Why are my files not opening in PS, when I select "edit in ps" ?

The external editor is Photoshop CC 2014 (PSD, Profoto, 16bit, 300ppi). When I select edit in ps, ps opens but the file does not. I suspect that I changed a preference somehow in the process of setting up the radial menu for my wacom tablet, or when I deleted Photoshop CC, when I realized that I had both PS CC, and PS CC 2014 on my system. Would appreciate guidance to make necessary corrections, so files open in PS.

See Rikk's response above.
Solution 2: Run a repair mode installation of Photoshop CC 2014 from the Creative Cloud desktop application.

Similar Messages

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

HT203088 Why are CR2 files not supported? How do I get them to open??

I don't know if this should go in Aperture or not. I have some photos that I took with a Canon 5D Mark III that are .CR2 and I CAN NOT get them to open in Camera Raw. I have updated all of my software with the exception of the adobe products. How do I get the .CR2 files to open???

Kbrian
According to Apple the Canon 5D Mark III is supported in Aperture 3 or later
http://www.apple.com/aperture/specs/raw.html
I am not a Canon user - but perhaps this model also allows you to save a small RAW file - perhaps called sRAW?
This may not be supported by Apple
Be aware, that although the file has a CR2 file suffix, every RAW file is unique to the model that generates it and has to be individually supported by Apple via a system level update
Hope this helps
Brian

HT1349 Why are my games not opening? I already reset my iPad but still not opening. What's the best thing to do?

My games are not opening. I tried resetting my iPad but still not opening. once pressed, it doesn't do a thing.

1. What's the best way to speed up the slide show to about 2-3 seconds an image instead of the 5 seconds the template is forcing me to use?
You can only set the duration of a slide to less than 5 seconds, if you are using a theme, were the transitions between slides can be disabled or controlled - so you would be restricted to the "Classic" theme or the "Ken Burns" theme. All other themes need at least two seconds for the transitions and three seconds to actually show the photo.
You can set the Ken Burns Theme to a very short time for the transitions and to add the "Antique" photo effect to selected slides, like this:

Why are my programs not opening when I click on them?

I click on a program and it will not open. The icon bounces but I can't open. When I right click on it it gives me the option to force quit. I tried going into settings but same thing - bouncy bouncy

you need to open a force quit window by clicking on the black apple in the top left corner of the screen and quit out of all applications
then shutdown your mac and do SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
after doing this reset restart your mac and try to open your apps and the issue should be resolved.

Why are shared files not visible when iPhone4S connected to iTunes?

What makes this problem mysterious is that I have exactly the same settings on the same or eqivalent Apps on iPad2 and iTunes4S but when my iPhone is connected to my iTunes (running on my PC under Win7) it shows no files on Apps like Pages, iBooks, Keynote, and Print-n-share. Each of these Apps has files and each shows files when I connect my iPad2. I cannot export or import filesto/from itunes and iphone because the list of files inside the Apps is not visible in itunes.
PS I CAN, btw, export and import files by using the amazing App and service "DropBox" which is the only route in and out of my iPhone (I am not ready to use iCloud).

This is not a reply but an addition. While searching for answers as to why "Shared" files in original Apps in my iPhone4S did not appear on itunes I came across a similar discussion on another Forum in which Jim described in some detail how to get the two devices (my iPhone 4S and my iPad2) to recognize similar embedded files in similar Apps. https://discussions.apple.com/message/16690584#16690584
I went through this promising procedure but it did not help. Since the two devices are independent (I think -- they are on the same accoubt but ar different devices) I should be able to make them work the same way with regard to what is seem in iTune.

Why do pdf files not open in firefox and display on screen?

I am unable to view pdf files in firefox and have to default to Explorer. Why is this happening?

I have had this problem in Firefox version 3. I updated to Firefox 4 and again I received a message that Adobe Acrobat could not be opened witthis browser.
Howver, I went to "Opening PDF files in Firefox" in Firefox support.
I followed the instructions under "Check Firefox settings". Iset the Action for Adobe
Acrobat Document to "Use Adobe Reader 9.4 (default)" and IT WORKED.

Why will .indd file not open in id CC?

I have chapter .indd files from a production group. The Links folders are in the same file folder. I get file type not supported, missing plugin, or file open in other app when I try to load the id chapter files. Any suggestions?

Are you sure about all the file types?
And you are using the current version of InDesign CC, version 9.1.0?
There is a script by Jongware you could use to identify the version of an InDesign file:
IDentify.jsx
http://forums.adobe.com/message/4071273#4071273
You can run it from InDesign and check the file from the production group…
Maybe it was gone corrupt in transfer to you?
Did you recieve a zip archive with all the files and folders?
(That would minimize the possibility of corruption)
Uwe

Why are my files not available when checked out?

