Why are images converted into pdfs instead of jpgs?
When saving an image that's been corrected, as a jpg, it is automatically converted to a PDF.
Some sites I use will only accept jpg files. Where can I change this feature in acrobat XI?
If it is as you describe then this is a problem with the OTHER program. Acrobat can't change how other programs save their files.
There is another possibility, that the file is actually a JPEG but your system is set up wrong, so that Acrobat is run when you double click JPEGs.
You can look in File Properties to see which this is. But have you asked in the forum for the "other" program?
Similar Messages
-
Why are photos save as .jpeg instead of .jpg? Can this be corrected?
Why are photos save as .jpeg instead of .jpg? Can this be corrected? In certain applications I have to manually change the ending so that the application can open the photo. Is there a setting to control to correct this?
When I mail photos (via GMail) from my iPhone they are received on my PC as .jpg files, even if sent at full resolution. Perhaps your e-mail service has imposed an attachment size limit, and in the process scales the attached picture down and alters the file extension?
What happens if you e-mail a photo from your iPhone and open the message from a PC instead of the Surface? What e-mail service are you using? (e.g. your ISP's service, or Yahoo, Gmail, iCloud, etc.) When you send the photo from your iPhone, are you selecting a reduced resolution? -
Mangal Fonts and Tunga Fonts in (MS Home and Student 2010) Word 2010 not getting converted into PDF
Why do I get a totally blank PDF file whenever I try to convert any (Microsoft Office Home and Student 2010, Version: 14.0.6029.1000) Word document file containing either Mangal Fonts (Hindi) and Tunga Fonts (Kannada) into a PDF file (by using Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790 MB, Complete/Full Version) after formatting and reinstalling all the necessary software / softwares (Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3 and Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB)?
I'm using
01) Microsoft Windows XP, Home Edition, Version 2002, Service Pack 3
02) Computer: Intel(R) Pentium(R) 4 CPU 3.00 GHz 3.00 GHz, 504 MB of RAM
03) Windows XP Service Pack 3, Version: 20080414-031525, Program File Size: 9.08 MB
04) Microsoft Office Home and Student 2010, Version: 14.0.6029.1000, Product ID: 82503-388-0792296-26607, Program File Size: 490 MB
05) Adobe Acrobat X Standard - English, Version: 10.1.4, Program File Size: 1790.00 MB, Complete/Full/All Version/Features has/have been installed
06) Windows Internet Explorer 8, Version: 20090308.140743, Program File Size: 4.20 MB
Any Word 2010 document file that has been converted into any PDF File unfortunately does not show either the Mangal (Hindi) Fonts or the Tunga (Kannada) Fonts.
The PDF file will unfortunately become/remain totally/fully/completely blank.
When I convert an Excel Workbook having the Tunga Fonts (Kannada) to/into a PDF File, some of the Tunga fonts in the PDF file are legible and some are unfortunately illegible (get superimposed / overwritten on each other).
Perhaps I may get the same result if I try to convert an Excel Workbook having the Mangal Fonts (Hindi) to/into a PDF File with some Mangal fonts being/becoming legible and the rest being/becoming illegible (getting superimposed / overwritten on each other).
Tanveer
Syed Tanveeruddin, Karnataka, India
Message was edited by: tanveerindian
Message was edited by: tanveerindian
Message was edited by: tanveerindianMy chronological sequence of steps to create a Word 2010 Document or an Excel 2010 Workbook:
I first create a Word Document File or an Excel Workbook File and save it by giving an appropriate file name.
Then I right click on the closed Word Document File or the Excel Workbook File in the file folder and convert it into a PDF by retaining the same/original file name.
The font list of Microsoft Word 2010 claims/says/states that both Mangal and Tunga are True Type fonts and also that these fonts will/would be used on both printer and screen.
In case if there is any text content in English in the beginning it will get converted into PDF only till/until either a Mangal(Hindi)/Tunga(Kannada) Font starts.
The remaining English text content does not get converted into/to PDF the moment a Mangal(Hindi)/Tunga(Kannada) Font starts. If the entire matter is purely (100 per cent) in English text it will fully / completely / totally get converted into a PDF file without any problem.
Message was edited by: tanveerindian -
My goal: "convert into pdf" -- the file is instantly saved with the same name as pdf. feasible?
Good evening dear experts,
i use Adobe Acrobat 9 pro extend to convert word, ppt, jepgs etc. into pdfs.
No if i
1) convert a ppt into a pdf: it asks --> "save as" --> converts --> opens the file
2) convert a jpeg into a pdf: it instantly --> opens the file as pdf --> i need to save it manual under "save as"
In both cases i want to
my goal: "convert into pdf" --> the file is instantly saved with the same name as pdf
WITHOUT asking me "save as" + "opening of the file".
