Why are my render files in my boot drive/root directory?

I have configured FCP to use an external drive for my Scratch Disk to render Video Capture, Audio Capture, Video Render and Audio Render as well as the Waveform Cache, Thumbnail Cache and Autosave Vault. Plenty of room on it and for the most part, I see a lot of render files on it, just like it should do.
However, if I leave FCP running for a while, it will start to auto-render again and does so placing tons of huge files on my local boot drive right on the root directory under a folder called "Render Files". It ends up filling up my boot drive every time and need to delete them.
I have searched everywhere to find where to configure this to move it to my scratch drive, but no joy.
How do I get FPC to render these files on a non-boot drive scratch disk?
Thanks.

That's possible that's it going to sleep. But I don't think so. The problem happens when I let the editor sit too long without doing anything in it (get up for a cup of coffee, using another application to generate some text effects, etc). Then its starts rendering on its own and does so only with the local boot drive/root directory.
When it comes back, the "green line" (Preview Render) is gone and the lines are replaced with dark blue, which I think indicates the sequence was rendered in the highest possible res/codec I have selected. That's fine, but why does it insist on using the local drive when I have another specified?

Similar Messages

  • Why are my render files INSIDE my FCE app?!!!

    I am really puzzled. I've let this massive video project of animated stills, narration, and sound effects sit for a year. The files got on two machines and when I went to work on it while traveling, it was quite a job to gather it together onto my laptop.
    I had some bugs in the narration that just wouldn't mixdown correctly until I manually pulled out some duplicate files that were competing. They would come back as before due to some cache/backup system. I finally rendered the offending sequences until they worked properly.
    Now, after I had gotten Episode 1 to the place where I could burn it to a DVD (it is 55 minutes long), I found I had no headroom on the main disc (I started this project on my present laptop seven years ago and I kept using FCE 2 until the project is finished (hopefully, very soon! There are three episodes @ 55 minutes).
    This is the home stretch and I want to get it into shape to pass it onto others to modify as needed. When I used Omni Disksweeper to find where I could reduce the files on my main disc, there was a big lump coming from my FCE application! I had to open the database packaging and, lo and behold, there were sequence files right there!!! How can that be?!!!
    So, my question, here, is mainly this one:
    1. How can I find all the files that FCE is using for this episode of 7 sequences so that I can hand them over with FCE 2.0.3 to those who are going to modify it for other applications at a future date? As you can see above, these files have ended up in the strangest places and I don't have a list that takes me back to all the rendered root files! They are scattered. How do I know which ones to gather and from where?

    Well, Tom, this is quite the anomaly, then. I wish I could post a picture of these two files in the actual FCE application package! It is both the Audio & Video Render folders with rendered sequences! Totally bizarre (I could post a picture of it to you). If you open the FCE application, you get the Content folder >MacOS folder>Final Cut Express with the render folders along side of it!
    Anyway, I can easily move them out of there to the appropriate folders and then reconnect the media. I will take your advice after exporting the episode into the needed formats and leave the rendered files behind when passing it over to awaiting hands (it will greatly lighten the data load!).
    Your advice is to gather the important files and folders which have the underlying media (e.g. scans, sound effects, and narration) and the instructional FCE Project File. Thank you for bringing me back to task! And if you want that snapshot of this bizarre event, I'll send it! Totally baffling...

  • Why are my exported files not going to me email?  I have used 3 different ones.

    Why are my exported files not going to my email (receipts & business card)?  I have used 3 different ones...2 yahoo and 1 hotmail.  I have checked spam box also.

    For the Receipts app I chose to export the info as a PDF file..an email was requested..I entered info and clicked send.  For the Business Card app I chose Send, not Print..an email was requested..I entered info and clicked send.  I haven't received anything, not even in my spam folder.

  • Why are ACR PSD files 10-20 percent larger than the same file resaved in PSD?

    Why are ACR > PSD files 10-20 percent larger than the same file resaved in PSD? I posted this many years ago and never found an answer. Now that my drives fill up quicker, I thought I might chase this question a little bit further.
    Same .CR2 saved within ACR either with cmd-R or open ACR within PSD, the saved file is 34.5mb. Resave that same file (no edits) within PSD either with or without Max-compatible and the file is now 30.7mb. Another file that is 24.5 becomes 19.5MB.
    Why the difference? Is ACR and PSD actually using different compression strategies?
    thanks.
    Mac 10.8.5 / CC / ACR 8.4.1 - but this has been a consistent behavior over many years and versions, CS6 / CC.
    Same .CR2 saved within ACR either with cmd-R or open ACR within PSD, the saved file is 34.5mb. Resave that same file (no edits) within PSD either with or without Max-compatible and the file is now 30.7mb. Another file that is 24.5 becomes 19.5MB.

