Why are my :) ;) not pretty and colourful?
On my 3G when I typed in ; ) or : ) the wink or smile would show up but they do not on my Iphone 4. Is there a setting or something I need to set?
Just for the record, I've owned one 1st generation iPhone, one iPhone 3G, and two iPhone 4's over the years.
None of them came with the "emotions" preinstalled. I only used Emoji once and it was on my 3G a few years ago.
As stated before, You have to download a 3rd party application for the animated emotions.
Similar Messages
-
I have found that at least 3 music videos that I had previously purchased are not available in my I-tunes music video list. I paid for them over a year ago, why are they not accessible, and why did they just disappear from my lists?
Have you deleted anything from your iTunes library ? Have you checked to see if they are still on your computer, but not listed in your iTunes library ?
If not then do they show in the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage for redownloading ? If they don't show there and others do and they are still in your country's store, then check to see if they are hidden : http://support.apple.com/kb/HT4919
If they are no longer in your store for redownloading (or you aren't in a country where music videos can be redownloaded) then you will need to copy them back from your backup of your library/downloads. -
Why are messages not dequeuing and stuck in the ready state?
Messages are successfully enqueueing but not dequeuing and are stuck in ready state (STATE = 0). The ENQ_TIME is 5 hours ahead of system time. In one environment, AQ is working (10g 10.2.0.4.0). In the other environment, it is not working (11g 11.2.0.3.0).
I just did the following:
1. Purged queue table
2. Stopped queues
3. Dropped queues
4. Dropped queue table
5. Created queue table
6. Created queues
7. Started queues
I tested once and a record was inserted in the queue table:
MSGID <msgid>
CORRID
PRIORITY 1
STATE 0
DELAY
EXPIRATION
TIME_MANAGER_INFO
LOCAL_ORDER_NO 0
CHAIN_NO 0
CSCN 0
DSCN 0
ENQ_TIME 12/23/2014 4:33:43.338902 PM
ENQ_UID <enq_uid>
ENQ_TID <enq_tid>
DEQ_TIME
DEQ_UID
DEQ_TID
RETRY_COUNT 0
EXCEPTION_QSCHEMA
EXCEPTION_QUEUE
STEP_NO 0
RECIPIENT_KEY 0
DEQUEUE_MSGID
SENDER_NAME
SENDER_ADDRESS
SENDER_PROTOCOL
USER_DATA <user_data>
USER_PROP
Notice the RETRY_COUNT is 0. The ENQ_TIME is 5 hours ahead. In the procedures to enqueue and dequeue, there are no errors.
Following is the plsql to enqueue:
CREATE OR REPLACE PACKAGE BODY
pkg_2
AS
FUNCTION queue_create_thing ( <parameters> )
RETURN NUMBER
IS
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
v_message msg_type;
v_thing_id things.id%TYPE;
BEGIN
v_message := msg_type( <parameters> );
dbms_aq.enqueue(queue_name => '<queue name>',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => v_message,
msgid => message_handle);
RETURN v_thing_id;
EXCEPTION
WHEN OTHERS
THEN
errpkg.record_and_stop (SQLCODE);
END queue_create_thing;
PROCEDURE queue_delete_thing( <parameters> )
IS
enqueue_options dbms_aq.enqueue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
v_message msg_type;
BEGIN
v_message := msg_type( <parameters> );
dbms_aq.enqueue(queue_name => '<queue name>',
enqueue_options => enqueue_options,
message_properties => message_properties,
payload => v_message,
msgid => message_handle);
END;
END pkg_2;
Following is the code to dequeue:
CREATE OR REPLACE PACKAGE BODY
pkg_1
AS
PROCEDURE create_thing ( context IN RAW,
reginfo IN sys.aq$_reg_info,
descr IN sys.aq$_descriptor,
payload IN RAW,
payloadl IN NUMBER )
IS
dequeue_options dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
message msg_type;
BEGIN
dequeue_options.msgid := descr.msg_id;
dequeue_options.consumer_name := descr.consumer_name;
DBMS_AQ.DEQUEUE(queue_name => descr.queue_name,
dequeue_options => dequeue_options,
message_properties => message_properties,
payload => message,
msgid => message_handle);
pkg_2.create_thing( p_thing_id => message.thing_id );
UPDATE table t
SET creation_complete = 1
WHERE id = message.thing_id;
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
plog.error(SQLERRM);
plog.full_call_stack;
END create_thing;
PROCEDURE delete_thing ( context IN RAW,
reginfo IN sys.aq$_reg_info,
descr IN sys.aq$_descriptor,
payload IN RAW,
payloadl IN NUMBER )
IS
dequeue_options dbms_aq.dequeue_options_t;