Is the possible, and if yes, HOW ?
A fast answer is very very much appreciated, for i have to convert hundreds of files tonight in order to get it into 1 pdf
Thx and greetings from Germany,
JuliaWe are nearly there!
A] - righclick "convert-to-method": @Bill: thx again, your approach worked for ppt, doc-files etc.
2 problems:
1) exception: for jpegs/bmps it doesn't work (the file is still opened after conversion, strange).
2) the output-folder. it only accepts the standard "output-folder documents/*.pdf" (which is a step further but not my end-goal). If i choose another output-folder via "browse", this setting is NOT SAVED (even after clicking on "accept" + "ok").
my goal: the the file should be automatically saved in THE SAME folder the original file is in (seems that can't be achieved and the standard folder is the only thing where to convert in?).
Personal background for understanding: i have many folders with several ppts in it. Once i send it out to a customer, i always have to convert it into a pdf. thats why i want to save time (i know that i can convert it directly + send per mail, but i want an up-to-date copy of the pdf in the folder as well).
B] - "the automated solution"- @Sandeep:
i just watched your link http://tv.adobe.com/watch/acrobat-tips-and-tricks/automating-tasks-in-acrobat/
about batch processing and i think its really helpful if i want to convert ALL of the files in one folder.
1 question regarding this: are the subfolders also affected?
As i understood from the video, i choose 1 "watched folder" and a "destination folder" (can be the same). E.g i have 1 big folder "designs" with many subfolders. I create a batch converting ppts to pdf to "the same folder" Once i run my batch, it converts ppts in the chosen folder "designs" + all subfolders into the same folder, right?
If this is the case, i get too many pdfs, for i only need the latest ppt-version to be converted (copies of old ppts are also in the files) ;(.
Do you have an idea how can i solve this?
Now we are very near to the end-solution of my goal:
i need this option "to the same folder" in my general settings when i convert a file via right-click. ATM it only works with the standard-folder documents/*.pdf
In A], my files are now instantly saved with the same name in 1 specific folder. I would be completely happy, if this folder would be alwys the same as the one with the original file (and not 1 specific folder)
2nd problem with a]: it does not apply to picture files (bmp, jpegs..)
So if we could solve this, i would be a completely happy girl
Guys, you are great, thx again for the whole struggle with my concerns!! -
No Microsoft files listed in the settings "convert into PDF files"
Hi, I wanted to convert different Microsoft Office files, but it doesn't work. There are no Microsoft files listed in the settings "convert into PDF files". I had the trial version of Adobe Acrobat Pro XI installed on a MAC in Windows that runs trough Parallels. Hope somebody can help. Thx
Hi Rahul,
many thanks for your suggestion.
Yes, Parallels is a virtual machine on the top of MAC and I can see all files in the Windows Explorer. Also the ones I created on the MAC top with the Microsoft Office Software Word or Excel for MAC as well the ones I created earlier on a Windows PC.
Unfortunately there is no possibility to convert files into PDF format with a click on the right mouse. And Adobe also doesn't open Word documents because it doesn't support this format.
But nonetheless it wouldn't be a solution that I prefer to convert in adavance every single file in a PDF format. I need to create a PDF package from different formats.
I assume this issue has to do something with MAC or Parallels, because this function of the Adobe Versions Acrobat 8 Pro and XI Pro work well on a Windows PC. I just don't understand why there are no Microsoft Office file formats listed in the Adobe settings. This settings also can't be changed. I tried to find out but couldn't find any hint for this problem thus I'm a bit at a loss... Maybe you have another idea?
Regards
Ly -
Problem in converting into PDF
HI,
I need to convert data in PDF format but i am facing problem in it.
i have used 2 methods,
1. i used job_open,job_submit,job_close,BP_JOB_READ to submit job and CONVERT_ABAPSPOOLJOB_2_PDF to convert into pdf format. it is working fine in this case.
2. But when i use SUBMIT program with USING SELECTION-SCREEN 'xxxx' WITH selcrit2 IN 'xxxx'.. and then spool which created i used in FM CONVERT_ABAPSPOOLJOB_2_PDF , it is not converting even though same exporting and importing parameters are passed in this as in above.
Please reply.
Regards,
nehaHi,
First check whether the spool request is working fine or not by just execute any PO or sales order or any print view and from the menu give print there by you will get the spool number, make a note of the spool number.
Go to SE38 and enter the program RSTXPDF4 and execute it will ask for the spool number give the spool number noted earlier and if PDF format is coming means you have some error while configureing the SP01.
