Why are my images so small in Acrobat?

I am using Acrobat Professional 7 and am trying to make a PDF of some ten .jpg images including their file names. Some images appear correct while other images appear to be real small on the page while they are the right size on the thumbnail while others yet are both very small on the page and on the thumbnail. I first thought it had to do with the original resolution of the images but found later that even if all images are 96 dpi some ore fine and others are small. I tried to change settings but no joy. If anyone has a suggestion I would be grateful.
willem_b

Yes that is how i created the PDF from multiple files. But I probably was not clear. The images are all about the same size, about 1400x1000 pixels at 96 dpi. And so my problem is that they do not appear as the same size in the PDF, some are file, others are very small.

Similar Messages

  • Why are my images way smaller when exporting out of Aperture?

    I import my photos, work on them...it's going well...but, once I export them out to put them on a external harddrive, the photos are going from approx. 3 mb at 300dpi...to about 700kb-1mb at 300 dpi.
    I'm exporting them as jpeg at full size.
    I didn't crop them...I can't figure it out.
    Anyone has that issue?
    Thanks!
    IMAC G5   Mac OS X (10.4.6)  

    In Aperture on the menu bar go to Aperture >> Presets >> Image Export >> and check/adjust the image quality for your different presets or create new ones.
    Hope that helps.

  • Why are the fonts so small since I upgraded? I have difficulty reading folder names even when I wear my reading glasses.

    Why are the fonts so small since I upgraded? I have difficulty reading folder names even when I wear my reading glasses.

    Kirby:
    . What version of OS X?
    10.6.8 - latest Snow Leopard.
    . How are you determining the size of the Vault?
    Using Finder: "Size 5.8 MB on disk".
    . What exactly did you do that you describe as "I decided to set up a Vault to back up to the Time Machine external hard drive.".  In general, Time Machine should be on a drive dedicated to it (that is, with nothing else on it).
    Oops, right: I meant Time Capsule. Time Machine is backing up to the Time Capsule, but I thought I could also use the Time Capsule as an external hard drive as well as a target for Time Machine. So, this is a non-no?
    . How many images show up when you select "Photos" from near the top of the Library tab of the Inspector and filter using the Filter Rule "File Status" with the argument "Referenced"?
    1. Thanks for getting me to learn Aperture's "filtering" (Command-F). Cool.
    2. No images. Aha. So, do this mean all the masters are in the iPhoto library?
    But, using Finder:
    iPhoto Library: 18.2 GB 8,014 items
    Aperture Library.aplibrary: 20.6 GB 7,945 which would be right: I did some deleting after importing from iPhoto
    Aperture Vault: 5.8 MB

  • Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    Why are my images suddenly darker in camera raw and photoshop C4 than when I open them in bridge?

    "Catalog"?  Are you referencing Ps Elements perhaps?
    Wrong forum.  We do not do Elements here.
    Here's the link to the Elements forum:
    Photoshop Elements

  • Iphone 4s with upgrade to ios 6, why are the images I save "save photo" not in my camera roll?

    I have an iphone 4s upgraded with ios 6. Why are the images I save "save photo" not in my camera roll? Where do they go?
    Thx,
    surfin steve

    Hey, I just had this problem, I went into Settings -> Privacy-> Facebook (which is where I was saving photos from) -> turned it on, then back to settings -> Facebook-> and logged in. When I went back to Facebook and saved a photo and it saved to my camera roll. I haven't tried it with anything else yet though. Hope this helps!

  • Why are my images scrolling from outside the Page width?

