Why are my masks out of sync in final export?

I have been attempting to export out a final version of a project and have found that some of my masks are not lining up.
When I Re-check the composition the masks are fine and line up.
Here is an example:
EXPORT
https://www.dropbox.com/s/f9qavqspjp4b1a1/RENDER_MEv10_00644.png
COMP
https://www.dropbox.com/s/il3ktf4rpzj5iee/Screen%20Shot%202013-06-30%20at%205.08.02%20PM.p ng
I have done the following to try figure this out (nothing hs worked)
- Preserved frame rates in comp settings
- checked everything is the same frame rate (25fps)
- baked the mask (key everyframe)
Does anyone know how to solve this ?
Cheers Pie

If it works in the composition at full rez then you may have a disk cache problem. Update AE, Turn off Disk Cache, and purge everything.
Try rendering from Adobe Media Encoder.
You still haven't lifted the hood. I have almost know idea how you set up the comp, where the footage comes from, or what you are doing that could cause this very odd behavior. This looks more like a transfer or layer order problem than a frame rate problem. This could be caused by 3D layer order, an adjustment layer, or a bunch of other things. It could even have something do to with open GL rendering. Once again, very little information about a project results in very little help.

Similar Messages

  • After syncing my music onto my iphone5, why are songs grayed out and not playable

    after syncing my music onto my iphone5, why are songs grayed out and not playable?

    If you are syncing music to the iPhone automatically, you won't be able to drag and drop tracks on to the iPhone and the music will be grayed out.
    You'll have to Manually Manage the music.
    Configure iPhone, iPad, or iPod for manual management
    If you have iTunes 7 or later*, follow these instructions:
    Connect the device to your computer.
    Open iTunes.
    Select iPhone, iPad, or iPod in the Devices list.
    Click the Summary tab and select "Manually manage music and videos".
    Click Apply.
    Even when you have enabled manual management, you can still sync some content automatically. Select any content tab, such as Video, to enable automatic syncing for that type of content.

  • Why are songs greyed out in my itunes

    Why are songs greyed out on iTunes?  The songs will play within iTunes, but will not sync with my iPod Classic 160G.  How do I correct this situation?

    Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
    https://discussions.apple.com/community/itunes/itunes_match

  • Why are commands "grayed out" on edit tab on Elements 9?

    Why are commands "grayed out" (not available) on the edit tab on Elements 9?

      It’s often awaiting a user action e.g. opening a photo in the main Editor space or making a selection or a new layer or flattening an image or changing bit depth etc.

  • Why are menus grayed-out in trial version? how can I use the effects then?

    why are menus grayed-out in trial version? how can I use the effects then?

    Every piece of software has a learning curve, and its own terminology.  After Effects is a complex professional tool, used by home enthusiasts right through to feature film makers. 
    There's plenty of very user friendly video editing software that will do the tasks you've mentioned easily.  Might I suggest Adobe Premiere Elements.
    For the record, you can't apply an effect to anything in After Effects until you have selected a target layer in the timeline.  This functionality is true of any video editing or compositing software I can think of,

  • Why is audio & video out of sync in the source monitor?

    It is my second day with Premiere Pro CS5.5. I dit something and now is the source material out of sync. I re-imported the clip but it is still out of sync. All the other videos are fine. Please help!

    Not nearly enough information for anyone to try and help
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    More information needed for someone to help http://forums.adobe.com/thread/416679
    Some is general about your computer and OS, some is specific to video editing
    Build a Configuration file http://www.piriform.com/speccy
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
    Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html

  • Why is my audio out of sync after exporting?

    I am using Final Cut Pro X 10.1.
    My footage plays fine and it's all in sync with the external audio when played all the way through on the timeline.
    When I export the project the audio suddenly becomes out of sync around half way through playback.

    These are the details of my audio recording

  • Why is the sound out of sync with the video on my PC laptop?

    The sound is out of sync with the video, it skips (like the old-fashioned vinyl records) or there is no sound at all. As well, the video portion is jerky.
    I'm travelling and don't have access to a TV so have to watch it on my PC laptop.
    I've rebooted my laptop a couple of times, but the problem re-occurs.

    In what app?
    Have you restarted or reset the device?

  • Why are my photostream photos not syncing to my new device?

    Bought new iDevice (iPad4). Why are most of my photosteram photos on my iPhone not available on my new device? Only a few are (mostly recent).
    thanks for your help.

