Why are my images noisy when editing in PSE10 from LR4?

My workflow is as follows:
raw file, retouched in LR4
chose "edit in PSE10"
PSD file, 8 bit, srgb, 300 res
Thank you!

If you are exporting as sRGB then you are viewing in two different workspaces as Lightroom uses ProPhoto RGB. Try exporting to Elements as ProPhoto RGB and make sure your settings in Elements is set to Optimize for computer screens (Edit >> Color Settings).
It will also help if you zoom in to at least 25% when viewing in the Elements Editor.

Similar Messages

Why are my images blurry when I save my doc as a pdf?

I have Microsoft Word 2007. I am trying to save a document with a lot of images to a pdf but after I save it as a pdf...all my images are blurry? I have tried saving the images as a TIF (using Snagit) instead of a JPEG because I thought the problem was with the image. But perhaps it is with my Adobe Reader. I had a friend try fixing the pdf file from her computer and her images come out great while mine are still blurry.

Hello there,
Thanks for posting. Did you convert the file to PDF using Acrobat.com (www.acrobat.com)? If not, you may want to give it a try. That being said, it sounds as though it could also be a settings issue in Adobe Reader; unfortunately, if that's the case, I won't be able to offer much assistance. Perhaps this thread in the Adobe Acrobat forum will be of help:
http://forums.adobe.com/thread/305911
It may not be of specific help, but it may put you on the right path. Please let me know if you need additional help or information and I will do my best to elaborate.
Best regards,
Rebecca

Why are round brackets escaped when copy/pasting URLs from Firefox, in contravention of RFC3987?

Go to any site, and add a 'hash fragment' to the end of the URL that contains round brackets. Copy that URL out of Firefox and paste into a text editor, like so:
https://developer.mozilla.org/en-US/#%28testing%29
Note that the round brackets have been escaped into %28 and %29 characters.
RFC3987 specifies that "(" and ")" are 'gen-delimiters' are are _not_ equivalent to their escape codes. Replacing these characters with their escape codes is as incorrect (according to the spec) as replacing the "$" or "!" characters (which are not escaped in FF or other browsers) and the "'" (apostrophe) character, which universally is. No, I don't understand it either.
Worse, this behavior does not match what the other major browsers do, so Firefox has essentially broken the promise that URLs are universal. If there are any reasons for doing this, they have not been made clear or documented, that I can find.
The hash fragment is increasingly being used to store 'client side' information, and so messing with these characters is breaking applications. I'm trying to understand if there's a good reason why, or just poor programming. In which case, I'll log a bug report.

Webbrowsers do not use RFC3987 at all. See section 1.2.a about Applicability. Maybe you should have a look at RFC3986 instead.
What is the delimiting role for the round brackets that would allow their unescaped use?

Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

"Catalog"? Are you referencing Ps Elements perhaps?
Wrong forum. We do not do Elements here.
Here's the link to the Elements forum:
Photoshop Elements

Iphone 4s with upgrade to ios 6, why are the images I save "save photo" not in my camera roll?

I have an iphone 4s upgraded with ios 6. Why are the images I save "save photo" not in my camera roll? Where do they go?
Thx,
surfin steve

Hey, I just had this problem, I went into Settings -> Privacy-> Facebook (which is where I was saving photos from) -> turned it on, then back to settings -> Facebook-> and logged in. When I went back to Facebook and saved a photo and it saved to my camera roll. I haven't tried it with anything else yet though. Hope this helps!

Why are the options for "When Firefox starts" NOT clickable in Firefox 5? I want to choose "Windows and tabs that where opened last time you accessed the net" but Firefox won't let me.

In the previous version of Firefox one could choose to save tabs so that when Firefox opened, all the tabs from the previous sessions appeared. This was done in Settings > Options > General > Startup. In the menu for the "When Firefox Starts" one had the option for "Windows and tabs that where opened last time you accessed the net." in Firefox 5.0, this menu is gray and not clickable. Help, please?

''Why are the options for "When Firefox starts" NOT clickable in Firefox 5?"
Possibly you are not saving your "browsing history" which is what the session history is tied into.
'''Not saving History''' -- check your settings for '''Tools > options > Privacy'''', make sure you are not clearing more than just cache in "Settings for Clearing History"
* http://img232.imageshack.us/img232/4928/clearcachew.png
* clearing your history at end of session, cache is the only one you would want to clear at end of session, if you don't want to lose things
There are several things that are related to private browsing and not saving History
* Private Browsing Ctrl+Shift+P
* You selected "Never remember history" in first drop-down of Tools > Options Privacy and all of the check marks disappear (See picture above)
* "Permanent private browsing mode" was check-marked under "Use custom settings for history" in the first drop-down of Tools > options > Privacy (see picture above)

Why are my notifications silent when I use my 4s on Toyota Fortuner bluetooth system, Why are my notifications silent when I use my 4s on Toyota Fortuner bluetooth system

Why are my notifications silent when I connect my 4s to my Toyota Fortuner Bluetooth system ?