    Why are my images scrolling from outside the Page width? I am positive i has all the settings correct, to have an image parallax scroll from the edge of the page into the page and out again. But the images are flying in from the browser width - not the page width. This is not the effect I am after.
    Any suggestions on how to fix this? Given the key position is only linked to the height, I can't for the life of me work out how to ensure the images start moving from a certain position onthe left and right of the page.
    Thanks

    I think the effect you are seeing is a result of how the lineHeight is set up. By default, the lineHeight will be calculated as 120% of the size of the largest thing on the line -- in your case, this is the inline graphic. This is designed to leave space between the line before and the line with the graphic. So it is taking the height of the graphic, multiplying by 120%, and making this the distance between the previous line and the line with the graphic. So the bigger the graphic, the bigger the space above the graphic. Normally this works well with text, but in this case you may want to get closer to "set solid". You can do this by setting the lineHeight to 100%. Or you may wish to leave a couple of percent for the descenders of the previous line. Or, another alternative that may work well for you if you really know exactly where you want the line set, you could measure the graphic, add on the number of extra pixels to leave for the descenders, and make the lineHeight a constant. So you could do something like this:
    <img lineHeight="104%" height="411"/>
    or this:
    <img lineHeight="423" height="411"/>
    Obviously you would still need to specify the source and any other parameters you want on the image.
    Note that if you are trying to fit a 200 pixel high graphic into a 200 pixel high container, you will hit the same problem -- in order to fit the graphic, the container will have to be slightly bigger than the graphic in order to fit the descenders on the last line. This is true even if the last line contains only the graphic, and no descenders (or text) at all.
    Hope this helps,
    - robin

  • Why are some images being exported to Assets folder?

    On my desktop I have the structure of an Assets folder and within that a Images folder.  When I export to HTML it puts a few of the images in the Assets folder.  They are ones that are hyperlinked from a smaller image so that when they click on the smaller image the larger jpg opens in a new window.  I have security on the Assets folder on the server so I don't want these to go in there.  I am having to manually move them into the Images folder and then update the links in the HTML files.  Is there a way to make them go into the Images folder like all the rest of the images are automatically doing when I export?  By the way I don't want them to be a Lightbox slideshow.  They are large images so I want them in a window so the person viewing them can move around in the browser to view the image if they have a smaller monitor.

    Using Acrobat DC and the acrobat arrow tool. By right clicking on an image a submenu pops up. One of the items in that list is "Edit Image".  Ordinarily or historically this would then open the image in Photoshop as a temp file. Edits could be made and saved and the image would be auto updated back into the PDF.  In DC when selecting edit image, the document goes into a edit mode and the entire file gets converted into RGB color.  From here one could again right click on the same image and get the option to edit using another program, (like photoshop).  When returning back to document mode, the RGB conversion remains.
    I determine the files are converted to RGB by using the inspector tool in Acrobat as well as looking at the colorspace in Photoshop
    I determined the files were CMYK by building them that way and again verifying using Pitstop inspector.
    Following screen grabs show image before / and after selecting "Edit Image"

  • Why are my images only showing as links on websites?

    Why are almost all of my images showing up as a link to the image. I put a code in right for embedded images but when i refresh or re-visit the page with the embedded image it is no longer embedded. It shows up as a link to the image which is quite annoying. I have followed everything here http://support.mozilla.com/en-US/kb/Images+or+animations+do+not+show but none of it applies to me. I have reinstalled and checked everything in that website page.
    == This happened ==
    Every time Firefox opened
    == Unknown, but I did not make changes to firefox.

    The code for all of the images in that thread is this:
    <code>[url=http://img442.imageshack.us/i/packageplans.png/][url]http://img442.imageshack.us/img442/4330/packageplans.png[/url][/url]</code>
    <br/> <br/>''(Edited by Moderator: placed link in a CODE block - c)''<br/> <br/>

  • Why Are Lightroom File Sizes Smaller Than Elements Equivalents?

    I have been struggling to get good quality thumbnail sized images at small enough file sizes for a website. The only problem is that the versions I have done through Lightroom via the Web Module using the Flash template, will only allow a maximum width size of 191 pixels, whereas I'm looking to achieve 250 pixels wide. Doing it through Elements image resize box gets me the size I want, but for a decent quality, the file size is much larger. 
    Out of curiosity and for comparison, I made the Elements versions the same dimensions as the Lightroom ones. In order for the file sizes of the Elements ones to come even close and yet not as small as the Lightroom versions, I had to reduce the Jpeg quality to zero. This rendered them unusable.
    I can't understand why two related applications doing exactly the same thing can differ so wildly. Can someone tell me what is going on?