    On the iPad and iPhone tap Settings > iCloud
    Toggle Calendars off then back on then restart the devices.
    Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.

  • Video out of sync in Final Cut Express... but in sync everywhere else!

    'm working on making one video that is composed of two camera angles of the same thing. So, I have two video tracks in Final Cut Express, one for the side view, and one for the main view. Both videos are Quicktime Movies (.mov extension).
    Here are the file details:
    Main Cam: duration - 1hr 26min 46sec // file size - 5.74gb
    Side Cam: duration - 1hr 29min 18sec // file size - 5.63gb
    [the side cam video is a little longer because I started filming with that camera a little bit before the main cam and stopped the filming a little earlier]
    Now, here's the problem. Both videos are in my Final Cut Express project. The Main Cam video runs fine. But the Side Cam video's video is out of sync with the audio by a lot (somewhere between 2 and 6 full seconds). Normally I would think that something had happened during the filming, but here's the odd thing: the Side Cam video plays perfectly in sync out of Final Cut Express.
    If I open it in Quicktime, or even in iMovie, the audio and video are perfectly in sync for the entirely of the video. But when I import it into FCE and watch it there, whether it's in the timeline, in the viewer, rendered, or unrendered (I've tried them all), it's horribly out of sync.
    So, the video plays fine and in sync everwhere except for in the Final Cut Express program. The Main Cam video, which has a very similar duration and file size and which is the same file type, plays perfectly even in FCE. The only problem is the Side Cam, and I can't figure out why this is, or how to fix it.
    Another thing: these videos were not captured from a camera into Final Cut. I already have the video files on the computer, and as I've said, the audio is fine there. To get them into FCE, I use file -> import.
    Also, if anyone has suggestions on how to fix this, could you provide directions of some sort? I'm fairly new to Final Cut.
    Any advice would be greatly, greatly appreciated.
    Thank you so much in advance!

    Hi(Bonjour)!
    Does both camcorders was set to 16-48 khz audio?
    One way to synch audio that drifting from video (or from anoter audio lenght) is to set precisely 2 markers (one near the beginning, another near the end) in the correct lenght video track. Try to find spots where you can hear and see a common reference. The result of the workaround will put a corrected audios between those points only.
    Now note the duration between those 2 markers in video track.
    *Unlink the video/audio clip with the wrong duration.*
    Select the drifting audio and put the 2 markers at the intended reference points.
    The duration should be less or more than the video.
    Use the blade tool to cut the wrong lenght audio at markers.
    The tips is to set a new duration for this portion with the set speed command.
    With this +new duration+, align the in point of audio with the first video marker. The out point of audio should be aligned with the second video marker.
    Now the audio should match the video lenght and should be in synch.
    Michel Boissonneault

  • Out of sync in Final Cut Pro 6

    I shot a musical audition in SD on a Panasonic 3CCD camera. I'm using Log and Capture in FCP6 on my MacBook Pro, 2.4GHz Intel Core 2 Duo (4 GB 667 MHz DDR2 SDRAM). I wanted this audition separate from others I've filmed, so I copied my previous sequence and deleted the video from it, then I brought in the new clip. After a few seconds, the audio and video go out of sync. I checked the sequence settings and they are the same as my original sequence. I tried ajusting the capture settings in Log and Capture Window (I chose DV NTSC 48K Anamorphic, which corresponds to my sequence settings, as best as I can tell (below):
    720 x 480 NTSC DV (3:2)
    NTSC- CCIR 601/DV (720 x 480) Anamorphic 16:9
    Lower (even)
    DV/DCPRO-NTSC
    Editing timebase 29.97
    48 Khz
    16-bit audio
    The footage isn't out of sync when I watch the being captured. I've tried several times, and yes, I zoomed in at the head of the clip to make sure I hadn't somehow bumped the audio tracks out of alignment!
    Can anyone tell me what is happening here?
    Thanks,
    Andy

    Oops. That's where I thought I was. Sorry.