Hi,
The 'features' you refer to are not anything that a customer should really care about, so why don't you just turn them off.
Do you really care about "Location-based iAds" - I've hardly ever even seen iAds!
Do you really care about the time-zone updating based upon your international location - unless you are a very frequent traveller, this 'feature' is pretty useless and can be turned off without losing functionality that matters.
The specific features to turn off are indicated in my post above - they are all in one place, they can all be turned off in about 20 seconds, and your problem will go away, and you will not lose any important functionality.
Obviously I would agree with your point if you had to refrain from using the phone or making text messages, or playing games, or taking photos... all of which are genuinely useful features of a phone.
But I disagree with you that you should deny yourself reasonable battery life on the basis that you need the specific features that made you buy this "Apple product and not an Android one" when these features are in fact not first-line, or even-second line features... they are just 'things' that make very little difference to how a person would use their iPhone at all.
Anyway, that's my thoughts on it. Yes of course it would be great if Apple could fix the bug but as it isn't showstopping, I find it hard to get worked up about it

Why are two pages yoked when I prepare a newsletter in Pages? How can I delete one without the other?

Why are two pages yoked when I prepare a newletter? How do I delete one without the other?

They are all part of one Section. Just as you do not (hopefully) rip pages out at random from books, the pages of a Section are linked by the text that flows from one to the other.
If you want to move or delete particular page/s Insert a Section Break at the end of the page before.
Peter

HT3702 why are you charging me when i have not order any apps

Why are you charging me when i have not order any apps

Well I don't know. I just really, really, really wanted to test a legit versin of Angry Birds. Thought you wouldn't mind.
But since you insist--
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Why are my images scrolling from outside the Page width?

Why are my images scrolling from outside the Page width? I am positive i has all the settings correct, to have an image parallax scroll from the edge of the page into the page and out again. But the images are flying in from the browser width - not the page width. This is not the effect I am after.
Any suggestions on how to fix this? Given the key position is only linked to the height, I can't for the life of me work out how to ensure the images start moving from a certain position onthe left and right of the page.
Thanks

I think the effect you are seeing is a result of how the lineHeight is set up. By default, the lineHeight will be calculated as 120% of the size of the largest thing on the line -- in your case, this is the inline graphic. This is designed to leave space between the line before and the line with the graphic. So it is taking the height of the graphic, multiplying by 120%, and making this the distance between the previous line and the line with the graphic. So the bigger the graphic, the bigger the space above the graphic. Normally this works well with text, but in this case you may want to get closer to "set solid". You can do this by setting the lineHeight to 100%. Or you may wish to leave a couple of percent for the descenders of the previous line. Or, another alternative that may work well for you if you really know exactly where you want the line set, you could measure the graphic, add on the number of extra pixels to leave for the descenders, and make the lineHeight a constant. So you could do something like this:
<img lineHeight="104%" height="411"/>
or this:
<img lineHeight="423" height="411"/>
Obviously you would still need to specify the source and any other parameters you want on the image.
Note that if you are trying to fit a 200 pixel high graphic into a 200 pixel high container, you will hit the same problem -- in order to fit the graphic, the container will have to be slightly bigger than the graphic in order to fit the descenders on the last line. This is true even if the last line contains only the graphic, and no descenders (or text) at all.
Hope this helps,
- robin

Why are my tags deleted when I replace pages?

Why are my tags deleted when I replace pages?

Hi Stephanie,
My suggested workaround: In Acrobat Pro, in the Page Thumbnails pane, select the pages that you want to replace then right click and select "Delete pages". Then, right-click the page just ahead of where the replacement pages will go, select "Insert pages", and follow the prompts. This is just the way I do it, not the only way.
Tiger26 is making the excellent suggestion that, prior to inserting pages, encapsulate the tags for the pages to be inserted using a Section tag. This makes the post-insertion chore of dragging the tags to their proper place in the tag structure easier.
a 'C' student

Why are my styles disappearing when I cut and paste?

Why are my styles disappearing when I cut and paste?

Go to Preferences, and then into ClipboardHandling. Click a radio button choice for All Information instead of Text Only.

Why are my emails aborted when I'm trying to send pictures?

Why are my emails aborted when im trying to send pictures?

What is the size of the email attachments you are trying to send? Many email providers limit the message content size some where in the 2-3 MB range, some larger some smaller. If your photos are multile MBs that could cause the provider to reject the email.
Try resaving a rejected photo to a smaller size/resolution and see if it goes successfully.

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to cr

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

See my response to your other post.

How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_1.png and I would like to put in something more relevant than just shapeimage?

How do I change the image title when it is uploaded from iphoto to iweb. At the moment the image title is /shapeimage_2.png and I would like to put in something more relevant than just shapeimage_2?

When you drag images from iPhoto to iWeb, iWeb retains the original filename.
When you use a mask, iWeb creates a png file with the shapeimage name.
So do not use a mask and crop your images before dropping them on the iWeb canvas.
When you use an irregularly shaped mask, then png files are created. They have to be png because of the transparency of the shape.
You can use a 3rd party application to create the png images yourself, and give them a proper name.
Or use the published png files, rename them and drop them back onto the iWeb canvas, while first removing the previous images.

Why are my images noisy when editing in PSE10 from LR4?

Similar Messages

Maybe you are looking for