    Hmmm??
    Not To Sure??
    But I will try to find out..
    Keep you posted about that.
    Phillip

  • Why are my images grey in the .pdf?

    Hi,
    I began working on a 72 page project that was already begun by my co-workers who are not familiar with CS5. In InDesign, there are a total of 618 links. Hundreds of them were missing, so I spent some time re-linking the images. There are 45 images still missing, but they are on my co-workers laptop. So that is an easy fix.
    The real problem is when I convert the InDesign CS5 file into a .pdf all of the images appear as grey boxes. Even the images that have been re-linked! How can I fix this? Any advice is most appreciated!

    What sort of images are these? It might be a good idea to try both of the suggestions at the top of the forum page:
    Remove minor corruption by exporting
    Replace Your Preferences

  • Why are the words so small and I can't maximise the window?

    Ever since  downloaded Adobe Creative Cloud, the words in the Adobe window are always very very small. I can't maximize the window or zoom in. It's ver diffcult to read the small letters.

    Hi Tai,
    Kindly adjust the resolution of your screen to check if that helps.
    Thanks,
    Atul Saini

  • Why aren't images I captured using acrobat on a mac visible in a word document on a PC?

    Hi guys
    this question has been asked before, but I can't find any answers that address the exact problem I'm having.
    I use a mac to create word documents that are read by other collaborators who use PCs.  Until recently, I had created these documents on my Macbook Air, running OS X (snow leopard).  These documents involve copying lots of images, for which I was using Adobe Reader 9, into word documents (I have word 2008).  Using that setup, there was no problem.
    Over the weekend I got a new iMac, which is running Mac OS v 10.7.2 (lion).  I installed a full version of Adobe Acrobat Pro X.  Still have word 2008 (I save my documents as ".doc" because some of my collaborators don't run new versions of word and don't have the capability to open ".docx" files).
    I just got an email from one of my collaborators that she can't view any of the copied images in the document I just sent her (the first using the new setup).  Each image is just an empty box with the words "quicktime and a decompressor are required to view this picture."  I tried searching to see whether others have had this problem, and it appears they have - I see that this is mostly a problem (at least it was in the past) because macs convert  files into TIFFs when they copy to the clipboard, which the PCs can't read.
    Only problem is, all the threads I read about this problem recommended upgrading to word 2008 as a fix to the problem...but I have word 2008!  So why is this happening?  Or did it mean that the collaborator (not me) should upgrade to word 2008?
    I don't know what version of word my collaborators have, but it may be impractical for me to tell them to upgrade their versions.  Is there anything I can do on my end to prevent this from happening?
    I will say that I had this problem when I initially started this job, but was able to fix it.  At the time I was using preview to open pdfs and grab the images I needed.  I switched and started using Reader 9 as my default, and found that as long as I used the camera tool to select my images, the problem disappeared.  But in these new versions of acrobat (and reader, which I just downloaded), the camera button is gone, so it looks like there's only one way to select the image...unless someone knows a different one.
    thanks for any tips you guys can give me!
    Chris

    It's possible to add the camera (aka Take a Snapshot) tool to the toolbar in both Acrobat and Reader. Just right-click in the toolbar area, go to the Edit category, and select it.

  • Why are PSD images pixelated on Mobile site?

    Hi all,
    In my muse site I have several .psd images that are pixelated when rendered on a mobile version (testing on iPhone 5).
    They are psd buttons with a normal & rollover state. I have tried the knack I read somewhere of reducing both layers opacity in PS to 99% but this hasn't helped (can't remember why this would help).
    When you pinch to zoom on the mobile, the image obviously gets more pixelated. The image is 165 x134 px....Is it a case of designing the image much larger and then creating a frame in Muse at 165 x 134 and placing the large image in this smaller box? Would this appear crisp when zooming in? The image even at normal size still seems pixelated too?
    Really stuck on this one for a while so any help would be much appreciated. The 4 psd buttons appear under 'Features' on the middle of the home page.
    thanks.
    haventechnologies.businesscatalyst.com/index.html

    I don't know if this applies, but:
    Dark-tinted or dimmed images | 8sms
    You may want to ask here:
    http://androidforums.com/

  • Why are my images coming out of CS5 Photoshop granulated and pixelated after saving?

