Why are all internal errors in HTMLDB ora-20001

Hi,
It seems that most of the custom errors in HTMLDB raise an ORA-20001. This makes it hard to search for solutions on the forum, as ORA-20001 returns a huge hit list. Wouldn't it be better to use more specific error numbers?
Thanks,
Steve

I concur

Similar Messages

CNS-9025 An internal error occurred. ORA-00904: EXTRA_COL: invalid ID

With our new version of Mobile Server (10.2.0.2) a lot of problems seem to have been solved. In older versions we didn't succeed in republishing. Meaning we had to drop the old version en publish a new version. Doing this meant we had to redo data subsetting for every user, which is a lengthy task. Besides it triggers full refresh for every user, that is a major one as well.
In the new version a lot goes better, but still we are experiencing some problems (or challenges).
Again the main issue is that in the course of time our application grows.
Now we stumble into the simple issue:
We want to add a column to our database.
What we do is the following (as described by Oracle):
- Add the column (EXTRA_COL) to our 'mother'database
- Alter the snapshot definition for this column (add the column)
- Republish...
When I resynch the new column appears on my client, so far so good.
However if I change something to the data on the client and I do a resynch I get:
"CNS-9025 An internal error occurred. ORA-00904: EXTRA_COL: invalid ID.
It seems as though 'internally' the column is not added everywhere it should be.
For example the CEQ$table does not have the EXTRA_COL column.
I'm quite sure that somebody else should encounter these problems as well as new views lead to data structure changes quite often.
Anybody encountering this as well, and more important, somebody got a clue on what is going on?
Thnx in advance.

There is a bug with 10.2 where the re-publish of a item that has has ddl changes (like an extra column) does not always work correctly. It seems to be intermittent (at least in our environment) and the symptoms are
alter base schema table
re-publish snapshot (note if the snapshot definition is the standard 'select * from ...' you should not need to do anything apart from republishing)
no errors reported in the re-publish
however the new column has not been added to either CEQ$object OR CFM$WTGPI_nnnnn (the inqueue table for the object) - the missing column on the CFM$ table is the source of the error shown above in the posting as there is a mismatch when the data is uploaded
dropping the publication item would fix the problem, but be aware if you have any users out there, when they synchronise any data being uploaded for a publication item that has been dropped and re-created will be LOST with no error being reported (in the sync history you will see a blank name in the upload section), due to the internal mapping having changed
We have found that normally when this happens forcing a republish of the affected object by making a change to the selection logic (eg adding something like 'id is not null') and republishing again fixes the problem - as with a lot of mobile issues, fiddle with it enough and it will eventiually sort itself out

Why are all my movies and tv shows now on my ipad with the icloud icon? How can i get rid of them?

Why are all my movies and tv shows from my library now on my ipad with the icloud icon? I have turned off all icloud related services. I have never used it. On top of that, my ipad now gets stuck on step 5 of the sync - waiting for changes to be applied and never finishes.
Help

Hi, go in Settings, under Videos turn off "Show all videos" this will remove the purchased videos to be displayed in the Video app. The same can be done with the music.
As for Step 5, connect you iPad and on the summary Tab, uncheck
"Sync only checked songs and videos". Then wait, it takes a while but this made it work for me after many restore attempts.
good luck

Why are all my pictures not on my ipad

Why are all my photos from my phone not on my iPad?

Very vague.
Did you put them there?

How to identify what are all the errors appears in process chain,

Hi all,
i have a process chain running, but i want to find out what are all the errors that the process chain has thrown
thanks
pooja

