Why are my 5D Mark III raw files pink?

Hi,
For an upcoming job, I'm testing a client's capability to open raw files from my 5D Mark III.  Whenever the client opens any of my raw files, they show up pink like the one above.  Client is using Photoshop CS6 on OSX and has run the software update for compatibility with the 5D Mark III.  I directed the client to install the Camera Raw Release Candidate 7.1., and after doing so, still has the pink files.  The files are not corrupted; they open fine on my Windows 7 Photoshop CS5. Any ideas how to resolve this issue? 
Thanks.

Camera Raw Defaults are per camera and perhaps they are set strangely for the 5D.3 on your client’s computer.  In particular check the Green channel in the Point curve in Toning Curve.  I can easily create a very-magenta image by setting the toning curve to Point and selecting Green rather than RGB for the Channel and dragging the center of the curve all the way to the bottom to remove all green from the image.   The camera profile might also be corrupt, which can be tested by switching to some of the others to see if they look ok.
You can isolate whether it is your camera, in particular, or any 5D.3 raw file by having your client download and look at a RAW file from the following page—by clicking on the word RAW under the 5D.3 image at the top left of the series on this page:
http://www.dpreview.com/reviews/canon-eos-5d-mark-iii/28
This is the direct download link to the ISO 100 studio image for the 5D.3 is:
http://movies.dpreview.com.s3.amazonaws.com/canon_eos5dmkiii/5D3_5199.CR2.zip
You might also try converting one of your CR2 files to DNG and make some adjustments, then update the preview and metadata into the DNG, so your client will be using your settings, rather than the defaults.

Similar Messages

  • EOS 5D Mark III Raw Files

    Is there are Camera Raw plug-in for PSE 10 that will work with Canon EOS 5D Mark III raw files,

    You can download and install latest ACR 6.7 from the link
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5383
    [MODERATOR: Updated above link, which was to download Adobe Camera Raw for Photoshop. The updated link to to download Adobe Camera Raw for Photoshop Elements]
    It supports new cameras :
    Canon EOS 1D X
    Canon EOS 5D Mark III
    Canon PowerShot G1 X
    Canon PowerShot S100V
    Fuji FinePix F505EXR
    Fuji FinePix F605EXR
    Fuji FinePix F770EXR
    Fuji FinePix F775EXR
    Fuji FinePix HS30EXR
    Fuji FinePix HS33EXR
    Fuji FinePix X-S1
    Nikon D4
    Nikon D800
    Nikon D800E
    Olympus E-M5
    Pentax K-01
    Samsung NX20
    Samsung NX210
    Samsung NX1000
    Sony Alpha NEX-VG20
    Sony SLT-A57
    Message was edited by: Brett N

  • I just upgraded from LR 3.6 to 4, I can't get 4 to open canon mark iii raw files.?

    I just upgraded from LR 3.6 to 4, I can't get 4 to open canon mark iii raw files.?  Also, does CS5  not read Canon 5D Mark iii files either?  thanks

    For Cs 5, please use the latest version of Camera raw. Cannon 5D Mark III is supported on Camera raw 6.7. Update the software or download install the camera raw 6.7 from the Adobe Website.
    Lightroom 4, please wait for the next update of camera raw for the support of Cannon 5D Mark III. You may try using the beta version of Camera raw 7.1 available on Adobe labs.

  • Cannot import Mark III RAW files w LR4

    I just upgraded to LR4 but still cannot import my Canon 5D Mark III raw files. Any suggestions??

    You'll need 4.1 or later.  Check for updates.

  • 1ds mark III raw files

    Hi folks,
    I use to work with Canons 1Ds Mark III raw files (all about 21MP or more).
    Using Quick Preview mode everything runs fine in terms of speed.
    But as soon as adjustment mode is used it takes up to 10secs to laod the raw files. (Loading...)
    Comparing this to the latest DPP Version or Capture One 4.1 this seems to be an incredible long time as the other apps take 2 to 3 secs to show the raw file.
    What's going on here? I suppose this to be a raw decoding issue rather than a hardware issue???
    Anyone else similar experiences ?
    kind regards Frank

    i work the same files on my G5 and usually wait a few seconds to load ... soon i will upgrade to a new MacPro, but this old beast has been great for me, and i am not sure how to break it to her that i want to "trade" her in for a newer model ...
    i've also heard the the ati is better .. there has been talk of it here on this board, also check out barefeats.com to see what tests they have done ...
    tidy in wisconsin on a rainy and drab friday morning ...

