Why are link behaviors working in my render but not my export?

When I export my video, the link behaviors don't behave like they do when I preview the video in the player window. It's like the export feature doesn't even know they're there. What's going on?

Hi Ben, thanks for helping.
I set all of the Render settings as you said, both on the Preview Canvas as well on the Export settings.
My export is still different than my preview. Here are the problems (all link behaviors):
"Link Slit Scan"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Slit Scan.Glow
Notes: In the preview, the slit scan is glowing bright white. In the export, it's completely dark.
"Link Halftone"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Halftone.Mix
Notes: In the preview, the halftone triggers along with the refraction. In the export, the halftone doesn't exist.
Extra Note: This is the same behavior that keeps changing the target to "Filters.Bad TV.Mix" when I close and reopen the project.
"Link Bad TV"
Source Parameter: Filters.Insect Eye.Refraction
Apply To: Filters.Bad TV.Waviness
Notes: In the preview, the waviness triggers smoothly along with the refraction (when the Bad TV mix is up). In the export, the waviness is jittering out of control.
By the way, Filters.Insect Eye.Refraction is controlled by an audio behavior, but the Refraction itself is working just fine.
I'll check out Ripple Training too. Thanks!

Similar Messages

Why does GarageBand audio work for guest user but not my account?

Hello, I have a 15-inch MacBook Pro (2.2 GHz Intel Core i7, 4GB 1333 MHz DDR3) from late 2011 that I bought brand new in 2012. I'm running OS X Mavericks 10.9.4 and my MacBook has 500 GB of storage.
About a month or two ago I tried to download the new GarageBand (10.0.2) but I had trouble completing the loops download. The download would stop halfway through because of a network error. So last week I decided to try to download it again, and I was able to do so after reading some discussions about the issue. I successfully completed the download in safety mode and then I restarted my MacBook. At this point I was able to open GarageBand 10.0.2 and create a new project. Unfortunately, there was no audio coming through the output and sound bar for the various audio components in GarageBand. I had no audio when previewing the loops or playing it back in an audio track. I didn't really test anything else out because I figured I needed to fix this problem first. I have read many discussion boards about audio problems with GarageBand. I have already made sure everything is set properly in the GarageBand preferences and the audio preferences in system preferences. I've tried restarting GarageBand and restarting the computer.
This evening I found a discussion from the username icewhatice and they seemed to have had my exact problem. I'm not sure that I found the answer on this discussion though. For reference, this is what icewhatice posted: "I have no audio coming from Garageband 10.0.2. Downloaded it on Saturday and have spent the last two days trying to figure out why it won't work. I'm using a macbook pro with an Alesis QX49. GB registers keyboard when I plug it in but no sound whatsoever, not even from the onscreen keyboard. It seems to read the keyboard as if I play a C chord, it appears in the display. I've done all the obvious stuff like check preferences, restart, I've deleted and downloaded new GB several times and always with same result. Actually, it took me about four attempts to download it in the first place as I was getting an internet connection error message right at the end of the download, and I see others have had that problem. Managed to solve that by downloading in safe mode but now the no sound thing is driving me absolutely crazy because I can't play my keyboard!!!!! Also, worth noting that there is no audio level being read anywhere, I believe in the new version this appears in the volume control at the top. I've also looked into it potentially being a problem with my keyboard and it possibly needing an update but can't find any difinitive answer for that anywhere. I've stopped looking into that because the on screen keyboard doesn't even work - if that worked then I would know at least GB works and it's something to do with the keyboard. So, I am at a complete loss. If anyone has any ideas about why this is happening or what I could do to solve then I would be very grateful."
After reading this, I realized that I am unable to create new tracks, and I realized that I have the same problems with old projects saved from the last version of GarageBand I had. I have not tried to download GarageBand again since it did not work for icewhatice. léonie ended this post by saying: "Something is certainly wrong - either the current project, some settings in your user account, or the downloaded GarageBand version. Or incompatible software may be interfering. If a new project does not work, try to test by logging into a different user account, for example the "Guest User" account. Create a new project using this account. Does GarageBand work better from this account? Then we will need to troubleshoot your preferences."
I have tried this and started a new GarageBand project in the "Guest User" account. GarageBand was working fine in the "Guest User" account and all of the audio was working properly. Does anyone know how I should troubleshoot my preferences?

