Why are animated GIFs in Firefox 11 slow? I downgraded to Firefox 10 and the animated GIFs suddenly play fine again, so I am positive that the update messed up the playback delay of animated GIFs somewhere.

Self-explanatory. I am positive that the GIF I am viewing is faster than what it's supposed to be. I viewed the same animated GIF in another browser and it plays fine. It just plays slower in Firefox 11. I downgraded to Firefox 10 and the animated GIFs were fine again. I upgraded back to 11 and yet again the animated GIFs slowed down. This happens for all of my animated GIFs.
I like viewing my animated GIFs, and since I don't have any problems yet with Firefox 10, I'll be sticking with it for a while...

Yes I have exactly the same problem, and it has NOT been solved yet in Firefox 14. Please Mozilla, what is the use releasing more and more "major upgrades", Firefox 11, then 12, then 13, then 14 (one per month !) if you don't even care to fix the big problems ? That is just marketing crap, nothing more. You guys used to do amazing job, but the new policy is just unbearable, no offense meant : you need to react !

Similar Messages

Why are artists in music library being removed from alphabetical list once a track has been played? All artist recently played appear before 'A' in my library.

Why are artists in music library being removed from alphabetical list once a track has been played? All artist recently played appear before 'A' in my library now rendering the search bar on right of screen useless.

Also, why would my music play at all when I turn iTunes Match off and delete all tracks off the phone? Home sharing also disabled. It is very odd!

I have CDs, legally purchased and uploaded to iTunes (v9.1.0.79)...they were on a harddrive and now I tried to play on my new computer (iTunes v11.0.2.26), but whilst the files appear intact they skip through each song in seconds...why? and how to fix?

I have CDs, legally purchased and uploaded to iTunes (v9.1.0.79)...they were on a harddrive and now I tried to play on my new computer (iTunes v11.0.2.26), but whilst the files appear intact they skip through each song in seconds...why? and how to fix?

I don't recognise the symptoms as such, but here are a couple of things to try.
Check all tracks
Unchecked tracks are skipped during normal track to track playback. Go to the Songs view and CTRL-click on an empty checkbox, or CTRL-click on a filled one twice. This will ensure all tracks are checked.
Repair permissions
To make sure that your iTunes folder (or media folder if located separately) has the correct permissions, right-click on the folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but later versions of Windows shouldn't be too different.
You can also clear the Read-Only flag for the entire library from the Properties dialog.
tt2

I have placed a check mark in the Block Pop-Up Windows box and when I restart Firefox, the box is empty and I begin receiving Pop-Up's again. What do I have to do to make the check-mark permanent?

I have placed a check mark in the Block Pop-Up Windows box but when I restart Firefox, the box is empty and I begin receiving Pop-Up's again. What do I have to do to make the check-mark permanent?
== This happened ==
Every time Firefox opened

See this:
http://kb.mozillazine.org/Popups_not_blocked#Other_software_disables_the_popup_blocker

Unable to download because it says "You are running an operating system that InDesign no longer supports. Refer to the system requirements for a full list of supported platforms." But its updated according to the system requriements

Unable to download because it says "You are running an operating system that InDesign no longer supports. Refer to the system requirements for a full list of supported platforms." But its updated according to the system requirements. What can I do to fix this?

Which versions of InDesign are you referring to? What are the operating system specs for the machine?

Everytime I update my music, my apps are being reinstalled so I have to submit my username and password in every app all over again.

Everytime I update my music, my apps are being reinstalled so I have to submit my username and password in every app all over again.

Everytime when you sync your iPhone to iTunes , have you authorize your account? Authorize account will be required if you have one or more apple device that sync with the same iTune. You can authorize your apple account by signing the apple account in iTunes. Hope it help.

Why are Navigation Tabs visually different in IE than in Firefox? - Fix?

I have an Apex 3.2 app that is using Theme 15. I have chosen to use standard tabs for navigation between pages. In Firefox the tabs look very good. Lined up and spaced nicely with titles.
Problem.....when I go to IE and check out the application, the tabs are a mess. The class = t15CurrentTabCenter (which holds the tab title) is shown enlarged and the top of the cell or class (?) is above the top of the tab_close_c.gif that is on the side of it.
I wish I could insert a picture here to show you. Because I know I am not explaining this good.
But, if anyone has knowledge of what is going on and how I can fix the look in IE, I'd really appreciate hearing from you.
Thanks,
Maggie

Well, I found the answer at this thread:
Re: Theme 15 - Problem with Tab Image Alignment
I wasn't trying to wrap a title on any tab, but I guess IE was.
Thanks for the past thread.
Maggie

Why are round brackets escaped when copy/pasting URLs from Firefox, in contravention of RFC3987?