Hope my answer helps you.
Cheers!! -
Output of RFC needs to be converted into PDF format
Hi Experts,
In the ESS screen, we have to provide one link for every employee. When the user will click on the link, one letter in PDF format should be displayed to the user. This PDF will act as a "Address Certificate". The address certificate will contain information related with name, address, passport details etc. How we can achieve this?
In my view, we will have to create one Z-RFC. The ABAPer will create the Z-RFC. Now the input for the Z RFC will be employee no. The output will be Name, Address and Passport details.
The information provided in table format needs to be converted into PDF form. How we can do so? What all services needs to be activated for this?
Regards,
GaryHi Gary,
When you say the ESS screen, what do you mean by this is it ECC side or in Portal Side.
It its in Portal side then, I think you need to create a WebDynpro application which display output through ADOBE forms. For that you need to have basic WebDynpro knowledge.
Apart from that ADS needs to be configured. There are sevrel tutorial available in SDN. For creating a WebDynpro Application with Adobe Interactive forms.
Do let me know if you require more information.
Regards, -
Why are images being copied from a linked library that aren't modified
I'm trying out the linked library feature and that is my preffered way of using iPhoto but I notice that many images that haven't been modified in iPhoto are being copied as full res modified images. My camera Nikon D2x supports auto rotation of verticle images which keeps me from having to manualy rotate these images. I understand that when I modify an image using iPhoto's tools that a full res image will be copied into a modified folder but why are images that have simply been tagged in camera as needing rotation being copied as well. Vertical images account for at least half of all images I shoot and diplaying them properly should be a look at exif or other metadata and applying rotation but since they are images straight from camera they shouldn't show as modified. Anyone have experience or suggestions on how to avoid having auto rotated images show as modified?
blinden:
Welcome to the Apple Discussions. I ran into that but in a different way. I had all of my image files in folders on a second HD and used another application to manage them. I decided to use iPhoto's alias method to work with the same files. I got a lot of files that were copied over as modified. Have no idea why. I ended up doing global revert to Original several times, watching the Modified folder via the Finder, until it became empty. I then closed iPhoto, dragged the Modified folder to the trash and then launched iPhoto with the Command+Option keys depressed and rebuild the library using the first three options. That worked and got me a pristine library.
I had not figured out why that happened. I've had the auto-rotate turned off for about a year now. Had I know what was causing it I could have checked to see if all of those bogus modified files occurred before I had turned off that option in the camera. I'm guessing now that that's what I would have found. Thanks for the info. -
Why are images on my desktop scrambled, chopped up, and behaving erratically?
why are images on my desktop scrambled, chopped up, and behaving erratically?
Exact model would be helpful
Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
You may have a problem with the video chip.
Here is how to tell...
Shutdown your machine. Hold down the shift key. Poweron. Bootup will be longer.
Wait awhile while you harddrive is being checked.
An article on how to boot into safe mode.
http://support.apple.com/kb/ht1455
Runs OK in safe mode...
Running in Safe mode leaves out some video drivers. Which results in your machine not using advanced video hardware. As luck would have it, you can run the safe mode video drivers in normal mode.
Here is how:
https://discussions.apple.com/message/16057567#16057567
Look through the above thread. See the second page. You don't have to read through the first page. Just go to the part where I try a solution that works.
Summary of G5 problems. Includes instructions on a hardware fix for the brave at heart:
See -Rotten Apple- articles in both of these threads.
https://discussions.apple.com/thread/4023152?tstart=0
https://discussions.apple.com/message/18700825#18700825
Robert -
Script Converting into PDF and Sent by Mail -
Hi Experts,
I have faced one problem in Script Converting into PDF format and Sent it thro Mail.
I have used to SX_OBJECT_CONVERT_OTF_PDF FM to convert into PDF format.
and I have used SO_NEW_DOCUMENT_ATT_SEND_API1 FM for sending a Mail.
Now my Problem is, How is use these FM s Correctly. what are the parameters to be passed to send a mail.
Kindly give the Coding for sending a Mail using these above FMs .
With Thanks,
Neptune.Mhi use this...this is good for sending a smartform in pdf format to spool..
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver,
p_sender LIKE somlreci1-receiver,
p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
PERFORM get_job_details.
PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
to sap-spool
spool parameters %_print
archive parameters %_print
without spool dynpro
and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
PERFORM convert_spool_to_pdf.
PERFORM process_email.
if p_delspl EQ 'X'.
PERFORM delete_spool.
endif.
IF sy-sysid = c_dev.
wait up to 5 seconds.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDIF.
ELSE.
SKIP.
