Why are my podcasts running too fast

my podcasts and audio books run too fast so the speech is too quick to listen to, my music seems ok - anyone experienced this problem or got suggestions for me?

Slightly below the scrubber bar the is a box with either 1/2X. 1X or 2X. Those are the playback speeds. Tap on the box to change/cycle through the speeds.

Similar Messages

Are my fans running too fast?

Hello,
recently I got my rMBP; the basic specs, I am really happy with it, no displays issues or any wierd sounds, but when my Mac gets a bit higher load (e.g. playing Trine 2, my MBP gets around 60 degrees celsius at CPU and 65 at GPU) the fans run at around 5000 rpm, while the left fan is alway faster by about 300 rotates. Hands down, the sound is ok, but I am worried about the speed, is it normal to get such high rates? At minimal load, it is about 1900 rpm so you can't hear it all.
Thanks for all your answers

I've seen fan speeds close to 6000rpm reported here, so I wouldn't worry. The computer is doing what it is supposed to do: increase the fan speeds as needed to keep it cool. Enjoy your new computer.

Why would my video clips be running too fast when played on the monitor panel?

I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
My main question is: "why would my video clips be running too fast when played on the monitor panel ?". This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline. I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline. They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes. I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ? Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips. They are in their original state.
Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
Help would be greatly appreciated.

Yes, that is what the problem was.
Although the video camera on my Nokia N8, mobile was capturing at 25fps,
for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps. Once in Interpret Footage I was able to change the fps to 25.
Thanks for the help.

Time is running too fast

Hi there
I've got an iphone 2g, FW 3.1.3 and a very strange issue:
The clock is running too fast. After one day the time on my phone is 1 hour ahead ( 1hour/each day). When i connect and sync, the time on my phone jumps back to the normal time, the time on my macbook.
I did a total reset (came from version 3.0), but with no luck.
Ive got no option "Set time automatically" in my Firmware version.
I hope somebody has any idea what's going wrong.
Thank you for reading anyway.
regards
Pedro
Message was edited by: Pedro1982
Message was edited by: Pedro1982

Thanx, that helped!!!
Turned out that one of my homes' NLS_LANG had norwegian_norway and the others had american_america. As soon as I changed the norwegian to american, Forms started and I let go a huge sigh of relief :-))
Thanx again!

Why are my podcasts being deleted from my iPhone every time I sync them?

why are my podcasts being deleted from my iPhone every time I sync them?

I also have this problem though it only seems to affect my iPod Nano (6th gen). It does not seem to affect my iPhone (though now as I type this, I better confirm that as I haven't manually managed podcasts on my iPhone since the last iTunes updates). I have iTunes set to "manually manage music and videos" (just like OP, I'd rather manage music and videos myself rather than construct playlists and have iTunes sync them), and under the "Podcasts" tab on my nano, I do not have "Sync Podcasts" checked.
Is this something that has occurred since the last iTunes update?

Recorded video is not natural and runs too fast.

Hi,
I am facing one of the very strange problem with my cameras and I am not sure whether some unintentional setting is causing that.
When I record the video and try to play it the video does not look natural and runs too fast like 5 min video finishes in 3:20 minutes.
Any ideas what may cause this as until now it was working fine?
Thanks and regards,
Sanjay.

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
What wre you using to playback the recorded video? If it is the video monitoring software from Cisco, what is the version number?
Thanks
Eric Moyers
Cisco Network Support Engineer
SBSC Wireless and Surveillance SME
CCNA, CCNA-Wireless
1-866-606-1866

My nano plays back itune podcasts at too fast a rate.

Hi All! My nano plays back itune podcasts at too fast a rate. My iMac does not do this with the same podcasts. If I have my nano connected to my iMac and use it (the nano) to playback thru my computer monitors- it's fine. Unplug it and use earbuds and it's too rapid!? Did my nano drink too much coffee? Thanks, Michael

O.K. Finally figured it out... Podcasts have a 1/2x, 1x and 2x speed setting on one of the windows that will change the playback speed. Never Mind!

Why are my Podcasts not showing up as Categorized?

I have 5 Podcasts listed on iTunes. They can be found by running a search for: revneal's . Each of these podcasts has keywords and is categoriezed under Religion & Spirituality and Christianity. Unfortunately, and for some reason that I cannot figure out, my podcasts cannot be found listed under the browse feature. When I first began my first two podcasts showed up as-categorized, but not any more.
Here are my podcast links:
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=79104672
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=78944747
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=219121094
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=219640824
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=219552967
G4 PowerBook Mac OS X (10.4.9)

I refer you to this thread: Changing category/genre
I'm afraid the answer is not very satisfying.
Peach

My podcasts play too fast in my iphone

I did not had a problem before but now with the same podcasts I use to listen to they play too fast. You can still understand them but it is not pleasant at all. Does anyone has the same problem and was able to solve it?

It's likely you accidentally touched the button that speeds up playback to 1.5x.

Why are you updating Firefox so fast? I get problems with my Internet Bank every time before they have updated their software. And by that time you already have a new version.