  • My 5d Mark III raw files are showing up as CRAW2 not CR2?!

    I have tried resetting my camera settings to default, formatting the CF cards, using multiple card readers...nothing is working and I can't seem to find any information on what a CRAW2 file is. I have also tried using a DNG converter to convert the files but that doesn't work either. No program recognized the raw file type.

    Camera Raw Defaults are per camera and perhaps they are set strangely for the 5D.3 on your client’s computer.  In particular check the Green channel in the Point curve in Toning Curve.  I can easily create a very-magenta image by setting the toning curve to Point and selecting Green rather than RGB for the Channel and dragging the center of the curve all the way to the bottom to remove all green from the image.   The camera profile might also be corrupt, which can be tested by switching to some of the others to see if they look ok.
    You can isolate whether it is your camera, in particular, or any 5D.3 raw file by having your client download and look at a RAW file from the following page—by clicking on the word RAW under the 5D.3 image at the top left of the series on this page:
    http://www.dpreview.com/reviews/canon-eos-5d-mark-iii/28
    This is the direct download link to the ISO 100 studio image for the 5D.3 is:
    http://movies.dpreview.com.s3.amazonaws.com/canon_eos5dmkiii/5D3_5199.CR2.zip
    You might also try converting one of your CR2 files to DNG and make some adjustments, then update the preview and metadata into the DNG, so your client will be using your settings, rather than the defaults.

  • Camera Raw 7 does not recognize Canon 5D Mark III RAW files

    Hello,
    I have Adobe Creative Cloud installed and I use Adobe Photoshop CS6 with Camera Raw 7. Photoshop nur Bridge CS6 do not recognize the RAW files from the Canon 5D Mark III, though it says on the Adobe support site that the camera is supported since Camera Raw 6.7
    When I try to open the .cr2-File I get the message "Photoshop cannot open the file".
    I use Win7 (64 Bit).
    Any help?
    Thanks in advance,
    Robert

    Hi Robert,
    Its a known issue as the PS CS 6 was launched with ACR 7 however the support in Photoshop CS 6 would come with ACR 7.1 update which will be live soon.
    You are completely right in saying that Canon 5D Mark III was supported in ACR 6.7 but it was only intended for >PS CS 5 & 5.1.
    In the meanwhile if you want you can download the RC version of ACR 7.1 from labs.adobe.com.
    Thanks
    Mandhir

  • Will Canon 5d Mark III Raw files work with Lightroom 3

    I have just tried to upload Raw files from a Canon 5d Mark III to Lightroom 3.  The file were not recognised.  I believe there were some update issues but my Lightroom 3 is updated.  Do I need to get Lightroom 4?  I need to know urgently as I have a shoot tomorrow and will go back to my Mrk II if I can't get an update for Lightroom 3.
    Message title was edited by: Brett N

    LR3 DOES NOT support Canon 5D3, 1Dx, Nikon D800 or Nikon D4.
    Newer cameras wont work in it, and require LR4 for RAW processing (Tethering in LR4 STILL is not supported)
    However,
    LR4 is massively buggy, and slow to a point where it is practically unuseable for anything other than a handful of images to edit.
    Also, LR4 will not tether to the new cameras (for that, try ANY of the competing professional software, Aperture, Capture One - They work just fine)
    You can, convert your 5D3 files to DMG, and then open them in LR3 that way, or you can get LR4 and deal with it's massively awful slow issues that Adobe has still not resolved 5.5 months after launch, or you can use other software.
    Those are your options.

  • How to open Canon 5D Mark III Raw files in PSE 9? [was:Updates]

    I am unable to unpdate my PS E2 PSE 9 to support my Canon 5D III.  I am using a laptop.  What should I do?

    Your CR2 files are not supported in PSE2. You can download and install the free Adobe DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.4
    Mac download (.dmg file) click here DNG Converter 8.4
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Need to add the patch for Canon 5D mark III raw files to Photoshop. Where can I find it?