    Hi Jeff
    If it is RLE it's not as efficient as LZW:
    Saved ACR>PSD = 40.1MB  (sample image this AM)
    opened in PS and resaved as PSD = 30.8MB
    resaved as TIF without LZW = 40.1MB    (this adds to your thought that the ACR>PSD doesn't us any compression)
    resaved as TIF/LZW = 9.6MB
    Jeff Schewe wrote:
    I really think your priorities are a bit off. 10-20% is meaningless...you just need to get bigger....  and quit fussing over a few GB's here or there...
    ???   I hope that the Adobe engineers are fussing over 10-20% efficiencies.
    I'm within arms reach to a rack of 40TB of drives (doesn't include off-site drives), and all 2TB drives are being recycled to 4TB drives, as a result the rack is always growing. Actually the ACR>PSD files don't really make a difference in our long term storage, only for the nightly backups. But anyway, how you save, what you save etc. should all be part of the discussion.
    .... so in my case, throw in an excess MB here and there and all of a sudden you are talking TB's. Plus advantages in backup times, drive life, and energy use.
    Somebody added compression into the PS>PSD format, but it wasn't included in the ACR>PSD format, was it a decision or an oversight? If it's just a matter of making ACR compatible with PS when saving the same PSD format..... then why not?
    regards,
    j

  • What are the "other" files on the hard drive and how can I reduce them

    Advice please - what are the "other" files on my hard drive and can I reduce or clear them  - currently taking up over 90 gig of disk space

    WZZZ wrote:
    "Other" than what?
    In About This Mac > Storage -
    ...the yellow stuff.
    I believe "Other" is primarily System and System-related files.

  • Why are my ".pdf" files not opening in Creative Cloud? The tumbril shows up as a blank page!

    I just switched over from Adobe Acrobat Cloud to Creative Cloud; a tedious task. Most of my files open up fine, but some of them show up as a blank page thumb nail. They do have ".pdf" extension. Any ideas as to why this is happening, and what I can do to correct the issue?
    Ty

    @masood131 - A few questions:
    Are the pdf files without a thumbnail password protected? (Probably not but just checking since we will not be able to provide a preview for such a file).
    If you click on the blank thumbnail to view the individual file page do you see a larger preview image, or is that blank too?
    If you refresh the browser page does the thumbnail image show?
    If you upload the file a second time do you see a thumbnail image?
    If there is a problem with a specific file feel free to share a link with me via a private message and I can investigate further.

  • Why are all jar files not compressed in the JRE installer?

    I used 7zip to unpack jre-6u12-windows-i586-p.exe (Oracle JRE Installer). On unpacking, I got a core.zip, a zipper.exe and a few other files.
    Again on exploding core.zip I found a few things. core.zip contains all the jar files just like it would be after installation except for 7 jar files.
    charsets.jar
    deploy.jar
    javaws.jar
    jsse.jar
    localedata.jar
    plugin.jar
    rt.jar
    Instead of these jar files there exists the corresponding packfiles
    charsets.pack
    deploy.pack
    javaws.pack
    jsse.pack
    localedata.pack
    plugin.pack
    rt.pack
    I think these are files created by pack200.exe & unpack200.exe is run on them after installation to create the corresponding jar files.
    So now I have a few questions
    Why are only these 7 files run through pack200.exe. I assume its because they are bigger than other files. But it wouldn't take that much effort to pack all jar files & unpack them after installation.
    The .pack extension suggests that these are packed but not gzipped. Again why would Oracle not do a gzip also? for eg with rt.jar packing reduces size from 45 MB to 12 MB, while adding gzip also reduces it to 6 MB.
    Edited by: 966944 on Oct 22, 2012 8:19 AM

    Whatever the truth of all this may be, you won't find it here. This is a user to user forum, not Oracle support or a channel to the developers. All you will get here at best is valid post hoc reasoning: at worst, guesswork. And if you're trying to bring this issue to Oracle's attention, again this isn't the place to do it. Locking the thread.

  • Why are GarageBand .aif files in trash after session

    Hello,
    After doing several hours of recording in GarageBand 10.0.2, saving take,1, 2, 3, all different for reference later I close.
    In the TRASH there are this
    Why are they deleted to the trash and is it ok to EMPTY with out effecting the song?
    Thanks
    jojoguitar_always learning

    You're right!!
    I looked for an answer and I found it on Microsoft's site:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/i-keep-getti ng-an-empty-file-in-trash-at-startup/e5760e59-9e5f-4a0a-8766-dac6a73af148
    1. Open application Office error reporting, the application is located in this folder
          /Library/Application Support/Microsoft/MERP2.0
    2. Go in preferences
    3. Uncheck enable office error reporting
    That did it... Thank you!

  • Why are my desktop files not showing on the desktop

    Why are the files in my desktop folder not showing on my desktop?