If an application is working in a different account, but not in your regular account,try t find out, what you configured differently in your own account, for example start-up items or preference panes you are using, applications and other helper tools, that are only installed for your regular account. As a first guess, remove GarageBands preference files from the user library in your Home folder.
But you will have to reset all settings you did in the GarageBand preferences dialog. And GarageBand will not remember the last project. You'll have to find the file manually.
Remove these files from your User Library to a folder on your Desktop:
~/Library/Containers/com.apple.garageband10/
~/Library/Preferences/com.apple.garageband.plist
~/Library/Caches/garageband
Quit GarageBand, then remove the files to a folder on the Desktop and restart the computer, before trying again to open GarageBand.
You user library may still be hidden, as is the default in Mavericks: To open your hidden user library:
Select the "Home" folder icon (the little house) in the Finder's sidebar and press the key combination ⌘J to open the "view options".
Enable "Show Library Folder".
Then open the Home folder and open the Library folder inside and navigate to the Preferences, Caches, or Containers folder. Remove these folders completely - don't leave anything inside: ~/Library/Containers/com.apple.garageband10/,
~/Library/Caches/garageband .

Wireless video link example works with antenna only but not with SMA to SMA cable

I am trying to run wireless video link example https://decibel.ni.com/content/docs/DOC-22728 . It works fine if I use install antennas on my Tx and Rx USRPs. But it does not work if I use SMA to SMA cable to connect Tx and Rx USRPs. Can somebody guide me what is the reason why it is only workng with antennas but not with SMA to SMA cable.
Thanks
JK

I connect the 30 dB attenuator at RF input port of Rx USRP. But it does not work completely.
Without connecting attenuator i was not able to receive any thing on my Rx VI although it shows waveform. But after connecting attenuator receiver some times receive text messages and some times not. Also it does not work at all for images and for video it works partially but gives some error related to memory full after few mins.
I want to know why this example works completely without any problem if I use antennas, and why it does not work perfectly if i use sma to sma cable for connecting transmit and receive usrps.
Please guide
Thanks
JK

Why Does Spongebob Typing Work at Apple Store But Not at Home?

I had read reviews warning that The Learning Company/Broderbund/Encore SpongeBob Typing was incompatible with Leopard and/or Intel Macs. When I went to my Apple Store to get some typing software for my daughter, they recommended the app to me, and I auditioned it without issues on the store's (Intel, obviously) children's-area iMacs running 10.5.6.
I bought it, brought it home, and it won't run properly at all on either of our Intel MacBooks. It runs fine on the G5 my employer has loaned me, though that's not available for regular personal use. All of our machines run 10.5.6, so, er, huh? How come it works in the store on their Intel machine?
Today I visited a second Apple Store, also running SpongeBob on their kids iMacs, and noticed they're actually running a slightly-renamed "Spongebob Typing and Spelling," a version that's not exactly the one they sold me after all, and here's an even weirder thing: It doesn't seem to be available for sale anywhere. I see no sign it exists except on the Apple Store iMacs.
Can anyone shed some light on this?

It's almost the same. I have a slightly different box, and the Apple Store sticker refers to it as the "2008" version of the program. I read the earlier post with interest.
Am I absolutely sure that the Apple Store iMacs are Intel and running Leopard? No, but it's really hard to imagine they're not. They sure look like current iMacs, which means Intel, unless there are some secret PPC glass iMacs, which, seriously... And after posting my first email I'm thinking Leopard's not the issue since it runs on the 10.5.6 G5 (Hm, if Leopard's not the issue, where should I be posting this? Moderator, help?)
Also, as I say, the version they're running adds "and Spelling" to the title—it seems otherwise identical as far as I was able to tell—so I'm increasingly thinking the store's demoing one thing and selling another. Maybe the vendor has given Apple a pre-release of an upcoming, unannounced version it hasn't quite gotten around to releasing. Maybe (I'm hoping this) there's a patch available in some obscure place.

Audio ducking working in aperture preview but not in exported video

I'm using a mix of stills and video and the soundtrack level ducks during the videos when in aperture, but when i export the movie, both the video clip and soundtrack audio are at 100%
I've tried exporting to a few of the different presets and it makes no difference.
Anyone have any ideas?
I'm on aperture 3.1.2 on 2x2.8 quad core mac pro

I think this is just a glitch - I duplicated the project and when I click on the video clips in the duplicate the ducking control slider had re-appeared, and the sound was as expected on export.

Why is the wifi working on my mac but not on my other devices?