    Hi Friends,
    I am editing on my lap top for the first time since buying the Canon 5D Mark 3. My Photoshop (5.5) does not recognize the
    raw files. Where can I download the update?
    Thanks in advance,
    Esther

    The 5D Mark III was also supported in Camera Raw 6.7
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    which is compatible with CS5
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    In CS5 click Help > Updates should install Camera Raw 6.7.
    If not, download it manually
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5603

  • Canon 5D Mark III Raw Files Not Viewable in Finder for Snow Leopard 10.6.8

    System specs:
    Computer: Mid 2008 Mac Pro - Dual Quad Core
    OS: OS X 10.6.8 (includes the most recent Digital Camera Raw Updates)
    Camera: Canon 5D Mark III
    Problem:
    Finder can not preview the thumbnails from this camera.  While not that big of a deal (I can use Lightroom, Bridge, etc to view these) it is a bit of an annoyance when transfering files around from one volume to another.
    According to this Apple support page -   http://support.apple.com/kb/HT3825?viewlocale=en_US&locale=en_US   -  I may need to update iPhoto, in order for the Digital Camera Raw Updates to work (specifically 3.12 from last year that addressd the 5D3's raw files).
    As a pro photographer, I have ZERO use for iPhoto.  But, I would be willing to spend the $15 for the newest version of iPhoto, if I knew that would solve the Finder thumbnail problem.
    I would love a definitive answer, without having to call Apple and paying the "per-incident support fee."

    I manually installed the latest RAW update (3.13 I think - for 10.6.8) .... worked for me.
    (auto-update didn't do **** about raw update)
    now aperture and os-x (10.6.8) show the 5dmk3 raw's.

  • Canon 5D Mark III raw files

    Just bought the Canon 5D Mark III, LR will not read the RAW files, advise please

    http://forums.adobe.com/thread/1006883
    http://forums.adobe.com/thread/1006869
    http://forums.adobe.com/thread/1007658
    http://forums.adobe.com/thread/1007846
    Just in the last 24 hours.
    This forum would be half the size if people looked/searched before posting...

  • Cannot open 5D Mark III raw files in CS6

    I am running CS6 from disc. I just got a new laptop. Its a  Toshiba Qosmio. I have loaded the whole program from disc and every time I try to open a raw file, It comes up with a message that I need to update Camera Raw. I have done all the updates and still no luck. I am also using a 5D Mark III. Any suggestions before calling India and trying to decifer the language?

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    The 5D Mark III was first supported by Adobe Camera Raw 7.1.
    CS6 ships with Camera Raw 7.0 but is updateable to 8.5 depending on your operating system.
    In Photoshop click Help > About Plug_ins > Camera Raw and see which version you've got installed.

  • 5D Mark III RAW Files with LR 4.1RC - Cross Pattern Noise

    While processing a images from this past weekend taken with the 5D Mark III... Images taken at high ISO (6400 and 12,800) with no noise reduction show a very clear criss-cross pattern across the image faintly. Once you apply about 20 on the NR slider, it will go away. I do not see this with the in-camera JPEG's or with Canon's DPP software with no NR applied to the RAW files. Is this a known issue that will be corrected for the final release of 4.1?
    Here is a crop showing this happening. It is not limited to just dark or light parts of the image, but the entire thing.
    [IMG]http://i258.photobucket.com/albums/hh280/invertalon/6M3C3258.jpg[/IMG]

    I believe with previous problems people reported them here:
    http://feedback.photoshop.com/photoshop_family
    However, if you don't want to deal with that you could always PM Eric Chan.  This is people page here:
    http://forums.adobe.com/people/MadManChan2000
    Just click on the "Send Private Message" link under "Actions" on the right and point him at this thread.  He can probably pretty quickly tell you if your RAW file will help them out or not.

  • Element 10 and Canon 5D Mark III RAW file

    My Element 10 can read my Canon 40D RAW files but not the 5D Mark III ones. I downloaded Element Camera RAW update 6.7 and updated Adobe App Manager but could not install the former. An error message indicates that this extension does not apply. Any idea how to address this issue? Thanks.

    Hi Sumit,
    Indeed, according to Adobe download assistant, Element 10 with Camera RAW 6.7 update should work.
    The error message is "Echec de la mise à jour" (in French) which means Update Failure. Reason given is "this update does not apply to your case".
    Thanks for your assistance,
    Raw

Maybe you are looking for