WRITE:/ 'Program must be executed in background in-order for spool',
'request to be created.'.
ENDIF.
FORM obtain_spool_id *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> '0000000000'
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
message s004(zdd) with gd_spool_nr.
gd_spool_nr = wa_tbtcp-listident.
MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
MESSAGE s005(zdd).
ENDIF.
ENDFORM.
FORM get_job_details *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
ENDFORM.
FORM convert_spool_to_pdf *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
TRANSLATE it_pdf_output USING ' ~'.
CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
it_mess_att = gd_buffer.
APPEND it_mess_att.
SHIFT gd_buffer LEFT BY 255 PLACES.
IF gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
ENDFORM.
FORM process_email *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
FORM send_email *
--> p_email *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
gd_sender_type = space.
ELSE.
gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_mess_bod
it_mess_att
using p_email
'Example .xls documnet attachment'
'PDF'
gd_attachment_name
gd_attachment_desc
p_sender
gd_sender_type
changing gd_error
gd_reciever.
ENDFORM.
FORM delete_spool *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
EXPORTING
spoolid = ld_spool_nr.
ENDFORM.
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables it_message
it_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
data: t_packing_list like sopcklsti1 occurs 0 with header line,
t_contents like solisti1 occurs 0 with header line,
t_receivers like somlreci1 occurs 0 with header line,
t_attachment like solisti1 occurs 0 with header line,
t_object_header like solisti1 occurs 0 with header line,
w_cnt type i,
w_sent_all(1) type c,
w_doc_data like sodocchgi1.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
regards,
venkat. -
Why all images shrink into a small dot in FlowLayout??
Dear friends:
When I use BorderLayout and GridLayout in JPanel, all images and JLabel are shown up properly,
but when I change Layout to FlowLayout, JLabel still display, but all
all images shrink into a small dot in FlowLayout, what is wrong??
Why all images shrink into a small dot in FlowLayout??
Thanks
sunnyIt is probarbly overkill to set all those, but I guess its better to be save than sorry. No, it is not better to be safe than sorry. It is better to understand how LayoutManagers work. Adding unnecessary code will cause confusion as people maintaining the code will wonder why the code is there.
There is not need to invoke any of the sizing methods. The preferred size of the lable will be the size of the image. So if the image is loaded correctly there is nothing that has to be done.
any new idea??Your where given an idea. Post your SSCCE. No SSCCE. The code you posted is incomplete. We have no idea what your getImage(...) method does or for that matter why you even have a getImage() method. If you would read the Swing tutorial on "Using Labels" or "Using Icons" then you would find working examples. -
ALV output converted into PDF format and send that PDF to user through mail
Hi Experts,
I have report earlier its output was in alv grid.
Now i want that ALV output converted into PDF format.And that PDF output send to user through mail.
Can u please tell how to do?
My code is here(output is displaying in ALV grid).
INCLUDE <icon>.
TYPE-POOLS: slis, kkblo.
TABLES : zmsd_freight_hdr, zmsd_freight_det, zmsd_blinfo, zmsd_diheader.
TABLES : lfa1.
DATA : t_hdr LIKE zmsd_freight_hdr OCCURS 0 WITH HEADER LINE,
T_DET LIKE ZMSD_FREIGHT_DET OCCURS 0 WITH HEADER LINE,
t_bl LIKE zmsd_blinfo OCCURS 0 WITH HEADER LINE,
t_di LIKE zmsd_diheader OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF t_det OCCURS 0.
INCLUDE STRUCTURE zmsd_freight_det.
DATA type(30).
DATA: END OF t_det.
DATA: v_target2(30),
v_zsammg LIKE t_det-zsammg,
v_gsttotal LIKE t_det-zamount.
DATA : BEGIN OF t_data OCCURS 0,
zsammg LIKE zmsd_freight_hdr-zsammg,
zdidbl LIKE zmsd_freight_hdr-zdidbl,
zvkorg LIKE zmsd_freight_hdr-zvkorg,
zinvno LIKE zmsd_freight_hdr-zinvno,
zttlamt LIKE zmsd_freight_hdr-zttlamt,
zstatus LIKE zmsd_freight_hdr-zstatus,
ztype LIKE zmsd_freight_hdr-ztype,
zconfirm LIKE zmsd_freight_hdr-zconfirm,
zconfirmdate LIKE zmsd_freight_hdr-zconfirmdate,
erdat LIKE zmsd_freight_hdr-erdat,
ernam LIKE zmsd_freight_hdr-ernam,
erzet LIKE zmsd_freight_hdr-erzet,
aedat(10),
aenam LIKE zmsd_freight_hdr-aenam,
aezet LIKE zmsd_freight_hdr-aezet,
zline LIKE zmsd_freight_det-zline,
zfptype LIKE zmsd_freight_det-zfptype,
zchrcode LIKE zmsd_freight_det-zchrcode,
zcurcode LIKE zmsd_freight_det-zcurcode,
zqty LIKE zmsd_freight_det-zqty,
zuom LIKE zmsd_freight_det-zuom,
zrate LIKE zmsd_freight_det-zrate,
zamount LIKE zmsd_freight_det-zamount,
zexrate LIKE zmsd_freight_det-zexrate,
zccode LIKE zmsd_blinfo-zccode, "MADK991565
zccode like ZMSD_FREIGHT_HDR-zfcode, "MADK991565
zbldate(10),
zbl LIKE zmsd_blinfo-zbl,
type(3),
waerk LIKE zmsd_freight_det-zcurcode,
zamountl LIKE zmsd_freight_det-zamount,
END OF t_data.