I have a relatively new Win 7 box, running TCS 4. So in Frame 11, I have checked out a book (using CMS/SharePoint) and everything checks out ok. But when I go to edit the files, they all have question marks and if I try to open them, the message is "cover.fm does not exist." for example.
Also, a long file directory is showing instead of just the file name.
Other users with similar setups are not having this problem.
I can work with other books just fine, but not this one (which is the MAIN one I use FM for!).
Help!

FM uses the relative path from the book location for the filename displays in the book. If the book and files are all in the same location, then the FM will just display the filename. I'm not certain how it's handling things if you're checking things out of a repository, but it should have everything in the same folder, so relative naming should be expected.

Why are .xlsm file not listed under spreadsheet in finder?

In finder (os10.8.2) the .xlsm files are listed under documents not spreadsheets. Is there a way to get all spreadsheet listed properly?
Len

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Why are my files not showing up on desktop?

I was running several programs on my macbook air: iChat, iCal, Mail, Word for Mac, Safari, and Finder. In Safari, I would right click on any file (word, powerpoint, pdf, etc) to download it to desktop as I normally would. All goes well until I actually go to desktop and see nothing. The file does not show in my desktop. I go into finder, pull up the desktop folder and the file is there. Here's the catch: files downloaded to desktop from other sessions show up in both locations (actual desktop and desktop folder in finder) but the new ones do not. Forcing all my programs to quit doesn't help, only restarting the system does and then the files show up in my actual desktop as opposed to only the desktop folder. I feel like this is rare and only happens when I have iChat open in addition to other programs (although I'll be doing more tests to confirm). I'm running the latest OS (Lion) on a Macbook Air. Anyone else seeing this issue or know what's going on?

Hello, MMars12.
Check to see if this feature is enabled by going to Settings > Notification Center and under Access On Lock Screen make sure Notifications View is On.
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
Cheers,
Jason H.

Why are raw files not converting to DNG?

I currently have Photoshop CS3 with ACR 4.6. I just purchased the Nikon D300s which doesnt work with this version of ACR, so I downloaded Convert to DNG 4.6 and unzipped it. The box came up to convert and I hopefully entered all the correct info, then I received the Conversion Status box which shows all the files I chose, but it says none of them were converted with the following message: "There was anerror parsing the file".
What does this mean and how can I fix it. Thanks, Karen

karenskelly wrote:
Thanks Jim. Are you talking about 5.5? As far as I can tell, anything starting with the number 5 only works in CS4. Which download would you suggest trying?
Thanks, Karen
Camera Raw 5.5 is only compatible with Photoshop CS4. But the DNG converter 5.5 is a stand-alone program. It runs by itself, it does not need any version of Photoshop to run. DNG converter 5.5 will convert images from the most cameras, and will create DNG files that are compatible with ALL versions of Camera Raw since version 2.4. So, yes, I am talking about DNG converter 5.5. Download and install it and look at the options. Choose appropriately, and then do your conversion.
As far as the version number is concerned, you need to concern yourself with it only because the version number will enable you to know which cameras are supported. The DNG converter is released right along with Camera Raw, so the supported list is always in sync. But it doesn't mean that DNG converter is only compatible with that same version. I hope this clears it up for you.

Why are my files not enabled when I try to file place?

I'm running Mac OSX Lion 10.7.3. When I try to "place" a file in a document, the files are greyed out in Finder's window. Each time, I have to choose "Enable all readable documents" in bottom of my finder window to make them available.
PS 5, by default, showed them as enabled. Can anyone HELP?

Have you tried resetting your preferences? That usually clears up issues like this. FAQ: How do I reset my preferences?

Why are my apps not opening

They will begin to open and then just close. This is for all of my game apps?!

Here is what you should do.
1. Restart Your iPad. Turn it off, then turn it back on.
2. Close all apps. Open multitasking (double click home button), hold an app till it wiggles, then tap the button above each of them.
3. Sync apps and songs to iTunes then Restore to Factory Settings.
If that didn't help, I don't know what else would.

Why does the image not open in Elements when I opt for Edit in Photoshop Elements 11 from the Photos tab in Aperture?

With an image in Aperture, when I got Photos one of the options offered is "Edit in Elements Photoshop 11", but although selecting this opens Elements, there is no image and it is necessary to open the image in the normal way from within Elements. Other plugins, e.g. from Topaz work superbly from within Aperture. I am puzzled to know the reason, and in particular if there is any setting in either Aperture of Elements that need to be attended to. I would be very grateful for any suggestions.
Barry Willcock

Hi Frank, and many thanks. I can now get the picture into Elements, and work on it. However, when I have finished, I save it (giving it another name that I can recognise if the amendments are slight) it puts the file back into the same folder, but I have then to import it into the Aperture library in order to see it back in Aperture. Not a big problem, but an interesting one.
Again, many thanks
Barry

Why are my files not opening in PS, when I select "edit in ps" ?

Similar Messages

Maybe you are looking for