Why are L&R outputs uneven w/ Space Designer?

Hi,
In tweaking my studio setup, I took this approach to balancing my monitors:
I loaded the TestOsc plugin - which gave a balanced L & R output within Logic as expected; I then adjusted the amps of each monitor speaker so as to properly balance them.
Then: I un-bypassed Space Designer on the Master output (with the TestOsc running) and discovered that it (Space Des..) is strongly affecting the stereo balance - as observable at the Master Out VU meters (& speaker output). The phenomenon is different with various individual SD presets...
Why is this happening?
I'm concerned about creating my mix in a large orchestral template without an understanding & control of this phenomenon....
Thanks, Wm

Wm J Heart wrote:
Hi,
In tweaking my studio setup, I took this approach to balancing my monitors:
I loaded the TestOsc plugin - which gave a balanced L & R output within Logic as expected; I then adjusted the amps of each monitor speaker so as to properly balance them.
Then: I un-bypassed Space Designer on the Master output (with the TestOsc running) and discovered that it (Space Des..) is strongly affecting the stereo balance - as observable at the Master Out VU meters (& speaker output). The phenomenon is different with various individual SD presets...
Why is this happening?
Because Space Designer uses stereo *impulse response* files, through which the audio is processed into reverb. If you do not dial in any Dry signal (did you?) you will hear only the fully processed signal. This can vary enormously, as it is shaped by the impulse response file, which is effectively an audio file. It determines what happens to processed signal. Now if you only hear the processed signal, the differences between presets can be as big as the differences between any two audio files.
So... you may have to adjust the Dry-Wet dials on the right of the SpaceDesigner interface. to balance the reverb and the original signal.
Socalled Send presets have no dry signal dialed in, because sent signals should be fully processed and not 'double up' the original signal.
O, and on the left of the SD-interface is a slider to alter the stereo image, which can also be set to mono.
I'm concerned about creating my mix in a large orchestral template without an understanding & control of this phenomenon....
O, I also think that a test oscillator is not the best "guinea-rig" to try out a convolution reverb - unless you're seriously engineeringly measuring stuff, just try 'm with their intended instrument...
This might help:
http://documentation.apple.com/en/logicstudio/effects/index.html#chapter=12%26se ction=0%26tasks=true
I really can't tell what you know and what you don't, so perhaps unneeded, but here are some basics on send (ing) (aka "busing" or "auxing") effects:
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=9%26tasks=true
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=27%26se ction=11%26tasks=true

Similar Messages

I do not have many messages but my iphone 5s says messages take up 4.6GB of space. When comparing with friends who have many more message, less than 1 GB is being used on their phones. Why are mine taking up so much space and how do I correct that?

I do not have that many messages on my new iPhone 5s (maybe about 15 conversations and only one or two going back a little ways) yet when I go to Settings, Usage it shows that my messages are taking up 4.6GB of space. When comparing with others (some who have hundeds of messages) they are using under 1GB for their messages. Why are mine taking up so much space??

I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

Why are my apps taking up more space than what the appstore says they will? Like were talking a full GB more than what it should.

Why are my apps taking up more space than what the appstore says they will? Like were talking a half a GB more than what it should.
For example the app Modern Combat 4 says it should only be 1.58 GB on the appstore but when i go into settings>general>usage it says it takes up 2.0 GB.
Ive tried deleting the apps and then reinstalling them but they still take up so much more space.
This happens for multiple apps of mine. Some I have never even opened before.
I have an ipod touch (4th Gen)(32GB).
I link to a mac computer.
I have IOS version 6.1.3
I noticed this a long time ago but didnt need the space, Now i need the space!!
Please help!!

Because you see the file size of the compuressed file. The file gets expanded when installed and that takes up more space. Also, data is kept in the app.

Why are Apps taking up space on my Mac in iTunes when I have iCloud?

The Apps in iTunes on my Mac take up a lot of disk space. Why are they there at all? I use iCloud to backup my iPhone and iPad. iTunes Store keeps my purchase history. So, why are the Apps taking up space on my computer?

About iCloud
http://www.apple.com/icloud/
iCloud Backup and Restore Overview
http://support.apple.com/kb/HT4859?viewlocale=en_US

Why are some of my still images (jpeg) Ok in my timeline, but skewed ofter output?

why are some of my still images (jpeg) Ok in my timeline, but skewed ofter output?

