Why are animated gifs not looping

I can not understand why an animated gif set to loop twice does not loop at all. same file works in all other browsers.

This page explains the settings for that:
* http://kb.mozillazine.org/Firefox_:_Tips_:_Animated_Images

Similar Messages

  • Why are animated gifs not displaying animations in the preview?

    Why are animated gifs not displaying animations in the preview?
    My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
    I'm using Windows 7 32 bit
    My coworkers are using a mac.
    One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
    Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

    I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

  • Why are animated GIFs still broken?

    https://discussions.apple.com/thread/1229922 <-- this
    'nuff said, this has been a problem ever since Preview lost its ability to animate GIFs. It may be a WebKit problem (i.e. yeah, Apple, just go ahead and let yourself off the hook...right), but regardless, how come it has not been addressed sooner? Safari chokes after about 4 frames of animation; if the GIF loops, it starts over fresh, but it chokes again.
    I am using 10.5.8, but I am aware this is still a problem for all 10.6 OSes and iOSes. I don't know about Safari for Windows; not relevant at the moment.
    Why is this still a problem after three-and-a-half years of Safari development have passed?

    Well, here are the issues I have run into.
    1) Gifs load half way and then animate on the base but not on the top.
    2) Gifs animate waaaaaaay too fast.
    I have found no solution for the 1st issue, and it does not always occur.
    As for the second one it has to do with browsers all reading the "0 delay" setting of the animation at uniquee speeds. Most round it to 10/100th of a sec, while Safari loads it at 3/100th resulting in a faster images, but a non-standard speed. Which ***** since I am running animations that follow using a set time out only to have safari throw everything off. I think one other browser runs at something like 6/100ths so Safari is not the only one. Faster could be nice if they all got on the same page, but as they are it is pointless. Pretty much meaning if you want an animated gif you have to avoid the "0 delay setting at all costs, and pretty much anything under 1/10th because it will not display the same in many browsers. It could be this fast speed in Safari that is causing the loading and instability issues with sime.

  • Why does animated .gif not work with windows?

    I have created an animated .gif to place in a powerpoint presentation, but when I sent it to my client who used a windows computer, it does not work. When I try to open the .gif in my windows 98 virtual machine, it says it has errors.
    I created it in photoshop CC using the timeline and saving it with "save for web".

    AAAAAAAGGGGGGHHH!  Stupid Powerpoint corrupted the files when it "packaged" them
    Thank you for pointing me in the right direction.
    It is very difficult to figure out what my client is doing on his end.
    It won't let me mark you both as correct.

  • Why are animated GIFs in Firefox 11 slow? I downgraded to Firefox 10 and the animated GIFs suddenly play fine again, so I am positive that the update messed up the playback delay of animated GIFs somewhere.

    Self-explanatory. I am positive that the GIF I am viewing is faster than what it's supposed to be. I viewed the same animated GIF in another browser and it plays fine. It just plays slower in Firefox 11. I downgraded to Firefox 10 and the animated GIFs were fine again. I upgraded back to 11 and yet again the animated GIFs slowed down. This happens for all of my animated GIFs.
    I like viewing my animated GIFs, and since I don't have any problems yet with Firefox 10, I'll be sticking with it for a while...

    Yes I have exactly the same problem, and it has NOT been solved yet in Firefox 14. Please Mozilla, what is the use releasing more and more "major upgrades", Firefox 11, then 12, then 13, then 14 (one per month !) if you don't even care to fix the big problems ? That is just marketing crap, nothing more. You guys used to do amazing job, but the new policy is just unbearable, no offense meant : you need to react !

  • Why are animated GIF's...

    ...Not working when I forward them using Mail? I've tried forwarding them to myself and when opened the GIF's are no longer animated and the size and format of things has changed. This also happens in redirect. Any Ideas?

    Try Thunderbird which is free.
    I'm not a fan of using HTML for email messages and IMO, a big mistake by Microsoft which came back to haunt Microsoft and Windows users with various security issues.
    If you automatically render all HTML received (with any email client with OS X) and a spammer uses HTML for message composition and includes embedded images or objects that must be rendered from a remote server, if the Mail.app Junk Mail filter does not automatically mark the message as junk and you open the message, this can reveal that your email address is valid to the spammer causing more spam to be received.
    Copied from Why HTML in E-Mail is a Bad Idea.
    Because it introduces accessibility problems. When you write in plain text, the receiving mail client renders the text in whatever font the reader chooses. When you format email with HTML, the sender controls the formatting. But this is a trap: You only think your message will render the same way to the viewer as it appears to the sender. In reality, the receiver can end up squinting because the font looks so tiny, or vice versa. HTML is not rendered the same way from one viewing client to the next - all guarantee of accessiblity goes out the window. This is especially problematic for visually impaired persons.
    Because it can introduce security issues and trojan horses -- it's a gateway to danger as any Outlook user can tell you. HTML can include any number of scripts, dangerous links, controls, etc.

  • Why are animation presets not showing in pop-up list for fractal noise?

    In a standard install of AE CS4, the animation presets pop-up list showed a bunch of presets for fractal noise (see attached image).
    In a standard install of AE CS5.5, the animation presets pop-up list showed a bunch of presets for fractal noise (see attached image).
    In a standard install of AE CS6 (on the Mac), the pop-up list is empty. (Yes, I enabled the "Show presets"), despite the fact that, eg, "Curtain.ffx" is in the equivalent Presets>Backgrounds folder.
    Is there another switch to turn on? I'm using Mac OSX 10.7.5.

