Why are my exported files not going to me email? I have used 3 different ones.

Why are my exported files not going to my email (receipts & business card)? I have used 3 different ones...2 yahoo and 1 hotmail. I have checked spam box also.

For the Receipts app I chose to export the info as a PDF file..an email was requested..I entered info and clicked send. For the Business Card app I chose Send, not Print..an email was requested..I entered info and clicked send. I haven't received anything, not even in my spam folder.

Similar Messages

I keep getting the message sync complete but my ipod nano 3rd generation is not syncing any ideas. I have used 3 different cables, reinstalled itunes

I keep getting the message sync complete but my ipod nano 3rd generation is not syncing, any ideas. I have used 3 different cables, reinstalled itunes to the latest version. My nano shows in the side bar of i tunes

There are instructions for starting it on this page : http://support.apple.com/kb/TS1567

Why are my exported files so small with lightroom 3?

I have been editing 10 mb raw files and they are no bigger than 2 mb jpegs afterwards.why is that?
i have been using presets while editing and i reset all settings at some point as my crop tool wasn't working properly.the resolution slider in the export window is at 100%, 240 pixels per inch, and everything else seems to be the way it was before.What am i doing wrong? I used to get much bigger exported files, cca 7-8 mb.

emi ion wrote:
I have just imported raw file from my camera, taken at a full resolution of 21 MP. The raw file has about 23mb and the exported jpeg without the resize to fit box ticked 7 MB. I uploaded the photo on the website and it's still not good enough for a 20''x30'' print. I am not sure if other websites accept other formats than jpeg, as this one doesn't. Not that i want to use them but it was the easiest way for me to check.
I am not sure if my client will want a canvas print, i am only assuming they might as they did in the past and i want to know what to do if that happens. I read that genuine fractals 6 pro is good, enlarges about 4 times the original size.
The ppi image resolution required for "handheld" print viewing is higher than that for pictures to be hung a wall and viewed at a distance of three feet or more.
The ppi image resolution required for a large canvas print is even lower, with good results obtainable a 100 ppi. Canvas prints have a textured surface that reduces the print resolution and doesn't require as high ppi image file. Print houses use RIP engines that process the image file for both paper profile and printer native resolution. These RIP engines use very sophisticated "upscaling" algorithms, which are as good or better than a photo editing software application such as LR and Genuine Fractals. Because of this it is advisable not to upscale image files to meet a specific printer resolution such as 300 dpi.
Your 21 mp image files (5184 x 3456) at 100 ppi equates to a 50" x 33" canvas print with edge wrap. Many print houses only accept sRGB profiled JPEG files, but exporting from LR with 100 Quality you create a virtually lossless JPEG image file. You should have no difficulty producing a high-quality canvas print from a well processed 21 mp raw image file up to 50" x 33" in size.
For enlargements on regular photo paper 150 ppi minimum is required for good results. For your 21 mp image files this equates to 35" x 23," so there should be no problem printing 20" x 30" enlargements for framed wall mount viewing.
What website gave you the "still not good enough" message for the 20" x 30" print and what is the actual resolution (???? x ????) of the JPEG file you uploaded? Reimport that JPEG file into LR to see the resolution if necessary.

Why are my ".pdf" files not opening in Creative Cloud? The tumbril shows up as a blank page!

I just switched over from Adobe Acrobat Cloud to Creative Cloud; a tedious task. Most of my files open up fine, but some of them show up as a blank page thumb nail. They do have ".pdf" extension. Any ideas as to why this is happening, and what I can do to correct the issue?
Ty

@masood131 - A few questions:
Are the pdf files without a thumbnail password protected? (Probably not but just checking since we will not be able to provide a preview for such a file).
If you click on the blank thumbnail to view the individual file page do you see a larger preview image, or is that blank too?
If you refresh the browser page does the thumbnail image show?
If you upload the file a second time do you see a thumbnail image?
If there is a problem with a specific file feel free to share a link with me via a private message and I can investigate further.

Why are all jar files not compressed in the JRE installer?