Go to any site, and add a 'hash fragment' to the end of the URL that contains round brackets. Copy that URL out of Firefox and paste into a text editor, like so:
https://developer.mozilla.org/en-US/#%28testing%29
Note that the round brackets have been escaped into %28 and %29 characters.
RFC3987 specifies that "(" and ")" are 'gen-delimiters' are are _not_ equivalent to their escape codes. Replacing these characters with their escape codes is as incorrect (according to the spec) as replacing the "$" or "!" characters (which are not escaped in FF or other browsers) and the "'" (apostrophe) character, which universally is. No, I don't understand it either.
Worse, this behavior does not match what the other major browsers do, so Firefox has essentially broken the promise that URLs are universal. If there are any reasons for doing this, they have not been made clear or documented, that I can find.
The hash fragment is increasingly being used to store 'client side' information, and so messing with these characters is breaking applications. I'm trying to understand if there's a good reason why, or just poor programming. In which case, I'll log a bug report.

Webbrowsers do not use RFC3987 at all. See section 1.2.a about Applicability. Maybe you should have a look at RFC3986 instead.
What is the delimiting role for the round brackets that would allow their unescaped use?

Why are keywords for Delicious bookmarks no longer recognized in Firefox 25 and Firefox 26?

I use Delicious Bookmarks 2.3.4 for synchronizing bookmarks and their keywords on different computers. After updating to Firefox 25 the keywords are no longer recognized. If I enter a keyword like "foo" it doesn't send me to the bookmark with the keyword but starts a google search for "foo". When I downgrade to Firefox 24 it works again.
Was this change introduced by purpose (like the keyword search removal in FF 23) or is this only some side effect?
Is there any way to get rid of this problem and have that feature again?

That would be a question for Delicious support or Help.
Have you tried some basic Firefox troubleshooting, like the Firefox SafeMode? <br />
https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
Firefox 25 was released 6 1/2 weeks ago and this is the first mention I have seen in this forum about Delicious keywords no longer working in Firefox 25 and above.

Why are forms with calculations so slow?

I am using a form with a number of dynamic fields. After entering a value, it takes over 30s to update and allow me to enter the next value. This delay is present even when filling in fields that are used in calculations.
The delay is present even when filling fields that are NOT used in calculations.
Message was edited by: tdlittle.gm

Christopher,
I will agree with other posters that, in the absence of any need to make "cross-platform" transfers, it would be better to format the drives as HFS+ (Mac OS Extended) before you use them.
I don't think, however, that this will have any effect on transfer speeds (it might, but I don't think so). If you purchased these drives as USB2 devices, then they undoubtedly use a USB2 interface. The drive itself, however, might deliver slower performance. In other words, the "bottleneck" wouldn't be the bus speed, but the drive's ability to record data. This would be similar to the difference between 5400 RPM and 7200 RPM drives, both connected to the same bus. A faster drive will deliver faster speeds over that same bus, and the Key drive you have might be very slow.
It might be a case of getting what you pay for. Were these relatively inexpensive drives? Perhaps a more expensive, well-known brand name drive would perform better.
Scott

Why are "contact shadow" builds so slow?

I like to use a "contact shadow" for some of my builds. Usually I have a single picture that has that shadow type applied and no other text/items or very few of them in the remainder of the slide. Problem is that the slide takes at least a second or two to build which can be very jarring in the flow of the talk. If I remove the contact shadow (use none or a drop shadow) the slide builds immediately.
is this normal for keynote ? (i am using 6.2). Anything I missed/can do about this?

Sorry my session timed out, I was going to include the following:
Try this repair for Keynote 6.2, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
4
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
5
when complete, restart the Mac normally, Apple menu > Restart
6
install Keynote from the Mac App Store

Firefox slow, laggy, choppy performance on powerful PC. Other browsers working fine. Help?

i7 930 @ 3.8GHz, 6GB RAM@1600MHz, Intel SSD and Nvidia 660 Ti 2GB.
That's my PC. It starts up in seconds, it's 100% stable, can run any video/audio production software with ease, and play any game at high/max settings.
But somehow, Firefox doesn't seem to care.
It keeps freezing up, lagging, and driving me crazy in the process. I've tried everything: reinstalling, resetting FF, removing addons, reinstalling addons, doing clean installs.... nothing. I've tried chrome. Works fine. IE even works better than FF.
All this started in the last year or two. Slowly. I've felt each version getting slower and slower, and now it's just ridiculous. I open like 10 tabs and FF grinds to a halt, it takes 5-10 seconds for it to un-freeze sometimes. And facebook timeline scrolling?! forget about it. the more you scroll, the worse the freezing gets, to the point where I'm forced to restart FF and start all over again!
I've been with FF since v1, I've watched it grow into the best browser of all, but I've also watched chrome rightfully take that title away in the last few years, because of what FF has turned into.
I'd much rather stick with FF, but the frustration is getting out of hand. I can't take the slow and buggy performance, and I can't seem to find a solution.
So is there a way to make firefox work as it should on a fast PC, or do I have to switch to chrome to get the performance back?
(Win7 x64 SP1, ADSL 20 MBit)