    In a standard install of AE CS4, the animation presets pop-up list showed a bunch of presets for fractal noise (see attached image).
    In a standard install of AE CS5.5, the animation presets pop-up list showed a bunch of presets for fractal noise (see attached image).
    In a standard install of AE CS6 (on the Mac), the pop-up list is empty. (Yes, I enabled the "Show presets"), despite the fact that, eg, "Curtain.ffx" is in the equivalent Presets>Backgrounds folder.
    Is there another switch to turn on? I'm using Mac OSX 10.7.5.

  • Safari - Animated GIF not Animating Issue

    I am frequenting site and have noticed animated gifs not animating properly on this page. The site is http://www.woot.com
    Problem Detail:
    There are two "whirly lights" on each side of a progress bar under the item currently for sale. The left light starts to animate while the page is loading but stops while the right light continues its animation.
    This particular site may usually only uses these images every once in a while so if no one checks this in the next couple days the images will no longer be there. I created a web archive the site which I could send if this page does go away. The issue does not happen in Firefox or Internet Explorer.

    Hi and Welcome to Apple Discussions
    I get the same effect as you in Safari. Loaded with no problem in Firefox. Page does have coding errors, which can lead to inaccuracies in how the page is rendered. Safari is much more strict about correct coding than Firefox, adhering to web standards set out by Web Standards Project.

  • Why are some of the loops in GB 'greyed

    Why are some of the loops in GB 'greyed out' " I'm specifically interested in 'slide guitar' for example and cant find a reason why there's no access. My iMAC was bought in April 2010??

    Court Kizer wrote:
    Would you please stop spamming every single apple garageband discussion forum with your website. It doesn't have the answers on how to force the loops to download.
    You're using the forums to spam your site in almost every single thread, and wasting users time.
    Have to disagree with you there, Court Kizer. The Bullets&Bones site is, in many ways, where I really learned how to use GarageBand.
    Take a look at the list in the Top Users box on the right. Those points are awarded by people who got their answers from the advice posted.

  • Disc Burner. Why are some files not readable or writeable?

    Hello,
    I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
    "The operation cannot be completed because some data cannot be read or written.
    (Error code - 36)"
    Followed by the choices: "Stop" or "Continue".
    I have a bad feeling that my startup disk is too small but I am not sure.
    Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
    Here are the specifications:
    Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
    I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
    I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
    Here is my process (I hope I am doing this right - I am new at this):
    1. I first insert a blank DVD-R
    2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
    3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
    Why would some files not be readable or writeable?
    4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
    "Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
    However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
    Am I doing this the right way?
    Why are some files not "readable or writeable" as it indicates in the error message?
    Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
    Thanks

    To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
    Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
    Thanks Kappy

  • Why are the iPhotos not listed in the finder?

    why are the iPhotos not listed in the finder?

    There are many, many ways to access your files in iPhoto:   You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    There's a similar option in Outlook and many, many other apps.  If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto not running:
    For users of 10.6 and later:  You can download a free Services component from MacOSXAutomation  which will give you access to the iPhoto Library from your Services Menu.
    Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    Show File:  a. On iPhoto 09 and earlier:  Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.    3.b.
    b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

  • Why are my songs not completing play?

    why are my songs not completing play? plays half a song then on to the next

    Welcome to the Apple Community.
    Try restarting iTunes.

  • Why are my contacts not showing up in my iMessage on my macbook pro?

    Why are my contacts not showing up in my imessage on my macbook pro?

    open messages. go to messages>preferences>accounts. select your icloud account from the left sidebar, and uncheck 'enable this account' then recheck 'enable this account'
    you should also be using icloud to sync your contacts. sytem preferences>icloud. check the 'contacts' box

  • Why are my audiobooks not going through home sharing?

    why are my audiobooks not going through for home sharing.

    According to this thread (https://discussions.apple.com/thread/3525692), it looks like you are not able to share audiobooks through Home Sharing:
    You can share MP3, AIFF, WAV, AAC, and radio station links, but you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files.
    You can leave iTunes feedback here: http://www.apple.com/feedback/itunesapp.html

  • Why are my emails not deleting from all devices when deleted from one?  I have iCloud set up and turned on. I have ipad2, iphone5 and a Mac. What am I doing wrong?  Thank you

    Why are my emails not deleting from all devices when deleted from one?  I have iCloud mail set up and turned on. I have ipad2, iPhone 5 and a Mac desktop. What am I doing wrong?  Thank you.

    It depends on the type of email account you are using, not on iCloud.  If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices.  If you are using a POP (POP3) account, it won't.  (iCloud email, Gmail and Yahoo are all IMAP accounts.)

Maybe you are looking for

  • IWork (Pages) does not work after last system update!

    since some days (after last system update) iWork programms are not starting any more! macosx 10.7.5 new update solution atemd: cancel p-ram and p-list, re-installing iwork from DVD and update it from http://support.apple.com/kb/DL1563 macbookpro 2.53

  • Problem with addition of jar file to DC

    Hi WDers, I have a DC of type WD. I'm trying to add com.sap.security.api.jar file to this component so that I can get IUser and work on it. I have added this security jar file as an External jar file to the DC. But whenever I try to DC->Build, the ja

  • How can I connect additional minitor to my 520-1070?

    I would like to connect my DELL monitor (AS501) as secondary monior to my HP TouchSmart 520-1070 All-In-One PC. Is it possible at all? If so, please give me detailed instructions. Thank you in advance!

  • Referencing a function in a class from another class

    For example : I got the following situation class main { classOne one; classTwo two; public main { one = new classOne(); two = new classTwo(); class classone { private int i = 5; public classone { public count() { System.out.println(i+ getJ()); class

  • Your Comments Please: Business Case for XI

    We are a small site commencing a major project that will involve integrating SAP R/3, BW, CRM, and various non-SAP applications (web and client/server). The applications have a number of external interfaces, receiving data from or sending data to ext