Skewed? Left or right? Could you post a screenshot? What format is your timeline? What is the frame size of the JPEG?

Why are some cells in my spreadsheet higher than others? There's like extra space.

Why are some cells in my spreadsheet higher than others? There's like extra space.

DreamLife,
you can adjust the row height byt selecting the separator between rows. It is possible you made this adjustment accidentally. To se the row height to be the same as other rows select a row that has the height you want:
Then open the table inspector. Look at the row height and note the value. Now select the row (s) you want to adjust, then change the "Row Height" value in the table inspector. To view the inspect select the menu item "View > Show Inspector"

Why are my matched songs with downward arrow using mac disk space

I have 1159 songs in my iTunes library which takes up over 16 GB of space on my macbook air SSD. Of those 499 are matched with 451 showing "matched" as well as the cloud icon with a downward arrow which I thought meant that they were not stored locally and needed to be streamed. So why are those 451 taking up 4.13 GB of precious SSD space. The same situation exists with my purchased and uploaded songs which make up the other 11 GB of SSD space. If I try to delete the song I get:
“Are you sure you want to delete this item from iCloud? This will delete this item from all your iTunes Match devices".
Maybe I don’t understand iTunes Match but I thought one of the advantages was that it freed storage space on your macs and iOS deices.

So now I have completed deleting the duplicates. I’m not sure it made any difference because now the 39 songs which were greyed out and waiting have uploaded and I still have over 14GB of iTunes on my completely full macbook air SSD
58 songs are downloaded using 484.6 MB which is fine. It is the other 908 songs showing the cloud with the downward arrow which take up 13.83 GB that I want to get rid of. The only problem is that if I try to delete them I get the message:
“ Are you sure you want to delete this item from iCloud? This will delete this item from all of your iTunes Match devices.”
So how can I delete them and leave them on iCloud?
I did try something you recommended elsewhere, holding down the SHIFT and turning off iTunes Match and then adding the computer again, but there was no improvement.

Photoshop 13 why are my imported photos next to each other with no space between them as in other version

I just got the new photoshop 13. I started to import photos and each picture buts up to each other. there is no info under it and when I edit it there is no expand button next to the picture to expand the version set. How do I change this?

see In photoshop 13, why are my photos butting up next to each other with no space to show info or version set button.

Why are videos using space on my phone when there are no videos on my phone?

When I sync my phone is shows that quite a bit of space is being used by video, but there shouldn't be any videos. How do I free up that space that is supposedly being used by "video". Thanks.

ansbrad wrote:
My phone keeps giving me a notification that my storage is almost full. It looks like the photos & camera are taking up most of the space, however I only have 99 photos on the phone and photo streaming is turned off, but it still has 3.9KB used space under shared photo stream. How do I delete this?
1 gigabyte = 1024 megabytes. 1 megabyte = 1024 kilobytes.
1 gigabyte = 1048576 kilobytes.
3.9 KB is 0.38% of a MB, and 0.00037% of a GB
If your iPhone is a 8GB model, then you are literally worrying about 0.000046% of the device's total space.
Or, to look at it another way, an 8GB iPhone has 8,388,608 kilobytes of total space. Are you really concerned about less than 4 KB out of 8.3 Million?
Or... Let's say that you had $83,886.08 in your bank account. Would you worry about trying to find the nickel that rolled under the fridge?

Why are my fields not moving with my Dynamic stamp ? Only the artwork appears

Why are my fields not moving with my Dynamic stamp ? Only the artwork appears

Sounds like you're a candidate for Lightroom...based on the time you don't
want to spend in Photoshop.
Photoshop install media is likely created in large batches, perhaps in a
foreign country, so it's understandable that you get Photoshop 11.0.0 is on
the media.
I don't know as I would use ProPhotoRGB as my working space in Photoshop. I
was merely suggesting that you look at your color settings to make sure
things were the same on both machines.
How do you know your actions are the same? Did you copy the action
recording from one computer to the other, or did you merely record the same
steps on each one? Have you compared the details of each action step in the
Actions Palette to make sure they are the same? The symptoms still sound
like something different than sRGB being the output color-space, or the fact
it isn't embedded on one or the other of the computers.
How are you viewing the JPG when it looks the same or different than the
RAW? Are you looking at the side-by-side in Photoshop, or side-by-side in
Bridge, or are you using a mixture of viewers, one Adobe, and one not? And
are you using the Canon Codec on Vista or not? The Canon Codec would be
showing the camera-preview in the RAW not the RAW adjustments that Adobe has
done.
While the OS shouldn't be causing a difference in how the action is run, a
difference between OSes may make a difference in the processing to show up.
The camera profile associated with a RAW file is visible in the
third-from-right tab in ACR over at the right. The one with the little
DSLR-camera icon on the tab.
Can you attach the two JPGs on a reply, here, or if not, upload a ZIP of the
two JPGs and the RAW to a file-sharing site like http://www.rapidshare.com/
and post the download link(s)?