message_properties dbms_aq.message_properties_t;
message_handle RAW(16);
message msg_type;
BEGIN
dequeue_options.msgid := descr.msg_id;
dequeue_options.consumer_name := descr.consumer_name;
DBMS_AQ.DEQUEUE(queue_name => descr.queue_name,
dequeue_options => dequeue_options,
message_properties => message_properties,
payload => message,
msgid => message_handle);
pkg_2.delete_thing( p_thing_id => message.thing_id );
COMMIT;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
plog.error(SQLERRM);
plog.full_call_stack;
END delete_thing;
END pkg_1;Following is the code to create the queue:
BEGIN
SYS.DBMS_AQADM.STOP_QUEUE ( QUEUE_NAME => '<queue name>');
SYS.DBMS_AQADM.DROP_QUEUE ( QUEUE_NAME => '<queue name>');
END;
BEGIN
SYS.DBMS_AQADM.CREATE_QUEUE
QUEUE_NAME => '<queue name>'
,QUEUE_TABLE => '<queue table>'
,QUEUE_TYPE => SYS.DBMS_AQADM.NORMAL_QUEUE
,MAX_RETRIES => 5
,RETRY_DELAY => 0
,RETENTION_TIME => 0
,COMMENT => 'Queue for processing creation of things'
END;
BEGIN
SYS.DBMS_AQADM.START_QUEUE
QUEUE_NAME => '<queue name>'
,ENQUEUE => TRUE
,DEQUEUE => TRUE
END; -
Hello, I live in the German speaking part of Switzerland (and have a credit card address here too) but want to watch films in English, Italian, or French. Why are films not available in these other languages ? Unless I am mistaken, iTunes Switzerland is far from Swiss and does not encourage its people to watch films in the local languages of its country (at least French and Italian would be good too...). Can anyone help ? Do I have to move to Geneva to watch a non French film in French or Lugano to watch a non Italian film in Italian or simply buy a DVD to get round it?
I have the same problem. I want to watch any movies in French (in the original, or subtitled and/or dubbed). But I cannot seem to find any on iTunes. Does iTunes offer any content in other countries (I live overseas) in the languages of those countries?
-
After syncing my music onto my iphone5, why are songs grayed out and not playable
after syncing my music onto my iphone5, why are songs grayed out and not playable?
If you are syncing music to the iPhone automatically, you won't be able to drag and drop tracks on to the iPhone and the music will be grayed out.
You'll have to Manually Manage the music.
Configure iPhone, iPad, or iPod for manual management
If you have iTunes 7 or later*, follow these instructions:
Connect the device to your computer.
Open iTunes.
Select iPhone, iPad, or iPod in the Devices list.
Click the Summary tab and select "Manually manage music and videos".
Click Apply.
Even when you have enabled manual management, you can still sync some content automatically. Select any content tab, such as Video, to enable automatic syncing for that type of content. -
Since iOS 8 and subsequent upgrades my iPad air keeps kicking me off wi-if if Apple are aware why are they not fixing the **** thing. C'mon Apple up your game and look after your custome
Everyone here is an end user like you, not Apple representatives. To report to Apple, please use this link:
http://www.apple.com/feedback/ipad.html -
Why are cookies not deleted when I close Firefox?
Hey,
My problem is that I set Tools / Options / Privacy / History to "Use custom settings for history", and then under cookies I set Keep until: to "I close Firefox".
Yet, when I close my browser and restart none of the cookies are deleted. If I save my tabs, I stay logged in on the websites that are open on the saved tabs. But even if I close the website, and then quit. And then reopen the website after launching Firefox again, I am still logged in. Whereas Firefox is set not to remember any of my usernames or passwords, so the only way this can happen is via cookies. Therefore, the cookies are not deleted. But I can also see it in the list of cookies: it's full of old stuff.
So why are cookies not deleted despite this setting?
Firefox has beeen pretty soft on privacy lately, and frankly I don't understand why. The possibility to have history older than X days automatically deleted has also been gone for a long time, and now this cookie setting doesn't work, either.Hi madperson,
I turned this setting on a long time ago. Basically, it's one of the first things I do after installing my OS and Firefox. So there shouldn't be so many old cookies there.