    I am new to CS5 Design Premium. I use a Canon 50D and shoot in RAW format. I upload my pictures into Bridge and do most of my editing in Camera Raw, then I open the object into Photoshop where I save the image into a folder. I save each image as a .psd file AND a .jpg file. I save an extra as a .jpg so I can upload to my website and to order from the lab I use.
    My question is: Why is it that my pictures are so granulated when I open them back up? They look completely fine on the screen but when I re-open them or upload them to my site, they look terrible. Have I messed up something with the formating/file size/ppi...? 8-bit, 16-bit? PPI...?
    I am confused here and highly discouraged from using my new program....HELP PLEASE!!

    Are you seeing this problem, when you Import those PSD's into a Premiere Pro Project, or in Photoshop?
    If the former, have you done the Scaling to match the Frame Size of Sequence in PrPro? If not, this ARTICLE will be helpful. Note: in Video, DPI/PPI is meaningless, and only pixel x pixel dimensions matter.
    If the latter, you will want to post to the Photoshop Forum.
    Good luck,
    Hunt

  • Why are still images importing larger than their size?

    Per instructions in a thread I had here last week, I created all of my DVD still images at 720 x 534 pixels for Premiere Pro CS5.5. But when they are brought into a DVCPRO50 NTSC Standard sequence, they are being heavily clipped. The original in one example is this:
    But when that same images is brought into PP, it is sized up like this:
    It's still proportionally correct, but a lot of the top and bottom of the image are gone. The encoded MPEG-2 sequence and disk I've done as a test display just like that.
    Why is PP doing this, and how can I get it to use images built to the correct size to be used 1:1 in a sequence instead of being scaled to about 115% of size? Hate to compare this way, but this was never an issue with Final Cut Pro, which I'm switching from. Stills created to the size FCP needed of 720 x 540 displayed and finished exactly as they were made in Photoshop. The only image area lost was the normal bit of overscanning DVDs display at on your TV.

    I guess I don't understand.  This is an excerpt from the CS help.  This seems to be inconsistent with what the last two posts said.
    Composition settings presets for square-pixel equivalents of standard definition formats have changed as follows:
    format
    pixel dimensions in After Effects CS4 and later
    previous pixel dimensions
    NTSC D1 square-pixel equivalent
    720x534
    720x540
    NTSC D1 Widescreen square-pixel equivalent
    872x486
    864x486
    PAL D1/DV square-pixel equivalent
    788x576
    768x576
    PAL D1/DV Widescreen square-pixel equivalent
    1050x576
    1024x576

Maybe you are looking for

  • I'm getting 100s of emails from apple support communities.  STOP please.

    I changed my profile to delete all requests or answers and they still come!!!!   I also signed out.  What else can I do?

  • My contact names will not be displayed!

    Hi I live in Iran when my contacts call me Their Number with country code is displayed, But their names will not be displayed! in cheap phones,this problem does not exist! This problem is very weird! Check out this very big problem to fix before rele

  • .jsp files opened in Adobe Reader by Firefox will not print on my HP laserjet

    I have a vendor site that provides me info in .jsp format, which Firefox on my Mac opens in Adobe Reader. When I send this file to my HP 3015 laserjet it starts spooling the file then locks up. I tried creating a .pdf file in Acrobat Pro, but still e

  • The value for The value for the useBean invalid?

    I get following error when I try to test application in iexplorer. org.apache.jasper.JasperException: /guestBookLogin.jsp(12,0) The value for the useBean class attribute com.deitel.jhtp6.jsp.beans.GuestBean is invalid. I got this code from a case stu

  • Downloaded Indesign on two pc's

    I set up account, downloaded indesign cs6 on one pc in May. I downloaded a second user now onto another pc. It downloaded CC as only option to download. Now cc document wont open on pc with cs6. I want to be able to work on document on both pc's. Sho