Why are my iTunes and iPhoto crashing every time I try to open them?

Why are my iphoto and itunes crashing every time I open them? This is a new problem on my Mac Mini. Have the latest software on my Mac Mini and the latest iLife sotware. My mac mini is about 5 years old, always kept up to date.
Processor 2 GHz Intel Core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
Graphics Intel GMA 950 64 MB
Software Mac OS X Lion 10.7.3 (11D50b)

Hello Majorie,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Also, how much Free Space is on your Hard Drive?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

Why are most of my keywords not included when I export images?

Why are most of my keywords not included when I export images?
Since starting with Lightroom 1, I've entered keywords into either of the two fields between "keyword tags" and "keyword suggestions" in the keywording panel. I was unaware that some keywords are more equal than others, or that Lightroom offered (or has added?) hierarchy support.
I recently stumbled into the news (to me) that Lightroom tags can be organized into a hierarchy, so I exported my keywords to a text file to examine. I hadn't unwittingly created any hierarchies, but an astounding fraction of the keywords were within square brackets. Sure enough, if I export an image, keywords within square brackets are omitted from the output (jpeg) file. How nice. Since I began with Lightroom 1, I've added nearly 1600 keywords.. Too bad most of them are coded wrong... so as not to accompany output that I create.
1.     What was I supposed to do, as a photographer beginning to use Lightroom, to enter keywords simply but reliably: what I type is what I get? I'd expected that's what the "just type here" interface would provide.
I especially dislike obtaining erratic results: most keywords are in square brackets, but a few are not. Of course, when I use a simplified interface, I should expect not to have access to some of the options or features. However, I shouldn't inadvertently trigger undocumented behavior.
2.     Does the Adobe reference help system say how to enter keywords simply and reliably, in its documentation of the keywording panel? I don't find my answer under the Keywords topic, within Home / Using Photoshop Lightroom 3 / Organizing photos in the catalog.
(I NOW realize that the instructions for the "Create/Edit keyword tags" dialog mention exporting. However, that's not the method I was using.)
Dick Rawson

I'm afraid that I distracted you with my background mention of hierarcharial keywords; I'm not asking about them.
I've entered keywords for several years of using Lightroom. Suddenly, this week, I find that most (yet not all) of them have the attribute of "don't include the keyword in an exported file's metadata." I never intended to ask for that; I thought all keywords will stay with the file and its offspring, and that's what I wanted.
So I'm asking:
1.     What did I do "wrong" to induce Lightroom to give the keywords that attribute? I never intended to ask it to.
2.     Where does Adobe document how to enter keywords reliably so that they stay with the file on output? I can't find that Adobe does.
> Can you be more clear about keywords in square brackets? I know when you export the keywords as a list you can get a normalized data file that uses punctuation and tabs as delimiters...
I did export the keywords into such a list: most keywords in the plain-text list have square brackets surrounding them, indicating keywords that will be omitted from metadata of any image that Lightroom exports.
My concern is not that the brackets are there. They encode the attribute of "don't include the keyword in an exported file's metadata," and recognizing that attribute concerns me.
> ...but I've never seen keywords in image files or in the interface rendered so.
I haven't, either.
Dick Rawson

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
Depending on the system version, and Office Word version:
- a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
- other kind of links where the text under display is not a URL, never work!
I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

HT201317 why are some of my photos in albums on my phone but not in photo stream

Why are photos taken with iphone in "album" but not on photostream? All setting are on.

With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
what are the pixel dimensions of the photos in question?
did you import one library into another at any time?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
how much free space on your boot drive?
OT

Why are L&R outputs uneven w/ Space Designer?

Similar Messages

Maybe you are looking for