But anyways, just now I deleted all the cookies manually via Tools / Options / Privacy / Show Cookies / Remove All Cookies to be sure that all the old stuff is wiped out. And yet it still doesn't work.
I logged in to my Gmail account (the Remember Me box ain't checked), closed the tab containing my Gmail account and then closed Firefox. After that I verified in the Task Manager that firefox.exe is indeed not running anymore. So Firefox definitely shut down properly. Then, I restarted Firefox and opened a tab, entered gmail.com, and I was still logged in, therefore the cookies were not deleted.
I have the 10.1.101.000 version of ZoneAlarm, which as it turns out after googling it is indeed not the latest version (it was released in March 2012). The ZoneAlarm Firefox add-on that automatically comes with the firewall is disabled in Firefox. -
In Photoshop CC 2014, why are strokes not perfect 1px strokes as they were in the previous PS version? They are thicker/blurry on some sides!
See if turning on "Align Edges" helps: Align and Snap to Pixel Grid in Photoshop « Julieanne Kost's Blog
-
Why are lyrics not viewable in itunes in the same way as on the ipod?
Why are lyrics not viewable in itunes in the same way as on the ipod? In itunes all you get is "Get Info" then "Lyrics" and that screen then locks itunes until you close it. Inflexible, annoying and surely unnecessary?
All songs need Album, Artist and title.
Also, look under Artist -> Compilations. -
Why are books not available even though they appear as search results in Apple Canada iBook Store?
You can only buy from your own country's store - to be able to buy from another country's store you need a valid billing address in that country and be in that country when buying from it. You can try requesting that they be added to US store, but ultimately it's the book's publisher that will have to grant Apple a license to sell it there : http://www.apple.com/feedback/itunes.html
Are they available in other ebook stores/apps that you have access to e.g. Amazon/Kindle, Nook, Kobo etc ? -
SnippetPreview$.htm - Why are these not being deleted?
I have the following files in my project folder:
SnippetPreview$.htm
SnippetPreview1$.htm
SnippetPreview2$.htm
SnippetPreview3$.htm
SnippetPreview4$.htm
I noticed them because they are not in Visual SourceSafe so they appear when I go to add files to VSS when I create new snippets. They contain the text of snippets I've created.
I know they are harmless, but why are they not being automatically deleted from RH when no longer needed?
Is this a setting or preference I can set?Sometimes temporary files are left behind. These are just files created on previewing a snippet and like any other temporary files are not deleted. Just delete them.
The RoboColum(n)
@robocolumn
Colum McAndrew -
There are a few tv shows that played this week that are not available on itunes from tnt. Why are they not available for download. We watch these each week, and I have checked to be sure that there was actually an episode this week, and there was.
Under other "sync-able" players, there's usually the "Sync only checked items" radio button. Not for the 2.0 Apple TV. There's no option, but acts as though that option ("sync only, etc...") has been selected. Figured it out after an hour of walking back and forth from my Mac to the TV. Argh.
Try it. De-select the shows, sync the AppleTV and look under the "TV Shows" and the one's you've unchecked will not be there.
R,
the wedge -
Why are all my movies and tv shows from my library now on my ipad with the icloud icon? I have turned off all icloud related services. I have never used it. On top of that, my ipad now gets stuck on step 5 of the sync - waiting for changes to be applied and never finishes.
HelpHi, go in Settings, under Videos turn off "Show all videos" this will remove the purchased videos to be displayed in the Video app. The same can be done with the music.
As for Step 5, connect you iPad and on the summary Tab, uncheck
"Sync only checked songs and videos". Then wait, it takes a while but this made it work for me after many restore attempts.
good luck -
Why are the threads start and terminate randomly?
Hi there,
I got the program below. I am wondering why are the threads start and terminate randomly? Everytime, I run the program, it produces different results.
I know that these four threads have got same normal priority (should be 5), and under windows there is something called timeslice. Then these four threads rotate using this timeslice. How do we know what exactly the timeslice is in seconds? If the timeslice is fix, then why the results are ramdom?
Thanks in advance!
