Why are my photos on iPhone not showing up on the iPad?

photo stream is on both the iPad and iPhone but the pics on my iPhone are not showing up on the ipad

I'm not sure how true this is..... Then again I'm not sure I totally understand this whole cloud thing yet. But I have 742 photos on my photo stream on my iPhone and only 144 of them on my iPad. I turned off photo stream on the iPad and turned it back on and it loaded even less then the original 144 pics. I'm at a loss. They were all synced with my iPad until recently.  And if this statement is true about syncing only the new ones since turning on photo stream then my iPad photo stream would have loaded zero pics. What happened?

Similar Messages

  • HT3965 Why are my photos from iPhone NOT coming up on my iPad.  Same account for iCloud??

    I can't sync photos from iPhone onto iPad. I have same iCloud acct for both

    If you are talking about PhotoStream then it only transmits newly taken photos or just saved saved photos. Of course you have to turn PhotoStream On on each of your devices. See Settings > iCloud > Photos > Photostream.
    If you just want to move selected photos between devices you can use an App like Photo Transfer:
    https://itunes.apple.com/us/app/photo-transfer-app-easily/id365152940?mt=8

  • Why are my Photos from iPhone not showing up in iPhoto during sync? (with and without USB)

    I have chose to deactivate Photostream.
    But.. Why aren't my photos syncing from my iPhone Camera Roll (New Photos) into iPhoto or anywhere on my Mac?
    This is frustrating. Have tried numerous syncs with no results..
    Used Wi-Fi Sync and USB sync .
    Someone please advice . Thanks!
    Message was edited by: sketchwish

    Someone actually responded to me in another thread:
    https://discussions.apple.com/message/16418849#16418849
    Told me to try unchecking the box to sync Photos.
    Do a sync.
    Then check the box.
    And sync again.
    Going to try that now. Let me know if it works for you James
    Cheers

  • Why are my photos from iphone not on my computer?

    why are my photos from my iphone not on my computer?

    Someone actually responded to me in another thread:
    https://discussions.apple.com/message/16418849#16418849
    Told me to try unchecking the box to sync Photos.
    Do a sync.
    Then check the box.
    And sync again.
    Going to try that now. Let me know if it works for you James
    Cheers

  • When I create a playlist and sync it to my iPhone not all of the playlist transfers over.  All of the songs are there and are playable they just do not show up on the playlist.

    When I create a playlist and sync it to my iPhone not all of the songs on the playlist transfer over.  All of the songs are there and are playable they just do not show up on the playlist.  For example, in itunes on my computer a playlist has over 100 songs, but when I sync my phone, my iphone only shows 60 songs.  I can go into my phone and add the missing songs to the playlist, but the next time I sync my phone the songs are gone again.

    Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
    Here's that thread...
    https://discussions.apple.com/message/16903613#16903613

  • How do I transfer photos from iphone to itunes then to the ipad?

    How do I transfer photos from iphone to itunes then to the ipad?

    1. Copying personal photos and videos from iPhone, iPad, or iPod Touch to your computer, http://support.apple.com/kb/HT4083
    2. iPhone, iPad and iPod touch: Syncing photos via iTunes, http://support.apple.com/kb/HT4236

  • Why are all my movies and tv shows now on my ipad with the icloud icon?  How can i get rid of them?

    Why are all my movies and tv shows from my library now on my ipad with the icloud icon?  I have turned off all icloud related services. I have never used it.  On top of that, my ipad now gets stuck on step 5 of the sync - waiting for changes to be applied and never finishes.
    Help

    Hi, go in Settings, under Videos turn off "Show all videos"  this will remove the purchased videos to be displayed in the Video app.  The same can be done with the music.
    As for Step 5, connect you iPad and on the summary Tab, uncheck
    "Sync only checked songs and videos".  Then wait, it takes a while but this made it work for me after many restore attempts.
    good luck

  • Why are my deleted imovie events not showing up in mac trash?

    I dleted an event in imovie on my macbook pro, it dissappeared, but I can't for the life of me find it in my mac trash.

    No solution to offer, but I can say that you are not alone. I am having the same exact problem.
    I installed "Photos" around April 8. "My Photo Stream" shows up in the sidebar containing pictures up through April 6 - nothing later. Photos taken with my iPhone since then do not show up.
    My iPhone and iPad both have Photostream on and working. Photos taken with either show up almost immediately on both devices. It is only "Photos" on the desktop machine which is broken. Like you, I have tried turning Photostream on/off, restarted both desktop machine and phone. Nothing.  "Photos" photo stream is stuck in time at April 6.

  • Photos from iPhone not showing on iMac

    I have taken several pictures today with my iPhone and after several hours, they are not showing in Photos on my iMac.  Pictures that I have imported to the iMac are showing on the iPhone.  I have set up both devices to use iCloud and both devices appear to be set correctly.
    How long should it take for pictures from iPhone to appear on the iMac?
    Help!!
    Thanks!