DATA : w_layout TYPE slis_layout_alv,
w_catalog TYPE slis_fieldcat_alv,
t_catalog TYPE slis_t_fieldcat_alv,
w_sort TYPE slis_sortinfo_alv,
t_sort TYPE slis_t_sortinfo_alv.
DATA V_ZINVNO like T_HDR-ZINVNO. "MADK991565
DATA : v_count TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK a0 WITH FRAME TITLE text-001.
PARAMETERS : p_zvkorg LIKE zmsd_freight_hdr-zvkorg OBLIGATORY .
SELECT-OPTIONS : s_zdidbl FOR zmsd_freight_hdr-zdidbl ,
s_zccode FOR lfa1-lifnr ,
s_status FOR zmsd_freight_hdr-zstatus ,
s_ztype FOR zmsd_freight_hdr-ztype ,
s_erdat FOR zmsd_freight_hdr-erdat ,
s_ernam FOR zmsd_freight_hdr-ernam ,
s_zconfd FOR zmsd_freight_hdr-zconfirmdate .
PARAMETERS : p_zconf AS CHECKBOX .
SELECTION-SCREEN END OF BLOCK a0.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-002.
PARAMETERS : p_hdr RADIOBUTTON GROUP rad DEFAULT 'X' ,
p_det RADIOBUTTON GROUP rad .
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
AT SELECTION-SCREEN.
START-OF-SELECTION.
PERFORM get_data.
PERFORM process.
PERFORM display.
END-OF-SELECTION.
PERFORM fm_get_num_pages.
AT USER-COMMAND.
AT LINE-SELECTION.
TOP-OF-PAGE.
PERFORM fm_top_of_page USING '7010' sy-title space.
FORM get_data.
SELECT *
FROM zmsd_freight_hdr
INTO TABLE t_hdr
WHERE zvkorg EQ p_zvkorg
AND zdidbl IN s_zdidbl
AND zstatus IN s_status
AND ztype IN s_ztype
AND erdat IN s_erdat
AND ernam IN s_ernam
AND zconfirmdate IN s_zconfd
AND ZFCODE IN S_ZCCODE. "MADK991565
IF p_zconf = 'X'.
DELETE t_hdr WHERE zconfirm NE 'C'.
ENDIF.
CHECK NOT t_hdr[] IS INITIAL.
SELECT *
FROM zmsd_blinfo
INTO TABLE t_bl
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg.
SORT t_bl BY zsammg.
SELECT *
FROM zmsd_diheader
INTO TABLE t_di
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg.
SORT t_di BY zsammg.
IF P_DET = 'X'. "MADK933361
SELECT *
FROM zmsd_freight_det
INTO TABLE t_det
FOR ALL ENTRIES IN t_hdr
WHERE zsammg = t_hdr-zsammg
AND ZINVNO = T_HDR-ZINVNO . "MADK991565
SORT t_det BY zsammg zline. "MADK991565
SORT T_DET BY ZSAMMG ZINVNO ZLINE. "MADK991565
ENDIF. "MADK933361
ENDFORM.
FORM process.
REFRESH t_data.
CLEAR v_gsttotal. "MADK933361
LOOP AT t_hdr.
Start of MADK933361
CLEAR: v_target2.
v_zsammg = t_hdr-zsammg.
V_ZINVNO = T_HDR-ZINVNO. "MADK991565
AT NEW zsammg. "MADK991565
AT NEW ZINVNO. "MADK991565
PERFORM get_gst_value.
ENDAT.
End of MADK933361
PERFORM move_header.
CHECK t_data-zccode IN s_zccode.
IF p_det = 'X'.
CSF Project Changes Starts DEV34 MADK985782
LOOP AT T_DET WHERE ZSAMMG = T_HDR-ZSAMMG..