As I have seen That you have installed so much extension which is the main reason behind the slowness. Since they need some memory each time you start working with firefox.
However do try to disable those extensions which are not used regularly ,when you need to used them just enable from addons section.
Also try with [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode] and check whether the problem still persist or not.
Read This Thread : [http://mzl.la/1BAQIeY Many CPU Processes]
These are some steps will help you to fix issues like slowness:
If monitoring tools shows High ram used by firefox then it might be due to Hardware acceleration enabled . Uncheck them from '''Options'''>'''Advance''' >under '''General''' tab.
Sometimes plugins becomes the cause,so Check whether all plugins are up to dated or not from '''Addons''' >'''Plugins''' tab.
See this thread for other reasons : http://mzl.la/14CBA3o

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

Why are not pop up message window when message type I and W

Hi All,
I am working in BADI ( me_purchdoc_posted~posted) for t-code ME21N. Actually i want show material number, material description and ABC indicator of material at saving point of PO if material is significant.
code is properly working but does not showing error message window when I am using message type I (information) or W (worming message) .
if i am using message type E ( error message )then showing message window just link Information message.
So i can no understand why are not message window pop up when i take message type I and W.
my code is that
method IF_EX_ME_PURCHDOC_POSTED~POSTED
IF SY-TCODE EQ 'ME21N' OR SY-TCODE EQ'ME21'.
DATA : wa LIKE LINE OF IM_EKPO.
DATA : VAR_MAKTX TYPE MAKT-MAKTX.
DATA : VAR_MAABC TYPE MARC-MAABC.
DATA : P TYPE STRING.
DATA : P1 TYPE STRING.
LOOP AT IM_EKPO INTO wa.
    SELECT SINGLE MAABC FROM MARC INTO VAR_MAABC WHERE matnr EQ wa-matnr AND werks EQ wa-werks.
    SELECT SINGLE MAKTX FROM MAKT INTO VAR_MAKTX WHERE matnr EQ wa-matnr. " AND werks EQ wa-werks.
      IF VAR_MAABC EQ 'A'.
        P = 'is significant material'.
        CONCATENATE WA-MATNR '(' VAR_MAKTX ')' P INTO P1.
        MESSAGE P1 TYPE 'E'.
        EXIT.
        ENDIF.
ENDLOOP.
ENDIF.
endmethod.
guide me...............

Hi vinod,
thanks for reply......
yes, my requirement is to show the popup window with material number, material description and ABC indicator of material at saving point of PO if material is significant.
I find Badi to transaction me21n at saving PO. Badi ME_PROCESS_PO_CUST does not exist.
so i am using Badi me_purchdoc_posted~posted.
This Badi ( me_purchdoc_posted~posted ) is properly working But showing message "system error ( error in method po_post ) "
when I am click on OK then automatic leave from transaction.
guide me..........

Hi why are my photos after downloading twice ,once in photo library and once in a file with the date why cant i delete a file its an iphone 4s please help

why are my photos after downloadon twice one as photo library the other as a file with date how can i delete one file same pics

Generally I would not use Facebook for sharing any photos, it compresses the photos substantially, and when you have shadows and dark colours you get visible "bands" where there should be subtle gradients, ie at sunsets and sunrises.
It sounds like you are using two methods to upload to Facebook:
1. Sharing from within Aperture, which basically syncs Facebook with your Aperture album, so any changes made at either end gets synced, hence the deletions from Albums, although the original file should still be in your library, just removed rom the album. It is like a playlist in iTunes.
2. Exporting pics and uploading to Facebook from the browser.
I am not sure how method 1 gets compressed, but I know that uploading hi-res jpegs to Facebook using method 2 results in poor quality images.
I wouldn't even bother comparing option 1 or 2, and they will both be poor images once you view them on Facebook, as opposed to viewing uploaded images on proper image sharing / hosting sites.
Your problem is not with Aperture, it is using Facebook for showing your work.
If you export pics form Aperture at high res jpegs or TIFFs your images will be fine.
If you insist to use Facebook as your way to share your work, then your workflow should be this:
1. Right click images you want to share.
2. Select Export version.
3. Export as 100% size and ensure the export settings are set at 100% quality.
4. Upload this pic into Facebook.
This will get you the best image size and resolution on Facebook.
See how you go.

Why are animated GIFs in Firefox 11 slow? I downgraded to Firefox 10 and the animated GIFs suddenly play fine again, so I am positive that the update messed up the playback delay of animated GIFs somewhere.

Similar Messages

Maybe you are looking for