    A couple of thoughts here - have you updated both devices to latest OS operating system? Then make sure that you have signed out of iCloud on both devices at the same time.  You might check to see if you have any photos on the iCloud website as well.  If you do, decide if you want to deleter them or not?  I used my iMac as the base file since it had all of my picture history.  When this is done, turn on iCloud Photo on your Mac either using System Preferences or opening Photos and turning in iCloud Photo.  If you have a large number of photos and videos, the sync process the first time is going to take time. I have over 9500 pics and videos in my collection, and it took almost 4 days to get through this.  Also - check to make sure you do not have energy saving settings that disconnect the Mac during this process.  Let it run - it should complete.  You can check progress in Photos and see when this is done.  Then when all photos and videos are sync'd,, then turn on the iPhone and let it run until done.  This will also take time depending on the size of your file.
    If you are not getting connected - make sure both devices are signed into the same iCloud account.
    Here's hoping this might work!

  • Why are my photos from iPhone disappearing? Why do I now have several iPhoto libraries?

    Hi!
    A while ago, I realized that all my photos from iPhoto were missing. Apple told me that I accidentally deleted them from the applications folder. This has happened again a couple times now. I have been backing my photos up with a hardrive, and for some reason I now have several libraries, all containing different photos that I once thought had been deleted. Is it possible to have only one iPhoto librbay instead of several? And why is it that sometimes when I open iPhoto, all my photos are suddenly missing?
    Stasia Stass

    Hi ...
    Photos are not stored in the Applications folder, only Applications.
    If you are using iCloud, open System Preferences > iCloud. Deslect the box next to Photo Stream off then back on. Give iCloud a few minutes to re sync your photos.
    If you are not using iCloud, try rebuilding the iPhoto library.
    Instructions >  iPhoto 6 and later: Rebuilding the iPhoto library

  • Why are 16x9 photos from PSE8 not filling screen when exported to PRE8?

    I batch cropped a bunch of photos to (JPEG) 16x9 and created a slideshow in PSE8 (about 100 slides, 3.2 sec duration, random pan/zoom, random 1 sec transition). I had to click on each photo "properties" and choose "fit on slide" since it was defaulting to "crop to fit" (which was further cropping my 16x9 photos down to something not desirable).
    When I "Output to PSE8" it shows up in the sceneline as not filling the entire space. If I click on this slide show in PRE8 and use the "properties" then "motion" and increase the size of the pictures, they come out blurry. However, if I insert one of the 16x9 photos directly into PRE8, it fills the entire screen and is perfect focused.
    PLEASE tell me there is an easier solution than having to create the entire slideshow in PRE8. I really like the random transitions, easy batch duration pan/zoom, control.

    Thanks for such a quick response Steve. I will attempt to add more information to help clarify your addtional quesitons
    The pan and zoom I am using is the default (very minor- just enough to give the perception of movement).
       If I import directly into PRE8 the picture(s) look perfect. It just seems to occur after I port to PRE8
    I am not sure what workflow I am following but will be a bit more specific as to the steps I have been taking:
    1. I open the PSE8 workspace and choose "organize" (not edit)
    2. I click on "create" then click on "slideshow"
    3. Next I set my specific defaults (for this project) 3.2 sec interval, 1 second Random transitions, apply pan and zoom to all slides and leave the "crop to fit slide-landscape" checked ( thanks for the tip to uncheck this next time, so I dont have to do it to every slide!!)
    4. I then import my media from "add media" "photos and videos from folders" place the photos in the order i am looking for then save the project.
    5.I next click "output" and "edit with Premiere Elements" - which open PRE8
    6. in PRE8 setup I choose the "HDV 1080i 30" configuration.
    The slideshow has now ported over to PRE8. The slideshow bundle does not utilize all of the space in the sceneline, hence my problem (black bars top and bottom of screen). Ironically, when I import via get media (directly from PRE8) the same pictures from my computer file (not in the organizer), they fill the entire space in the sceneline (no black bars on top or bottom).  I have this problem regardless of whether or not I am using the pan/zoom or the unchecking of crop to fit slide landscape in PSE8.
    I can send a screen print if you think that might help??
    I sure hope this helps, all the other video items that are not related to this slideshow are perfect and this is killing me!!
    Thanks, again, Mike

  • Photos on iPhone not Showing on iPad and no photos in events Help

    Synching has been working. I have not altered any settings but now photos not sharing also photos not showing in events.

    Go to iCloud Prefs on your iPhone / iPad and turn off the contact syncing, it will ask if you want to erase your contacts from your device, say yes. After that, turn it on again and just wait until all your contacts sync again.
    That worked for me!

