT's almost everything so that I can access the Internet. The second rule NAT's specific traffic to a different address.
    If I want traffic to be NATTED according to the second rule, I have to deny traffic in the first associated ACL, and permit it in the second ACL. That means I basically have to configure each ACL each time I want packets to be matched by the second NAT rule - there must be a better way of doing it!!!
    Any help would be most appreciated.
    Many thanks,
    Michael.

    Hello, here's the basic (shortened list). If I want packets to be matched by NAT_RADIANZ_PIXACCESS_ACL I have to put a deny in NAT_INTERNET_ACCESS_ACL. If I could make sure that the first list is used first, and then anything left over compared against the second, then it would make life/editing much easier...
    Cheers,
    Michael
    ip nat inside source route-map NAT_INTERNET_ACCESS_RMAP interface GigabitEthernet0/1 overload
    ip nat inside source static udp 10.10.11.1 500 10.10.11.1 500 extendable
    ip nat inside source static udp 10.10.11.1 4500 10.10.11.1 4500 extendable
    ip nat inside source static 172.16.101.1 10.10.11.1 route-map NAT_RADIANZ_PIXACCESS_RMAP
    ip access-list extended NAT_INTERNET_ACCESS_ACL
    remark Traffic to Branch A (over VPN)
    deny ip 172.16.101.0 0.0.0.255 192.168.1.0 0.0.0.255
    remark Traffic to Branch B (over VPN)
    deny ip 172.16.101.0 0.0.0.255 172.16.0.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.1.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.2.0 0.0.0.255
    deny ip 172.16.101.0 0.0.0.255 172.16.3.0 0.0.0.255
    remark Traffic to Cust A (over VPN)
    deny ip host 172.16.101.1 host 192.168.0.1
    deny ip host 172.16.101.2 host 192.168.0.1
    remark Traffic to Cust B (over VPN)
    deny ip host 172.16.101.1 host 192.168.0.2
    deny ip host 172.16.101.2 host 192.168.0.2
    remark Traffic to Cust C (over Radianz VPN)
    deny ip host 172.16.101.1 host 192.168.0.3
    deny ip host 172.16.101.2 host 192.168.0.3
    remark Traffic to Cust D (over Radianz VPN)
    deny ip host 172.16.101.1 host 192.168.0.4
    deny ip host 172.16.101.2 host 192.168.0.4
    permit ip any any
    ip access-list extended NAT_RADIANZ_PIXACCESS_ACL
    remark Manangement Traffic to Cust C
    permit icmp host 172.16.101.1 host xxx.xxx.xxx.xxx
    permit icmp host 172.16.101.2 host xxx.xxx.xxx.xxx
    permit tcp host 172.16.101.1 host xxx.xxx.xxx.xxx eq 22
    permit tcp host 172.16.101.2 host xxx.xxx.xxx.xxx eq 22
    remark Manangement Traffic to Cust D
    permit icmp host 172.16.101.1 host xxx.xxx.xxx.xxx
    permit icmp host 172.16.101.2 host xxx.xxx.xxx.xxx
    permit tcp host 172.16.101.1 host xxx.xxx.xxx.xxx eq 22
    permit tcp host 172.16.101.2 host xxx.xxx.xxx.xxx eq 22
    route-map NAT_RADIANZ_PIXACCESS_RMAP permit 10
    match ip address NAT_RADIANZ_PIXACCESS_ACL
    set ip next-hop 10.10.11.14
    route-map NAT_INTERNET_ACCESS_RMAP permit 40
    match ip address NAT_INTERNET_ACCESS_ACL
    set ip next-hop xxx.xxx.xxx.xxx

  • Why global var can be initialized with a static method and not by other static global var declared after its usage

    Take this:
    class test
    static int i=j;
    static int j=10;
    this will give illegal forward reference ....
    but this will compile successfully ..
    class test
    static int i=test1();
    static test1()
    return 20;
    plz assume we have main method in both cases ..
    java would be loading all static members first and would be assigning default values .. and then will be running all the initializers from to bottom ..
    Why second case is a compile success and not first .. as in second also test1 method is declared after its usage ..
    Plz help.
    Thanks
    Abhishek Roshan

    Why second case is a compile success and not first .. as in second also test1 method is declared after its usage ..
    Because the implementors of Java intentionally chose to do it that way.
    There are TWO stages to the process: preparation (which occurs first) and initialization.
    See the Java Language Spec section 12.4.1 'When Initialization Occurs
    The intent is that a class or interface type has a set of initializers that put it in a consistent state, and that this state is the first state that is observed by other classes. The static initializers and class variable initializers are executed in textual order, and may not refer to class variables declared in the class whose declarations appear textually after the use, even though these class variables are in scope (§8.3.2.3). This restriction is designed to detect, at compile time, most circular or otherwise malformed initializations.
    Note the clause beginning 'may not refer to class variables'. And the authors give the reason for that restriction in the last sentence: detect circular initializations.
    Then if you check that referenced section 8.3.2.3 you will find this
    http://docs.oracle.com/javase/specs/jls/se7/html/jls-8.html#jls-8.3.2.3
    8.3.2.3. Restrictions on the use of Fields during Initialization
    The declaration of a member needs to appear textually before it is used only if the member is an instance (respectively static) field of a class or interface C and all of the following conditions hold:
      The usage occurs in an instance (respectively static) variable initializer of C or in an instance (respectively static) initializer of C.
      The usage is not on the left hand side of an assignment.
      The usage is via a simple name.
      C is the innermost class or interface enclosing the usage.
    When a method is used (your example 2) no circular initialization can occur because methods are not 'initialized'.

  • How do I use my I'd for the app store and not my wife.

    IT always ask for my wife password and I need it to ask for my password. So I need to change it so it will show my ID and not hers.

    Tap on the id in Settings > Store and log out of it and you can then log in with your account. But any apps (and other content) that were downloaded by your wife's account will remain tied to her account, so only her account will be able to download updates to her apps

  • PO approval hierarchy working on one user and not on other

    Hi all,
    I am using an approval hierarchy with one preparer and one approver for Purchase order and requisition.
    User A is preparer and User B approver.
    Requisition hierarchy is doing fine but the Purchase Order Hierarchy gives this error on forewarding the PO..:: " PO Approval Top Process : Error, Wait for Concurrent Programme"
    If i assign a different user to this Preparer, the process works fine.
    What am i doing worng or what issue am i over looking.
    Thanks in Advance.

    Found the solution.
    Apperently on this installation, my preset named RegularExport should be found with name [RegularExport].
    Strange that this works on on installation.

Maybe you are looking for