The mac i have is connected to the wifi and is working just fine, but my other 5 devices are not working with the wifi network that i have with the AirPort and my TimeCapsule. they were working fine the other day and just stared to act up... i already reset the time machine but that didnt fix anything.

Describe the whole network.. how are the airport and tc linked. What mode are they running in?
I would reset the wireless to conform to SMB rules.. which are much more compatible with modern Apple equipment for some reason.. to say nothing of the rest of the world.
Make all names short, no spaces.. pure alphanumeric.. absolutely no apostrophe.. that apple corruption.
Fix and lock the wireless channels. I would set different name for 5ghz to keep everything honest. Stop voodoo auto settings.
Use WPA2 Personal security only.
(SMB name should extend to TC itself ie its network name and the hard disk.. apple used a mixture of names but it should have no spaces.. short.. TC Disk is wrong.. TCDisk is fine. Apple often use spaces where they shouldn't).

Why will iTunes Match work on my iPhone, but not on my MB Pro?

I have an annual Match subscription which I downloaded onto my MacBook. I then enable Match on my iPhone and it works properly. However, when I try to turn Match ON on my MacBook, it displays an ad asking me to subscribe again. I can play the iTunes Radio just fine, except for the commercials, which is why I subscribed to Match in the first place. I'm sure there's a step I'm missing somewhere. Any help is appreciated.

Hi,
Have you signed into iTunes using same Apple ID before turning on match on your computer?
Did you subscribe to match from your iPhone or your computer?
Jim

Unable to use all the feature of my email service (Juno on the web) like; font size/color, bolding, italics, highlighting etc why? Those features work through Internet Explorer but not Firefox.

When I go to my Juno on the web through Firefox, I am unable to use the tool features such as:
Font size / Color
Bolding
Italics
Bullets
Highlighting
just to name a few. Yet when I bring it up through Internet Explorer these features work, plus the way Firefox reads my Juno the tabs are distorted (the page is not formatted correctly, I contacted Juno they said I should contact my modem company AT& T they said no so you are my last resort.. Please help resolve my issue, THANK YOU in advance for assisting with this matter.

It is up to Juno to enable Midas, the Rich Text Editor which is built into Firefox, with one little line of code on every web page that has RTE for IE. There's nothing that you can do to turn that feature on your self, it has to be coded on each web page that has Rich Text Editing.
http://www.mozilla.org/editor/midas-spec.html <br />
http://kb.mozillazine.org/Midas
Their ignorance probably lies with their staff programmers only knowing how to do it for IE ''(their training and certificates are probably from the Microsoft cabal)'', and not realizing that Gecko and WebKit apps each have their own Rich Text Editor's, which require their own small line of code to enable those Editor's.

Why does the query work in SQL Developer, but not in APEX?