  • Central Search - why are my config criteria settings not showing?

    Hi
    I have set up the central search feature and and it works well. The SAP standard criteria attributes are displayed. Using the configuration tool on component BP_HEAD_SEACH I have chosen to display only:
    Name1 / Last Name
    Account ID
    Employe Resp - Last Name
    Marketing Attribute
    Contact - Last Name
    Role Config Key: ZGL_AB_BM
    Component Name: BP_HEAD_SEARCH
    Component Usage: Search
    Object Type: <DEFAULT>
    Object Subtype: <DEFAULT>
    In the selected search criteria both the Displayed and Use in Central Search columns have been checked.
    When I go to test my changes, the 5 search criteria above are shown in the drop down boxes in the work center page but the drop down context menu underneath My Saved Searches continues to show the standard SAP criteria. It does not seem to implement the config changes I made.
    Am I missing something?
    Regards
    Declan

    I have now got this working.
    The central search will work with SAP note 1293695: Central Search Menu - Use Configuration of UI Object Type implemented and with the following config attributes:
    Role Config Key: <Role Config Key>
    Component Usage: <DEFAULT>
    UI Object type: <DEFAULT>
    Object Subtype:<DEFAULT>
    Also worth mentioning is that the search objects offered in the central search menu is cached in a server cookie by role and language. By default it expires after an hour and the next user who starts the application after this rebuilds the cache - which may take usually 30 seconds up to a minute for a particular user and a business role.
    As a consequence customizing changes related to the central search are not visible right away. The cache can be invalidated manually via method CL_CRM_CENTRAL_SEARCH=>CLEAR_CACHE using the SE24 and its Test-Button. Alternatively you may set the user parameter 'CRM_CENTRAL_SEARCH' to 'REBUILD_MENU': In this case the menu is rebuilt with each application start for the corresponding user and the business role used.
    Hope this helps other users.
    Cheers
    Declan

  • Why are my third party keyboards not showing up?

    I have an iPhone 5S running iOS 8.0.2 . So recently, my third party keyboards on iOS 8 have not been working. When i select to use the third party keyboard (e.g. SwiftKey, Swype, TouchPal) the keyboard window does not slide up, or in the case of the search bar on the home screen a gray box slides up in place of the keyboard. It started in iOS 8.0.0 but i figured iOS 8.0.2 would help fix the problem, but the problem persists. I have tried removing the keyboard from settings, as well as deleting the keyboards and reinstalling them, but nothing seems to be working. Any help would be much appreciated

    I'm not sure how true this is..... Then again I'm not sure I totally understand this whole cloud thing yet. But I have 742 photos on my photo stream on my iPhone and only 144 of them on my iPad. I turned off photo stream on the iPad and turned it back on and it loaded even less then the original 144 pics. I'm at a loss. They were all synced with my iPad until recently.  And if this statement is true about syncing only the new ones since turning on photo stream then my iPad photo stream would have loaded zero pics. What happened?

  • Why are my apps and others not showing on itunes?

    I recently moved my itunes folder to an external hard drive. Since then my apps, ringtones and books are not showing on itunes when loaded up on my laptop. Music, films and tv programmes are all fine and playback fine.
    I have checked the itunes media folder on the external hard drive to make sure they are there to which they are, they are also in there respective folders inside the media folder.

    http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Haaga" <[email protected]> wrote in message
    news:e4t6bv$olq$[email protected]..
    > Any idea where I could find a list of "standard" fonts
    or colors?

Maybe you are looking for

  • Availability check on schedule lines of contract

    Hi, We have maintained 2 line items (L1 and L2) with same material (M1) in contract. Also these two line items have schedule lines maintained. e.g. L1  :  S1,S2 L2 :   S3,S4 Now we create a sales order in reference to line item L1 and do an availabil

  • 3.1.2 Not working???

    I have had the problem where i wont be able to recieve any calls or texts etc. and was really hoping 3.1.2 would solve this but to much dismay my phone is still experiencing the exact same problems. Everyone looks like they have had success with the

  • Problems with NVL in sql plus

    Hello. I get error message when i use NVL function in sql statement. Example: select something from table1, table2 where table1.id = table2.t1_id and NVL(table1.temp,1) I get:ORA-00920: invalid relational operator

  • HT204391 How come Apple can't use its own software to create this guide as a pdf or an iBook?

    Does Apple actually use its own software? The woefully few manuals it manages to provide now are all created in Indesign and desperately need the critical eye of an editor to correct the errors, ommisions, obsolescence and plain confusing statements.

  • Why is the black hinge wearing and cracking away?

    The black hinge on my Macbook Pro seems to be cracking and chipping away. It looks like it's just a plastic/paint on the top, but it keeps chipping off, more and more. I have not dropped it. When it is not in use, it is always in a soft case. What sh