* To change this template, choose Tools | Templates
* and open the template in the editor.
package mythreadone;
* @author Administrator
public class MyThreadOne implements Runnable {
String tName;
Thread t;
MyThreadOne(String threadName) {
tName = threadName;
t = new Thread(this, tName);
t.start();
public void run() {
try {
System.out.println("Thread: " + tName);
Thread.sleep(2000);
} catch (InterruptedException e) {
System.out.println("Exception: Thread "
+ tName + " interrupted");
System.out.println("Terminating thread: " + tName);
public static void main(String args[]) {
// Why are the threads start and terminate randomly?
new MyThreadOne("1");
new MyThreadOne("2");
new MyThreadOne("3");
new MyThreadOne("4");
try {
Thread.sleep(10000);
// Thread.sleep(2000);
} catch (InterruptedException e) {
System.out.println(
"Exception: Thread main interrupted.");
System.out.println(
"Terminating thread: main thread.");
1. Firstly, I set in the main function:
Thread.sleep(10000);
and I run the program it gives:
Thread: 1
Thread: 4
Thread: 2
Thread: 3
Terminating thread: 1
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
Run it again, it gives:
Thread: 2
Thread: 4
Thread: 3
Thread: 1
Terminating thread: 2
Terminating thread: 1
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
And my question was why it outputs like this? It suppose to be:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 1
Terminating thread: 2
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
Why these four threads start and finish randomly each time I run the program? I use Windows, suppose there is a timeslice (i.e. 1 second), these threads have the same priority. Then the threads should start and finish in turn one by one. Am I right?
2. My second question is:
When I change the codes in the 'main' function into:
Thread.sleep(10000); -> Thread.sleep(2000);
it gives me the results like:
Thread: 1
Thread: 4
Thread: 3
Thread: 2
Terminating thread: main thread.
Terminating thread: 1
Terminating thread: 4
Terminating thread: 3
Terminating thread: 2
BUILD SUCCESSFUL (total time: 2 seconds)
Run it again:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: main thread.
Terminating thread: 4
Terminating thread: 2
Terminating thread: 1
BUILD SUCCESSFUL (total time: 2 seconds)
I tried several times. The main thread always terminates before or after the first child thread finished.
My question is why it doesn't output something like:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: main thread.
Terminating thread: 1
BUILD SUCCESSFUL (total time: 2 seconds)
or
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 3
Terminating thread: 4
Terminating thread: 2
Terminating thread: 1
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 2 seconds)user13476736 wrote:
Yes, my machine has multi-core. Then you mean that if I got a one core machine the result should always be:
Thread: 1
Thread: 2
Thread: 3
Thread: 4
Terminating thread: 1
Terminating thread: 2
Terminating thread: 3
Terminating thread: 4
Terminating thread: main thread.
BUILD SUCCESSFUL (total time: 10 seconds)
???No.
>
How to explain my second quesiton then? Why the main thread always terminates before some of the child threads end? Thanks a lot. -
Why are contacts not showing up after added
why are contacts not showing up after added. Don't show up after they added when I want to select then for a new email
I am replying to my post with the hopes that someone can please help me!
I am adding new episodes, but they don't show up on the main page. The most recent one to show up is from 10/29/07. I added a new episode today, but it doesn't appear on the main page (before you subscribe). Is there a limit to the # of podcasts that can appear on the main page? Has anyone else had this problem? All the relevant info is above.
Your help is much appreciated.
Message was edited by: oneness_podcaster
Maybe you are looking for
-
No data in RSA3 for 2LIS_11_VAITM and 2LIS_11_VAHDR
hello experts, i want to extract data from 2LIS_11_VAHDR and 2LIS_11_VAITM but dont see any data in RSA3. I have already activated the datasource in RSA5 and LBWE. After running the setup tables using OLI7BW i still dont see any data in RSA3. Pls adv
-
What are the application components for Marketing
Hi,Guru's I've got confusion about the application components which are supported by SAP CRM for Marketing for a implementation project ? And how would be the landscape for Marketing ? can you describe me. Regards C.R.Gupta Edited by: CR.Gupta on Mar
-
Keep Time Codes in Final Output?
For various reasons I won't bore you with here, I want to show the time codes in my final output. I have them (audio and video) on the canvas, and it's exactly what I need, but I can't seem to permanently keep them with my video. They disappear when
-
I love Spotify, and have been a devoted user for about a year now. I was using the Premium feature for a while, but hit a bit of a rough patch in terms of funds and, sadly, had to downgrade to the free version of Spotify. Now that I am working and en
-
Re: shared variable: create programmatically then read/write
I programatically create and destroy Shared Variables using these subVIs (see enclose llb file for Add Variable Connection.vi and Delete Variable Connection.vi). But it seems to take a long time to run each subVI. This might be tolerable for a sing