I get a popup that tells there is a new version and I don't know how to get rid of it.
As I have said in the question I get problems when you are updating too many times in a year.
I didn't know where to ask this question. Maybe there is a better place, but I could not find it.

Thanks for the suggestions. I did finally find out that I could uncheck Firefox update and wait until my bank have done their update. (And I can of course use Internet Explorer...) But I still think you make new versions too fast.

Fans running too fast on MBP Core II Duo

Hi there,
I'm starting a new post 'cause the older one was getting unfruitful. Let me wrap up quickly. I've got both a MBP Core Duo and a MBP Core II Duo. I had notice that the fans on my MBP Core II Duo were very noisy compared to the MBP Core Duo. So I ran smcFanControl (NO I HAVEN'T CHANGED THE SETTINGS AND NO smcFanControl ISN'T BAD FOR YOUR COMPUTER), I just used it for MONITORING PURPOSES. Ok.
I've capture both results in movies so you can see the differences. I've used a cloned system and compiled some code to give the cpu some meat. Here are some behaviors I've noticed:
http://web.mac.com/michaf/iWeb/MacBook%20Pro%20Fans/MacBook%20Pro%20Fans.html
(Just run both movies at the same time)
1) The MBP Core II Duo runs at a minimum of 2000 rpm vs 1000 for the MBP Core Duo
2) The MBO Core II Duo shoots very quickly and hangs it's fans much higher.
3) After a while the MBP Core II Duo has a temp of around 68 with fans running at 4500! The Core Duo instead at a similar temp is down to 2300!
I'm recording with my machines and it's barely usable with the fans.
Has anyone noticed the same thing or is it my machine?
Micha

The movies in your link don't appear to be working so can't comment on those.
Your post confirms what I suspect is true about C2D temps compared to CD temps, which is that the C2D is fundamentally no cooler (possibly hotter) than the CD, but Apple have doubled the fan speed in the C2D to make the C2D run cooler.
Seems to me that Apple bent over backwards to make the CD quiet, and this resulted in them running too hot, and with the C2D they have swung the other way.
I am using Fan Control 1.1 on my CD to steer a middle course. I have left it with 1000 rpm min but set it to start ramping the fan speed earlier and more steeply as temp rises. So most of the time it is quiet, and high temps which can be reached with the Apple settings are avoided.
Doesn't help your C2D problem much except to suggest that you use Fan Control 1.1 to devise settings to suit your purposes. I suggest you have Hardware Monitor on continuously (hidden) so that you see what has happened to the temp over typical working sessions using different settings in Fan Control. When you have found what works you don't need to keep Hardware Monitor active.
C2D can't need 2000 rpm the whole time!
Mike

Fans running too fast-6K rpm

I noticed the fans running fast a couple days ago. There does not seem to be a reason of this—temps are low (I think): nothing is reading higher than 46°.
What might be causing this? What should I do about it? Is there a danger aside from burning out the fans?

There are a couple of other things to try:
Open Activity Monitor and see if you have an out of control process. Select "All Processes" at the top and CPU in the bottom bar. Look for something hogging the CPU. Sometimes a printer process will hang up and do this, but it could be almost anything.
Run the extended version of the Apple Hardware Test. It may be that a thermal sensor has failed or become unplugged, and if so, the fans are set to run all out by default.
Burning out the fans is the first danger. Burning out your computer because the fans aren't cooling it is the next danger.
Good luck!

Why does my battery run out fast?

My battery on my iPhone 4S is always running out fast. I have to charge it multiple times in a day. I delete the running apps, but it still doesnt work.

Maybe because you never put it down.
Maybe because you never allow it to go to sleep.
Maybe because it is constantly checking email.
Possibly because some app is running using location services.
Try a search of the forums for battery issues, you'll find many threads with steps that can be taken to mitigate battery usage.
Depending on what I'm doing... I can easily make it through a full day on a single charge or completely drain the battery in about 6 hrs.

Uncompressed 8-bit running too fast

Hi all,
I've just been given a project in which , for some reason, the footage has been captured using two settings on two different versions of Final Cut.
The DV-Pal captured footage is fine, but there is also uncompressed 8-bit footage and this plays back too fast. It appears to be a 24fps/25fps problem - when I set it to play back at 24 it's fine.
Is there an easy way to either convert it or set it to play back at the slower speed combined with the other footage at normal speed?
Thanks,
Tom

You can scroll in the browers to find the frame rate of this footage.
PAL needs to be slowed down by 4%. You may want to convert PAL to NTSC in Compressor or look into the Nattress plugins to see if he has an easier solution.
http://www.nattress.com/
Good Luck
Z1

Videos run too fast with latest Flash player

I am trying to learn a 3D program and some of them use Flash Player to run. But when I run the video, they run so fast that I can't keep up with them. There is no audio with the video tutorial as it is just a video. Any suggenstion as to how I can slow the videos down so I can keep up with the tutorial? Any and all help will be appreciated.

If they're FLV files, I'd recommend VLC media player. IT has "speed controls" in the interface that Flash Player doesn't. They range anywhere fom half speed to 1/32 to frame by frame if necessary.

Why are my podcasts running too fast

Similar Messages

Maybe you are looking for