Hi Pooja,
Errors in monitoring:
SID error
Reason: If the corresponding master data is missing for the particular transaction data.
         1. Check for the load timing for the respective master data, if it less than an hour then make the request red and repeat the ip.
         2. If the data is loaded to PSA then you have to delete the request from target and manually push the data to from PSA.
         3. If we are required for selective update then note down the info source from header and find it in RSA1,select the one with Single as postfix.
         4. Goto data selection tab and change the range.
Tip: change the last 4 digits for from to 0000and the last 4 digit for to     9999.
        5. Repeat the ip.
         6. In case only of failure in one target goto RSA1 find the PSA, put he request no. and reschedule it.
Note: IF PSA is present never make the request red rather delete it.
Replication error
Reason: Data source replication Failed.
         1. In order to handle this error you should be known to IP, info source and source system.
         2. Goto RSA1, find the data source in the source sys tab.
         3. Right click on the data source and replicate it.
         4. Since all the transformation rules pertaining to this data source need to be reactivated so go to SE38 and execute rs_transtru_activat_all, data source and sys name.
         5. Delete the red request from the target.
Update R not supported
Reason: The corresponding initialization flag for the ip is lost.
         1. Goto header click on the ip and goto schedule tab and click initialize in the source system, whatever screen appears delete the only request present(the initialization flag).
         2. Goto RSA1, find the ip in the info source (one with the Adhoc initialize flag).
         3. Goto update tab and select Initialize delta process try going for with data transfer.
         4. Reschedule the IP.
Duplicate Record Error
Reason: Duplicate error records for the loaded master data.
         1. Goto info package via header or via RSA1.
         2. Goto processing tab and change the ip setting, selecting only PSA and ignore duplicate records and re run the ip.
         3. Do remember to change the ip settings back to the original once after the second step.
ODS activation failure
Reason: Prerequisites for ODs activation not satisfied i.e. unique key.
         1. Goto maintain variant.
         2. Check for the QM status of the requests in the target they should be green.
         3. Then click the ODS activation tab.
         4. In the screen which appears put the requests for which ODS activation failed.
         5. Activate these and keep on refreshing them until status reverts from green,
Remember to refresh these requests one at a time.
         6. If requests are red then delete them from target.
         7. Reschedule the IP.
Note: Never Try activating ODS manually if it is Y1.
Aggregate Rollup error
Reason: No aggregate found for the respective rollup.
         1. Click on the variant in which the error occurred.
         2. Goto chain tab and copy the variant and instance.
         3. Run the nestle provided program YBW05.
         4. Put in info in there and put the status as g green.
         5. Execute and refresh the status.
Lock issue
Reason: The same ip is been locked by other user or may be used by other process chain.
         1. We can see the locked entries and in the transaction SM12.
         2. Wait for the other process to get complete once the ip loads to target in that process then there is no need for running it for the process.
         3. In other case make the request red, when PSA is present then goto environment tab ->schedule->initiate update.
         4. In the box appears select update in the background.
         5. And the manually update the failed IPs by selecting manual update in the context menu.
Alfa confirming value error, Time conversion error, Chain didnt start, Delay due to long running job, Poor system performance,Heirarchy node exist in duplicate.
Reasons:
Alfa confirming error: Data format mismatch.
Time conversion error: Date, time format mismatch.
Chain didnt start: A scheduled chain didnt triggered at the prescribed timing.
-For all the above error we have to raise a ticket.
Idoc or TRFC error
Reason: An Idoc is been stuck somewhere.
         1. Reload the Master Data manually again from Info-package at RSA1.
         2. Release the Idoc.
         3. In the source system level got environment->transaction->Transaction RFC or Data ware housing level.
         4. In the Screen if the status is Transaction Recorded it means its stuck goto edit and click Execute LUW or press F6.
         5. If status is Transaction executing then it means its fine wait.
         6. Or raise ticket.
Error Due to short Dump
Reason: Error due to Short dump could be due to many reasons i.e. memory, table space, lock, error record, page allocation, failed change run.
Process terminated in the Source system.
           Reason: Sometimes we face that a load has failed due to job Termination at Source System.
      This happens due to unavailability of the source system or some connectivity problem between source and target systems.
1.      Make the request red.
2.      Delete the request from the data target.
3.      Reschedule the ip.
4.      If still the job fails raise the ticket.
And also check in following links:
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
For Data Load Errors check this blog:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Pls assign points if it helps u,
Thanks & Regards,
Madhu

Why are all paths in Clipping Masks and Compound Paths?

When I open up previous versions of Illustrator files (i.e. CS5), why are all of my paths messed up. Every object is embedded in a Clipping Mask, paths are compounded and in most cases type on a path is expanded into multiple non-editable objects. This causes complete redesign. This is terrible.

Because Illustrator accessed the PDF part of the file.
---> this points to corrupt files.
How were those files transferred to your computer? Are they on a server?
How old are they?
Which versions were they created in?
Did you already try to restart (the computer)?
Any plugins installed?

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

In iTunes under my device, under the apps tab, Why are all the options shaded out? I cannot make any changes, select any apps or do anything with the apps. I was able to load a few apps and sync but cannot sync anymore to my phone.