Hi, guys:
I have a silly question. I have a complicated query, and I tested it successfully with SQL developer, and result is correct. However, when I put it into APEX to generate a report, it always reports no data found. I also know the condition related to "other marks" select list in the where clause part causes this problem. It also looks strange: before I add this condition, everything works OK; after I add this condition, even I do not choose the "other marks" select list, other components do not work neither. I always got no data found result. Could anyone help me on this problem? You can also visit our developing site as http://lsg-solutions.com:8888/apex/f?p=206 to check the problem.
Thanks a lot
Sam
select distinct 'MAP','Detail',so.doc_number as "DOC Number", so.offender_id as "Offender ID", so.first_name||' '|| so.middle_name||' '||so.last_name as "Offender Name",
so.date_of_birth as "Date of Birth",
(select sc1.description from sor_code sc1 where sc1.code_id=so.race) as "Race",
(select sc2.description from sor_code sc2 where sc2.code_id=so.sex) as "Sex",
(select sc8.description from sor_code sc8 where sc8.code_id=so.hair_color) as "Hair Color",
(select sc9.description from sor_code sc9 where sc9.code_id=so.eye_color) as "Eye Color",
replace(replace(nvl2(sl.address1, sl.address1||' '||sl.address2 ||' '||sl.city ||' '||sl.county||' '||(select sc3.description from sor_code sc3 where sc3.code_id=sl.state)||' '||sl.zip, 'No Known Address'),'#'),',') as "Address",
replace(replace(nvl2(sl.physical_address1,sl.physical_address1||' '||sl.physical_city ||' '||sl.physical_county||' '||(select sc4.description from sor_code sc4 where sc4.code_id=sl.physical_state)||' '||sl.physical_zip, 'No Known Address'),'#'),',') as "Physical Address",
sl.status as "Status",
sl.jurisdiction as "Jurisdiction",
to_char(sl.ADDRESS_LATITUDE) as "Address Latitude",to_char(sl.address_longitude) as "Address Longitude",
to_char(sl.physical_address_latitude) as "Physical Latitude",to_char(sl.physical_address_Longitude) as "Physical Longitude",
decode(rox.habitual, 'Y', 'Habitual', '') as "Habitual",
decode(rox.aggravated, 'Y', 'Aggravated', '') as "Aggravated",
rox.status as "Registration Status",
rox.registration_date as "Registration Date",
rox.end_registration_date as "End Registration Date"
from sor_location sl, sor_offender so, registration_offender_xref rox, sor_last_locn_v sllv
where rox.offender_id=so.offender_id
and sllv.offender_id(+)=so.offender_id
and sl.location_id(+)=sllv.location_id
and rox.status not in ('Merged')
and rox.reg_type_id=1
and upper(rox.status)='ACTIVE'
and nvl(rox.admin_validated, to_date(1,'J'))>=nvl(rox.entry_date, to_date(1,'J'))
and (((select sc11.description from sor_code sc11 where sc11.code_id=so.race and sc11.description=:P5_SL_RACE) is not null ) or (:P5_SL_RACE is null))
and (((select sc12.description from sor_code sc12 where sc12.code_id=so.sex and sc12.description=:P5_SL_SEX) is not null ) or (:P5_SL_SEX is null))
and (((select sc13.description from sor_code sc13 where sc13.code_id=so.hair_color and sc13.description=:P5_SL_HAIR_COLOR) is not null ) or (:P5_SL_HAIR_COLOR is null))
and (((select sc14.description from sor_code sc14 where sc14.code_id=so.eye_color and sc14.description=:P5_SL_EYE_COLOR) is not null ) or (:P5_SL_EYE_COLOR is null))
and (( so.offender_id in(select sm.offender_id from sor_code sc15, sor_mark sm, sor_offender so1 where sm.offender_id=so1.offender_id and sc15.code_id=sm.code and sc15.description=:P5_SL_OTHER_MARKS and sm.description is not null)) or (:P5_SL_OTHER_MARKS is null))

My suggestion would be to put some instrumentation into your query and see what values you are using.. Or even simpler take out ALL the where clauses you can until data starts to sho wup and then add them back in one at a time until you find the culprit..
My bet would be on any date comparisons you are doing between page items and database columns..
Thank you,
Tony Miller
Dallas, TX

Why will a query work in SQL Developer but not in Apex?

Here's a good one. I created a dynamic LOV with the following query.
select
e.DESCR d,
ee.ENTRD_EVNT_SK r
from
PT_EVNT_IN_DIV eid,
PT_ENTRD_EVNT ee,
PT_EVNT e
where ee.PGNT_SK = :PGNT_SK
and ee.CNTSNT_SK = :CNTSNT_SK
and ee.EVNT_IN_DIV_SK = eid.EVNT_IN_DIV_SK
and eid.EVNT_SK = e.EVNT_SK
and ee.ENTRD_EVNT_SK not in
(select js.ENTRD_EVNT_SK
from PT_JDG_SCR js
where js.JDG_SK = :JDG_SK
and js.PGNT_SK = :ai_pgnt_sk
and js.CNTSNT_SK = :CNTSNT_SK)
order by 1
The query works fine in SQL Developer, but Apex gives the following error when compiling it in the LOV editor.
"1 error has occurred
- LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query."
I tried rearranging the entries in the From clause, but that didn't do any good.
Do you see what I can do to make Apex accept it?
Thanks,
Kim

Kim
Kim2012 wrote:
select
e.DESCR d,
ee.ENTRD_EVNT_SK r
from
PT_EVNT_IN_DIV eid,
PT_ENTRD_EVNT ee,
PT_EVNT e
where ee.PGNT_SK = :PGNT_SK
and ee.CNTSNT_SK = :CNTSNT_SK
and ee.EVNT_IN_DIV_SK = eid.EVNT_IN_DIV_SK
and eid.EVNT_SK = e.EVNT_SK
and ee.ENTRD_EVNT_SK not in
(select js.ENTRD_EVNT_SK
from PT_JDG_SCR js
where js.JDG_SK = :JDG_SK
and js.PGNT_SK = :ai_pgnt_sk
and js.CNTSNT_SK = :CNTSNT_SK)
order by 1
The column named ENTRD_EVNT_SK is used twice in a select. Once in the main select and once in the inline query.
The validation maybe choking on that.
Try giving the column in the inline query an alias and see if that helps.
Nicolette

Why are itunes downloads so slow on PC but not on mac?