LOOP AT t_det WHERE zsammg = t_hdr-zsammg AND
zinvno = t_hdr-zinvno.
CSF Project Changes Ends DEV34 MADK985782
PERFORM move_header.
CHECK t_data-zccode IN s_zccode.
MOVE-CORRESPONDING t_det TO t_data.
t_data-zamountl = t_data-zamount * t_data-zexrate.
APPEND t_data.
CLEAR t_data.
ENDLOOP.
ELSE.
APPEND t_data.
CLEAR t_data.
ENDIF.
AT END OF zsammg.
CLEAR v_gsttotal.
ENDAT.
*Start of changes for IS090901289-PIA MADK991565
AT END OF ZINVNO.
CLEAR V_GSTTOTAL.
ENDAT.
*End of changes for IS090901289-PIA MADK991565
ENDLOOP.
ENDFORM.
FORM move_header.
MOVE-CORRESPONDING t_hdr TO t_data.
t_data-zttlamt = t_data-zttlamt + v_gsttotal. "MADK933361
t_data-waerk = 'SGD'.
IF NOT t_hdr-aedat IS INITIAL.
WRITE: t_hdr-aedat TO t_data-aedat.
ELSE.
CLEAR : t_data-aedat.
ENDIF.
READ TABLE t_bl WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_bl-zccode. "MADK991565
T_DATA-ZCCODE = T_HDR-ZFCODE. "MADK991565
IF NOT t_bl-zbldate IS INITIAL.
WRITE: t_bl-zbldate TO t_data-zbldate.
ENDIF.
t_data-zbl = t_bl-zbl.
t_data-type = 'DBL'.
ELSE.
READ TABLE t_di WITH KEY zsammg = t_hdr-zsammg BINARY SEARCH.
IF sy-subrc EQ 0.
t_data-zccode = t_di-zdiforcode. "MADK991565
T_DATA-ZCCODE = T_HDR-ZFCODE. "MADK991565
t_data-type = 'DI'.
ENDIF.
ENDIF.
ENDFORM.
FORM display.
IF t_data[] IS INITIAL.
MESSAGE s398(00) WITH 'No Data Selected'.
EXIT.
ENDIF.
DATA : l_repid LIKE sy-repid.
l_repid = sy-repid.
REFRESH t_catalog.
CLEAR t_catalog.
w_layout-cell_merge = 'X'.
PERFORM map_fields.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = l_repid
i_callback_user_command = 'ALV_USER_COMMAND'
is_layout = w_layout
it_fieldcat = t_catalog[]
i_grid_title = sy-title
i_save = 'A'
it_sort = t_sort[]
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.
FORM map_fields.
Sort Order
CLEAR v_count.
PERFORM sf USING 'ZDIDBL' 'X' 'X'.
Fields to be displayed
CLEAR v_count.
IF p_hdr = 'X'.
PERFORM af USING :
DESCRIPTION FIELD LEN RTABLE RFIELD
'DI/DBL ' 'ZDIDBL' '14' ' ' ' ',
'Type ' 'TYPE' '04' ' ' ' ',
'Forwarder Code ' 'ZCCODE' '14' ' ' ' ',
'BL Number ' 'ZBL' '14' ' ' ' ',
'BL Date ' 'ZBLDATE' '10' ' ' ' ',
'Invoice Number ' 'ZINVNO' '15' ' ' ' ',
'Extraction ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
'Freight Type ' 'ZTYPE' '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE ',
'Confirmation ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
'Confirm Date ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
'Total Amount ' 'ZTTLAMT' '18' ' ' ' ',
'Created On ' 'ERDAT' '10' ' ' ' ',
'Created By ' 'ERNAM' '10' ' ' ' ',
'Changed On ' 'AEDAT' '10' ' ' ' ',
'Changed By ' 'AENAM' '10' ' ' ' '.
ELSE.