I used 7zip to unpack jre-6u12-windows-i586-p.exe (Oracle JRE Installer). On unpacking, I got a core.zip, a zipper.exe and a few other files.
Again on exploding core.zip I found a few things. core.zip contains all the jar files just like it would be after installation except for 7 jar files.
charsets.jar
deploy.jar
javaws.jar
jsse.jar
localedata.jar
plugin.jar
rt.jar
Instead of these jar files there exists the corresponding packfiles
charsets.pack
deploy.pack
javaws.pack
jsse.pack
localedata.pack
plugin.pack
rt.pack
I think these are files created by pack200.exe & unpack200.exe is run on them after installation to create the corresponding jar files.
So now I have a few questions
Why are only these 7 files run through pack200.exe. I assume its because they are bigger than other files. But it wouldn't take that much effort to pack all jar files & unpack them after installation.
The .pack extension suggests that these are packed but not gzipped. Again why would Oracle not do a gzip also? for eg with rt.jar packing reduces size from 45 MB to 12 MB, while adding gzip also reduces it to 6 MB.
Edited by: 966944 on Oct 22, 2012 8:19 AM

Whatever the truth of all this may be, you won't find it here. This is a user to user forum, not Oracle support or a channel to the developers. All you will get here at best is valid post hoc reasoning: at worst, guesswork. And if you're trying to bring this issue to Oracle's attention, again this isn't the place to do it. Locking the thread.

Why are my desktop files not showing on the desktop

Why are the files in my desktop folder not showing on my desktop?

An add-on can put its icon on the bar automatically if it likes, but some add-ons do one of the following:
* Add an item to the Tools menu
* Add an item to the right-click menu (depending on the context)
* Put a button in the button palette so you can add it to a toolbar if you like (''to call up the button palette, use'' View > Toolbars > Customize ''or right-click a blank area after the address box on the Navigation Toolbar and choose Customize from the pop-up menu'')
Also, you might want to double-check that the add-on is enabled.
Tools > Add-ons > Extensions
If you have the orange Firefox button, it's Firefox > Add-ons > Extensions
Does that help? (If you have problems with a particular extension, you could mention which one it is for more specific comments.)

Why are my desktop fonts not showing up as an option to use in Muse anymore?

Why are my desktop fonts are not showing up as an option to use in Muse anymore? I know that my desktop fonts are not web safe and will export as an image... But I would still like to have them as an option. Why did this start with the latest release? I cannot find anything in the preferences or menus to make them show up as an option. I am running OSX 10.9.4 and Muse 2014.0.1.30 CL785017. Please help!!!

Hello,
Could you please try the following:-
Reboot in safe mode by pressing the SHIFT key (it takes a while) so the OS clears the font cache.
Reboot then in normal mode and the fonts should show properly.
Regards,
Neha

Why are my mjpg files not streaming anymore going from version 36 to 37?

The video streams from my axis cameras on version 36 but on version 37 it gives a still image. When i refresh the page it returns the image as it was when i refreshed it but it does not stream anymore. I have updated all the plugins and if i downgrade to version 36 it works again.

Start your '''Computer''' in safe mode with networking. Then start Firefox.
Try '''Safe''' web sites. Is the problem still there?
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''

Why are certain sound files not playing correctly in iTunes?

I have had iTunes for years and have never had prolonged or unsolvable problems with anything playback related until now. I recently acquired some music, and it plays perfectly when I use WMP. When I added it my iTunes library, however, the audio is compressed during playback and there is a lot of skipping and blips going on in every song. It still plays perfectly in WMP, but not matter what I do the same thing happens in iTunes.
For reference, here is what the original audio songs like
http://picosong.com/cNPn
And here is what it sounds like in iTunes
http://picosong.com/cNPe

I have a similar problem. When I try to play TV episodes that were downloaded (in .m4v format) using iTunes, QuickTime (7.0.4) will play video without audio, and when I press "stop", QuickTime locks up!
My system used to play these files PERFECTLY, until I downloaded some shareware video format conversion programs (that didn't work, anyway). I believe one of them installed a shared DLL or CODEC or something that is conflicting with QuickTime. I'VE UNINSTALLED AND REINSTALLED QUICKTIME AND ITUNES COUNTLESS TIMES, trying to follow different people's advice, mostly from posts on this site, but nothing helps!!
The thing we have in common is that it sounds like you also have other video software that could have conflicting CODECs or shared DLLs. DOES ANYBODY KNOW HOW TO TRACK THIS PROBLEM DOWN??
And why doesn't Apple make a CLEAN uninstaller and a COMPLETE installer? People shouldn't have to do the manual registry editing and file deletions that other people are recommending!!!!!
Intel 915 Mo Bd. 3.2GHz 1G RAM Windows XP

Why are my log files not getting backed up?