Downlaods for movies take 5+ hours on PC. Mac takes 15 min for the same movie. I just dont understand Computers are on the same network. I have tried just about everything. DNS, firewall, fresh install of OS. I have 45 download speed and do not have any problems on other sites. I have contacted apple, but they don't want to talk to me because its a PC..
DELL XPS 2.6 12 gigs RAM
Macbook pro 2.0 ghz 8gigs Ram....
Can anyone help or have any suggestions.

I am using Safari and Internet Explorer for mac & is connected too internet with my ADSL modem (0,5mbit). The problem is that webpages at random does not work. It can be apple.com, Cnn.com, etc. Any webpage at all. Webpages that is working without any problems att all when I use my PC

Why do layer styles work with track mattes but not stencils?

I'm just wondering what's going on "under the hood."
-- Jeff

In addition, Track Mattes work only on the single layer above the layer with the Track Matte applied not on 20 layers.
I never said something else.
I don't agree that a stencil is a group of layers
They are. Stencils operate on comp buffers, mattes on layer buffers. It's simply tech stuff. Accept it as it is. No point in going insane over such minutia. Layer styles are pretty useless most of the time, anyway, due to how they are applied.
Mylenium

Why does my wifi work with my dell but not my new Imac?

Hey,
I was wondering if ya'll could help me. My wifi won't work as fast on my Imac. It works on my dell laptop real fast but for some reason it goes super slow on my new Imac 21 inch. Please help.
-Thanks

Apple has released an update for recently released Mac systems that improves compatibility when using 5GHz Wi-Fi frequencies. The update is recommended for all "late 2012" Macs.
Mac Wi-Fi Update 1.0 can be downloaded from Apple's support site or through the Mac App Store on affected Macs.
About Mac Wi-Fi Update 1.0 This update is recommended for all late 2012 Mac systems. This update improves compatibility when using the 5GHz band in Wi-Fi. Boot ROM or SMC Version Information: To confirm the update has been applied, the CFBundleVersion string of the AirPortBrcm4311.kext will need to be checked. New driver delivered in update: AirPortBrcm4331.kext CFBundleVersion = 612.20.15

Why do these features work on Win7 (Bootcamp),but not in Osx on my 27" iMac

Hi, ever since I bought my iMac 1 year ago I have been annoyed at 2 issues.
- Cannot turn off main display (and backlight) when using secondary display
- Switch between external audio and internal speakers when having a 3.5mm-plug plugged in.
I had the understanding that both of these were hardware related issues, and that there's no idea to google anymore about the subject.
And guess if I was surprised after installing Windows 7 on Bootcamp and found out that both of these issues worked as I wanted right out of the box!?
Would it be possible to tweak the osx drivers to support this before apple officially will support it?
Thanks!

There is no way to do this and I don't believe Apple would view this as an "issue"; in my humble opinion, it is because iMacs have a gorgeous display (your choice of 21.5 or 27") and therefore were not necessarily designed to be used with a second display, whereas laptops were - hence the available option to use it in clamshell mode:
http://support.apple.com/kb/HT3131
Edit: You can create a totally black image and use that as your desktop picture if you like.
Message was edited by: Barbara Daniels1

Effect works in the preview, but not after export. (10.1.1)

Hi all.
I am new to FCP, making a simple slide show movie with some Ken Burns images, music and titles. For one image there is some color correction, Ken Burns, and I want the image to fade from Black and White to Color. I did this by adding the Black and White effect, choosing "show video animation" in the timeline and making the B&W effect gradually decrease. It works perfectly in the preview, but when I share the video, the effect is always missing (it just stays B&W). I have tried:
Undoing and redoing the effect
Exporting to different formats
Turning off background rendering and deleting render files
to no avail. Any thoughts?
Thanks in advance!

I'm hoping to avoid updating until after this movie is delivered. I find it best not to tinker with stable software mid-project. Maybe if I get desperate enough I'll give it a whirl, though.

Why are link behaviors working in my render but not my export?

Similar Messages

Maybe you are looking for