PERFORM af USING :
DESCRIPTION FIELD LEN RTABLE RFIELD
'DI/DBL ' 'ZDIDBL' '14' ' ' ' ',
'Type ' 'TYPE' '04' ' ' ' ',
'Forwarder Code ' 'ZCCODE' '14' ' ' ' ',
'BL Number ' 'ZBL' '14' ' ' ' ',
'BL Date ' 'ZBLDATE' '10' ' ' ' ',
'Invoice Number ' 'ZINVNO' '15' ' ' ' ',
'Extraction ' 'ZSTATUS' '05' 'ZMSD_FREIGHT_HDR' 'ZSTATUS ',
'Freight Type ' 'ZTYPE' '05' 'ZMSD_FREIGHT_HDR' 'ZTYPE ',
'Confirmation ' 'ZCONFIRM' '05' 'ZMSD_FREIGHT_HDR' 'ZCONFIRM',
'Confirm Date ' 'ZCONFIRMDATE' '10' 'ZMSD_FREIGHT_HDR'
'ZCONFIRMDATE',
'Total Amount ' 'ZTTLAMT' '18' ' ' ' ',
'Freight Payment ' 'ZFPTYPE' '14' ' ' ' ',
'Charge Code ' 'ZCHRCODE' '10' ' ' ' ',
'Currency ' 'ZCURCODE' '08' ' ' ' ',
'Quantity ' 'ZQTY' '13' ' ' ' ',
'UoM ' 'ZUOM' '04' ' ' ' ',
'Rate ' 'ZRATE' '15' ' ' ' ',
'Amt(Foreign Curr)' 'ZAMOUNT' '16' ' ' ' ',
'Exchange Rate ' 'ZEXRATE' '13' ' ' ' ',
'Amt(Local Curr) ' 'ZAMOUNTL' '16' ' ' ' ',
'Created On ' 'ERDAT' '10' ' ' ' ',
'Created By ' 'ERNAM' '10' ' ' ' ',
'Changed On ' 'AEDAT' '10' ' ' ' ',
'Changed By ' 'AENAM' '10' ' ' ' '.
ENDIF.
ENDFORM.
FORM af USING text
field
len
table
reffield.
v_count = v_count + 1.
w_catalog-col_pos = v_count.
w_catalog-fieldname = field.
w_catalog-ref_tabname = table.
w_catalog-ref_fieldname = reffield.
w_catalog-seltext_s = text.
w_catalog-seltext_m = text.
w_catalog-seltext_l = text.
w_catalog-outputlen = len.
IF field = 'ZTTLAMT' OR field = 'ZAMOUNTL'.
w_catalog-no_zero = 'X'.
w_catalog-cfieldname = 'WAERK'.
w_catalog-datatype = 'CURR'.
ENDIF.
IF FIELD = 'ZRATE' OR FIELD = 'ZAMOUNT'.
IF field = 'ZAMOUNT'.
w_catalog-no_zero = 'X'.
w_catalog-cfieldname = 'ZCURCODE'.
w_catalog-datatype = 'CURR'.
ENDIF.
IF field = 'ZQTY' OR field = 'ZRATE'.
w_catalog-no_zero = 'X'.
w_catalog-datatype = 'DEC'.
ENDIF.
APPEND w_catalog TO t_catalog.
CLEAR w_catalog.
ENDFORM.
FORM sf USING fieldname sortup group.
v_count = v_count + 1.
CLEAR w_sort.
w_sort-fieldname = fieldname.
w_sort-spos = v_count.
w_sort-up = sortup.
w_sort-group = group.
APPEND w_sort TO t_sort.
ENDFORM.
FORM alv_user_command USING in_ucomm LIKE sy-ucomm
in_selfield TYPE slis_selfield.
DATA: lfs_data LIKE t_data.
IF in_ucomm = '&IC1'.
READ TABLE t_data INDEX in_selfield-tabindex INTO lfs_data.
CHECK NOT lfs_data-zdidbl IS INITIAL.
IF lfs_data-type = 'DBL'.
DATA: l_zdbl LIKE zmsd_diheader-zdinum.
l_zdbl = in_selfield-value.
EXPORT l_zdbl TO MEMORY ID 'VBL'.
CALL TRANSACTION 'ZMSD_BL01'.
ENDIF.
IF lfs_data-type = 'DI'.
DATA: v_dinum LIKE zmsd_diheader-zdinum.
v_dinum = in_selfield-value.
EXPORT v_dinum TO MEMORY ID 'VDI'.
CALL TRANSACTION 'ZMSD_DI01'.
ENDIF.
ENDIF.
ENDFORM.
FORM get_gst_value.
LOOP AT t_det WHERE zsammg = v_zsammg
AND ZINVNO = V_ZINVNO. "MADK991565
CHECK t_data-zccode IN s_zccode.
t_det-zamount = t_det-zamount * t_det-zexrate.
SELECT SINGLE y0mmtarget2
INTO v_target2
FROM y0mmipstranslate
WHERE y0mmdatatype = '70' AND
y0mmsource = t_det-zchrcode.
SELECT SINGLE y0mmtarget1
INTO t_det-type
FROM y0mmipstranslate
WHERE y0mmdatatype = '76' AND
y0mmsource = v_target2.
IF t_det-type NE '3Z'.
v_gsttotal = v_gsttotal +
( t_det-zamount * 5 / 100 ).