Hi,
( I search for iChat questions when I have finished in the iChat Forum)
So the menu bar reads iChat, File, Edit, View, Buddies, Video, Window and Help
There is no Buddy List open.
There is no other window for iChat open.
In the iChat Menu you only have access to Status.
Is an item ticked in the list ?
Is this a green (Available item) or Red ( an Away one) ?
Can you access the Accounts option ? (Sitll in the iChat Menu)
Is anything in here ticked ?
In the Window menu any Logged in account should appear in the list (Between the Next Chat and File Transfer items)
It would be useful to know which version of iChat this is.
If no account is ticked (iChat Menu > Accounts) or not showing in the Window Menu, plus you cannot determine the Status and you cannot access the Preferences then you need to access your Home Folder/Library/Preferences
As the Library in the Home Holder is Invisible in Lion you will need the Finder's Go Menu > Go to Folder option (you can use it in earlier OS versions if you want)
Type in:-
~/Library/Preferences
Find the file called com.apple.ichat.plist
Drag it to the Trash and Restart iChat.
This will lose all the settings in iChat that you have changed from Defaults but there is no way around this.
9:23 PM Saturday; August 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

What are all the errors that can be corrected by using tran code rsrv?

hi all,,
what are all the errors that can be corrected by using tran code rsrv?
can anyone list me out a list of errors that can be rectified using rsrv. And let me know the steps involved to rectify those errors using trns code rsrv.
regds
hari

Hi Kalyan,
I have urgent need of the RSRV DOCS.
Can you mail it to [email protected]
I will highly appreciate.
Thanks in Advance
SS
Points will be awarded

Why are all of my file icons appearing to be PDF files?

Why are All my icon for folders programs are adobe icons.I click on any I get the adobe page (linternet explorer, chrome program files)
Message was edited by: rapid7121

See http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

HT5557 Why are all my books that I have purchased no longer in my library?

Why are all my books that I have purchased no longer in my library?

The problem is, if I'm in an area that I don't have service or Wi-Fi and I want to read a book that I have purchased and paid for and I can't retrieve it...it is extremely annoying. I have paid A LOT of money for MANY MANY ebooks. I HAVE NOT DOWNLOADED THE NEW 7.0 SYSTEM BECAUSE I DO NOT LIKE IT. I HAVE IT ON MY IPHONE AND IT HAS TOTALLY SCREWED UP MY CALENDAR AND A FEW OTHER APPS. I DID NOT WANT THE CHANGES ON THE IPAD TOO. In other words, I have done nothing different. My Kindle app is working great and has twice to five times more e-books in it. The sad part is that iBooks charges more and does not get the new releases out as well and timely as Amazon. I use Amazon more often now but I do like to keep my series together and for that reason I of still use them occasionally.

Why are all my contacts suddenly 2 hours earlier than they were entered. I just noticed this today April 24

Why are all my entries on Icloud 2 hours earlier than they were previously entered. I just noticed this today April 23? They do not match what is on my Ipad or on my imac. Looks like the clocks are not syncronised someplace.

Your post is fascinating because your post header says "today April 24" while your post body says "today April 23" So maybe that is related...
Anyway, make sure all your iCloud devices have Settings > General > Date & Time > Set Automatically = "On".
Also, in iCloud.com, open Calendar, go to Preferences (upper right) > Advanced > and check "Enable Time Zone Support".

Why are all of my contacts duplicated on my iPhone/ipad with iCloud?

Why are all of my contacts duplicated on my iphone and ipad when using icloud?

One way this happens is when you previously synced contacts via iTunes/USB cable. If you haven't turned that off in iTunes, then you'll get duplicates from iTunes and iCloud.

Why are all disks being ejected from my MacBook Pro?

Why are all disks being ejected from my MacBook Pro?

Likely that your optical drive is either failing or has a dirty laser lens and cannot read the disks.....

HT3726 why are all of the templates in Spanish?

Why are all the templates and text in Spanish on Pages

It is Latin nonsense, placeholder text to show the layout. Click in a text box and start typing. Your text will replace it.
Regards,
Ian.

Why are all urls coming up invalid when I am connected to my wireless network?

Why are all urls coming up invalid when I am connected to my wireless network?

First back up the registry
Go to Start > Run --> type in regedit and hit OK.
Navigate to the key HKEY_CURRENT_USER\Software\Classes\LocalSettings\Software\Microsoft\Windows\CurrentVersion\TrayNotify.
Delete the values IconStreams and PastIconsStream.
Open up the Task Manager, go to the Processes tab, select explorer.exe and click End
Process.
Open the Applications tab and click New Task at the bottom-right of the window.
In the message box that pops up type in explorer.exe and hit OK.
Explorer.exe will reload, and the missing icons should now be back in the system-tray
where they belong.

Why are all internal errors in HTMLDB ora-20001

Similar Messages

Maybe you are looking for