  • Audio And Video out of sync in Final Cut, but not in quicktime

    I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
    I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
    By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
    This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
    This is what I did to attempt to fix the problem:
    - Check drives using disc utility and repair permissions
    - Remove Final Cut Preferences using Apple guidelines
    - Switch hard drives
    - Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
    - reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
    - switch ram slots, and even replace ram with different sticks from another G4 machine
    None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
    Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
    Thanks

    For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
    Editing in FCP 6.0.2
    QT was just updated to 7.3.1 the other day (hmm)
    On an MacBookPro machine, OS 10.5.1
    Software updater says everything's up to date of course.
    DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
    In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
    I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
    Grr,
    Nicole
    Editor, RHED Pixel

  • Some audio out of sync in after Export

    Can using the built in Audio tools  like Loudness,  or adjusting the sound levels in the waveform cause the audio to go out of sync?
    I'd say not...but that is what seems to be happening.
    I have a 2hr 30 projet for a DVD.
    All individual clips captured on Canon 5d 3 at 48khz 25fps
    Project is 48khz 25fp, as set automatically when the clips were first dropped on the timeline
    One particular group of 3 clips, seems to randomly and suddenly loose sync in the middle, sometimes at the start, some times in the centre, then often it comes back at the end.
    Of the whole 2 hr 30 project only this bit is giving issues, all other clips have been edited in the same way, and are similar lengths,some longer, some shorter, all stay in sync. Max clip length about 8 minutes
    In the timeline the audio stays perfectly in sync
    I have re made the sequence of three clips , totalling 24 minutes  long, probably 6 times now. and each time after adjusting the audio levels the exported audio has variable sync,
    Also re imported the footage and tried again
    No added audio tracks, just a single compound clip containing three complete clips, with the ends trimmed 
    Audio has not bee detached from the video.
    All I am doing is adjusting the audio levels,
    Hum On
    Noise reduction to about 2%
    Loudness On :
    Amount 20%
    Uniformity 15%
    First noticed this yesterday on a DVD burnt using "Send To Compressor" Create DVD
    Also happens using the in built Share, to DVD, ot share To master File
    Output settings are also 48khz and 25fps
    If I do an export of the clip With no audio corrections, it is fine.  But as son as I try and adjust the audio levels, it goes out of sync.
    I'd half suspected I had somehow dragged the audio in the timeline, when adjusting the levels, but no.  Go back and play the clip in the timeline and it is perfect.  But Share  that compound by dropping in to a  New project, export as master and Playback in QT and the audio goes out of sync after I have done a levels correction.  Un-corrected ( for level only ) audio stays in sync.
    o master file that single co

    How are you exporting? The first quicktime export option or quicktime conversion? What are your settings for the export?
    Did you capture with device control with abort capture on dropped frames and create new clip on timecode break enabled?

  • Audio goes out of sync when I export to iDvd.

    Anybody have any idea what this could be, and how to fix it?
    Everything's fine on iMovie, the audio syncs up fine to the video, but in iDvd, the audio seems to have randomly shifted all across the video.
    It's not all the audio, some of it is still in place (but with other sound layered over it).

    Try exporting the iMovie project as a single full quality dv format quicktime file.
    I use iMovie6 HD and this is my usual procedure that works well.
    Make the movie in iMovie, will involve many separate clips. When finished, export (share) as a single full quality dv format quick time file. When I have an hours worth of smaller projects, I create a new iMovie project and import all of the quicktime .dv files for each separate short project. I add chapter markers in this project, then share with iDVD. I then burn an hours worth of stuff at best quality and distribute to family and friends.
    iDVD seems to work better with iMovie source that has fewer clips.
    BTW: Are you having problems with standard def or hi def iMovie source. Another part of my procedure is that I take the raw tapes and download the entire thing into one iMovie project. I don't edit or change the footage at all, just want to archive to DVD for posterity. In this case, I want to share the iMovie project with iDVD directly. This has worked OK for standard def projects, but my first hi def project (1080i) that I tried, the sound was out of sync. To fix this, I had to create a regular DV widescreen iMovie project, and drag all the clips into it from the HD project. It took over an hour for my humble mac mini to convert the files, but I was then able to share with iDVD and the finished DVD worked ok.
    Hope this helps.

  • Weird audio out of sync problem after export

    This is the second time I've run into this problem. My video and audio are in sync in my timeline, but upon export to QT, one of the clips (but ONLY one of the clips) is out of sync. I tried exporting two different times: same result.
    Doesn't make sense to me. All the clips were imported from the same DV tape from my Canon HV30.
    Can anyone give me some advice here?? Thanks.

    How are you exporting? The first quicktime export option or quicktime conversion? What are your settings for the export?
    Did you capture with device control with abort capture on dropped frames and create new clip on timecode break enabled?

Maybe you are looking for