ENDIF.
ENDLOOP.
Regards,
Raj.Hello,
Following is the procedure to convert alv output to spool and then it to PDF Format.
After we display the ALV, we can check whether it is running in the background using system field u2018sy-batchu2018. Then,we call an function module named u2018GET_JOB_RUNTIME_INFOu2019 to get the current job information. Then go to spool request table tbtcp to get the spool id.
Get current job details
CALL FUNCTION u2018GET_JOB_RUNTIME_INFOu2019
IMPORTING
eventid = gd_eventid
eventparm = gd_eventparm
external_program_active = gd_external_program_active
jobcount = gd_jobcount
jobname = gd_jobname
stepcount = gd_stepcount
EXCEPTIONS
no_runtime_info = 1
OTHERS = 2.
SELECT * FROM tbtcp
INTO TABLE it_tbtcp
WHERE jobname = gd_jobname
AND jobcount = gd_jobcount
AND stepcount = gd_stepcount
AND listident <> u20180000000000u2032
ORDER BY jobname
jobcount
stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
Finally, we can call function module u2018CONVERT_ABAPSPOOLJOB_2_PDFu2018 to convert spool reqeust(which is stored in OTF format) to PDF format. Then we can call either function module u2018SO_DOCUMENT_SEND_API1u2032 or SAP BCS (Business Communication Service) to send the pdf as an email attachment.
CALL FUNCTION u2018CONVERT_ABAPSPOOLJOB_2_PDFu2019
EXPORTING
src_spoolid = gd_spool_nr
no_dialog = c_no
dst_device = c_device
IMPORTING
pdf_bytecount = gd_bytecount
TABLES
pdf = it_pdf_output
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Regards,
Sayali
Edited by: Sayali Paradkar on Apr 20, 2010 12:51 PM -
Can I insert the image file into PDF file in Adobe X Standard ?
can I insert the image file into PDF file in Adobe X Standard ?
http://matt.coneybeare.me/how-to-make-an-html-signature-in-apple-mail-for-maveri cks-os-x-10-dot-9/
-
Separate program to send a smartform converted into pdf, thru mail
Hi Folks,
I had created a smartform and converted it into a PDF format.
Now I want a separate program where in if i submit this program it should sent it throuogh mail.
Note:-<b>I want a separate program not the one where in you design a smartform,convert into pdf and then send thru mail all in one program</b>
Points will be given.
K.Kiran.hi kiran
the program is as follows
The user is provided with
a) file name
b) email address to send mail
and it sends ANY FILE (.xls,.pdf .xyz..)
Instantaneously !
4. Make two things first :
1. Include with the name : ZAMI_INCLFOR_MAIL
2. Report with the name : ZAM_TEMP147 (any name will do)
3. Activate both and execute (2)
4. After providing filename, email adress
5. Code for Include :
Data
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
CODE FOR PROGRAM
5.
REPORT zam_temp147 .
INCLUDE zami_inclfor_mail.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
regards,
navjot
reward if helpfull -
Why are images on page blinking after the OSX 10.9.3 update
Why are images on page blinking after OSX 10.9.3 update on 5/21/14?
I have finally been able to get the strobe effect stopped. I've restarted at least 7 times and each time I got the light grey screen with the darker grey apple and the spinning wheel, but not the log in box I used to get before the 5/21/14 update. But I called my son and he did some research and told me to hold down the Shift key and type in my password, even if it didn't appear in the log in box. It worked and the log in box appeared and I was able to type in my password. After doing this for each of the 7 times, on my last attempt it appears the strobe effect has been weeded out. Thank God - I thought I was going blind with it affecting every screen I was on.
I hope this will be of help to someone.
Maybe you are looking for
-
How do I delete everything on the iPod so that I can sell it?
I just purchased the new ipod touch and now I would like to sell my 30G video ipod with all songs deleted. Any suggestions?
-
I was trying to share some photos and my i photo app is frozen. i can't access it or get it to work.
I was trying to share some photos and my i photo app is totally frozen on the desktop I can no longer access i photo or the photos I was trying to share. Help!
-
Arabic PDF Report generate issue with Arabic Letters
Hi I have an issue with Arabic PDF report,its display Junk characters, where as English PDF report is working fine and Arabic Text report is working fine. I need help to fix the above issue.
-
How can i remove an app from my Iphone?
i install an app on my Iphone i dont know how to remove it.can someone help me with that?
-
Error in DTW trying to update BP master Data
Dear All I'm trying to update the BP master data with the House Bank details but i get the following error "cannot find this object in B1 Application-defined or object-defined error 65171", which does not help in correcting the actual error. What can