I just tried to get some files from ~/Library/Logs but found that the entire Logs directory was not on Time Machine - looks like every thing else in ~/Library was there. I checked the exclusion list and it was not on there.
I know that some ~/Library stuff gets backed up because I was recently able to find and restore some iCal events from about 4 months ago.
Anybody know what gives? Is there any way to change this?
Thx

frankinmelrose wrote:
I checked and both /Library/Logs and ~/Library/Logs are on the exclusion list - now why doesn't Apple's help file discuss that?
Now, that's funny! Apple's Help, while improved over the last few releases, is nowhere near complete. That's why some occasional tips turned into my 120+ page website, mostly about Time Machine, and several others have written entire books about OSX.
By all means, tell them about it at: http://www.apple.com/feedback/timemachine.html
Maybe if enough of us do that, they'll reconsider.
My problem - as a software tester, I occasionally would like to ensure that logs for a particular app stay around during my test period - in this case, the app under test did an archive, but kept only the previous 5 logs as backups (and without a setting I had access to) - and, of course, I was looking for an earlier log.
So, is there any way to tell Time Machine at the start of my testing period to save logs in specific ~/Librarary/Log subdirectory and then at the end of my testing period, tell TIme Machine to stop backing them up?
Not directly, other than periodically copying them somewhere else. But the schedule and handling of the "rotation" of some can be altered, if you're comfortable with UNIX and Terminal. See the MAN pages for newsyslog and newsyslog.conf.

Why are my Indesign files not showing up in Bridge

I downloaded CC 2014 at the same time as transferring my files to a new computer. Now on Bridge, the only files showing up are jpgs and pdfs. Any idea how to integrate the indesign and photoshop into Bridge?

Firstly, you're using <audio> which is a HTML5 tag, but your doctype shows XHTML1. Change this:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
to this:
<!DOCTYPE html>
Browsers go to quirks mode when they see a major doctype conflict such as this one.
Secondly, HTML5 Audio is not fully supported/ native in some browsers - especially older ones. You can consider using a 3rd party HTML5 player such as http://mediaelementjs.com/ because they usually have a fallback mechanism to ensure your file works on older browsers.
Another observation: There is no space between 2 attributes in your code.
<source src="music/Commercial Demo.wav"type="audio/wav"/>
Should ideally be like this:
<source src="music/Commercial Demo.wav" type="audio/wav"/>
Note the space between src and type.

Why are my exported movies not complete?

When I try to export a movie from FCP HD (and now 5) as a Windows Media file, it only creates a new movie out of the first 20 seconds of the movie. The original is only 38 seconds long. The same thing happens as an AVI or trying to do this from Quicktime Pro.
I can only export the whole thing as a Quicktime but can't get it small enough to email it.
Compressor did the same thing.
Help!
G4 dual 1GHz Mac OS X (10.4.8) Final Cut Pro Studio

You might have some sort of a trial version of Flip4Mac on your computer... I seem to remember that the old demo only let you export 20 seconds...
But my memory is fading in later years.
What are you using to export to wmf - Quicktime alone won't do it...
CaptM

Why are all transferred files not accessible?

I am linked to my iMac yet whenever I transfer files over I cannot open or change them without having to put in my administrator code. Why is that? I have put in my administrator name on this computer with the ability to read and write. I don't see why that is not recognized. Anyone else having this issue?
Thanks,
Richard

Whatever the truth of all this may be, you won't find it here. This is a user to user forum, not Oracle support or a channel to the developers. All you will get here at best is valid post hoc reasoning: at worst, guesswork. And if you're trying to bring this issue to Oracle's attention, again this isn't the place to do it. Locking the thread.

Why are my tv shows not going on my ipod?

when i try to sync my ipod to my computer with my itunes , my itunes won't register that my tv shows are all checked so i can't get them onto ipod. Why won't my itunes recognize my tv shows?

Double check to see how TV Shows are configured to sync to your iPod. Plug your iPod in and when it appears under Devices in the left hand pane of iTunes, click on it. This will bring you to the iPod's Summary tab. Now locate the TV Show tab along the top and click on it. What configurations do you have selected/enabled from under this configuration tab?
B-rock

Why are my cropped images not printing at the size I have cropped them to?!

Hey!
I know how to crop images to specific sizes using either the rectangular marquee or crop tool. However, I am needing to print a number of small images, so want to compile them into one document to save paper. Once the image is cropped, it shows up in 'image size' as being the required size, however, when I copy and paste it into another document in an attempt to arrange it on a page with other cropped images, the images come out at about half the specified size when I print them.
Is it to do with the view I am using, because it doesn't seem to matter whether I set it to 'print size' or 'actual pixels'?
I can't seem to find an answer to this, and I'm sure that I didn't have a problem with this when I was using photoshop more regularly a few years ago!

Hello,
You need to ake sure the target document and the source documents have the same"resolution", in other words the same PPI.
You could also use the Edit>Place command, which will respect the print dimensions of the source photo, but import it as a Smart Object.
CB

Why are my exported files not going to me email? I have used 3 different ones.

Similar Messages

Maybe you are looking for