    An add-on can put its icon on the bar automatically if it likes, but some add-ons do one of the following:
    * Add an item to the Tools menu
    * Add an item to the right-click menu (depending on the context)
    * Put a button in the button palette so you can add it to a toolbar if you like (''to call up the button palette, use'' View > Toolbars > Customize ''or right-click a blank area after the address box on the Navigation Toolbar and choose Customize from the pop-up menu'')
    Also, you might want to double-check that the add-on is enabled.
    Tools > Add-ons > Extensions
    If you have the orange Firefox button, it's Firefox > Add-ons > Extensions
    Does that help? (If you have problems with a particular extension, you could mention which one it is for more specific comments.)

  • Why Are My Cache Files & Other "Hidden" Files/Folders Visible? & How Do I Get Rid Of Them?

    I hid mach_kernel and private, but the cache.db, cache.db-shm, cache.db-wal of both the system and user folder are, also, visible. Yesterday, I had to restore from a Time Machine backup because something had suddenly eaten all the space on my startup drive. However, these files were visible prior to the restore. So, why are they there and how do I safely dispose of them or hide them to prevent their return to visibility? Thanks.

    Applications/Utilities/Terminal command.
    defaults write com.apple.finder AppleShowAllFiles FALSE &ampo; killall Finder 

  • Where are my render files saved?

    I have 4 Hard drives in my mac pro.  All but the fourth is pretty full and one is my OS and apps.  I started a new project on the 4th hard drive.  My render files will also be saved on this 4th hard drive.  Is that correct?  If not where do I change the render file destination?  For some reason I was working on this new project on the 4th hard drive and I got a message indicating that I was running out of room on my 3rd hard drive.  I was a bit confused by this since this new project was started on the 4th hard drive.  Another question is can I delete my old render files from a project but the project still remains entact?  It would just have to be rerendered, correct?  Thanks for any help you can give.  you guys always seem to enlighten my amateur knowlege.
    Scott

    The 3rd dive will get down to mb's left.  I deleted some render files from old projects on the 3rd hard drive so I am back up to 10 gb's.  I am not trying to use the 3rd hard drive any more unless I have to access an old aperture library.  When I go to the render files of a project, there are 3 files (high quality media, Peaks Data and thumbnail media).  Can I delete all these render files without deleting the project or the contents of the project?  Thanks again.  You have always been a big help.

  • Why are unwanted vi files produced when building executable?

    I'm using LabVIEW 9, and when I build an executable, it creates 3 unwanted folders containing a number of .vi files that I don't want to have.  The 3 unwanted folders that are automatically created are:
    NI_HTML, NI_report, and NI_Standard Report
    Why are these folders with numerous .vi files created automatically, and where is the option to exclude these when building the .exe?  Ok thanks
    Solved!
    Go to Solution.

    I assume this is a executable build description is created in LabVIEW 8.6 (or earlier), look in your LabVIEW 2009 build settings, there should be an option 'Use LabVIEW 8.x build layout'  (or something similar), this is probably checked, please uncheck.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Why are my log files not getting backed up?

    I just tried to get some files from ~/Library/Logs but found that the entire Logs directory was not on Time Machine - looks like every thing else in ~/Library was there. I checked the exclusion list and it was not on there.
    I know that some ~/Library stuff gets backed up because I was recently able to find and restore some iCal events from about 4 months ago.
    Anybody know what gives? Is there any way to change this?
    Thx

    frankinmelrose wrote:
    I checked and both /Library/Logs and ~/Library/Logs are on the exclusion list - now why doesn't Apple's help file discuss that?
    Now, that's funny! Apple's Help, while improved over the last few releases, is nowhere near complete. That's why some occasional tips turned into my 120+ page website, mostly about Time Machine, and several others have written entire books about OSX.
    By all means, tell them about it at: http://www.apple.com/feedback/timemachine.html
    Maybe if enough of us do that, they'll reconsider.
    My problem - as a software tester, I occasionally would like to ensure that logs for a particular app stay around during my test period - in this case, the app under test did an archive, but kept only the previous 5 logs as backups (and without a setting I had access to) - and, of course, I was looking for an earlier log.
    So, is there any way to tell Time Machine at the start of my testing period to save logs in specific ~/Librarary/Log subdirectory and then at the end of my testing period, tell TIme Machine to stop backing them up?
    Not directly, other than periodically copying them somewhere else. But the schedule and handling of the "rotation" of some can be altered, if you're comfortable with UNIX and Terminal. See the MAN pages for newsyslog and newsyslog.conf.

  • Why are certain sound files not playing correctly in iTunes?

    I have had iTunes for years and have never had prolonged or unsolvable problems with anything playback related until now. I recently acquired some music, and it plays perfectly when I use WMP. When I added it my iTunes library, however, the audio is compressed during playback and there is a lot of skipping and blips going on in every song. It still plays perfectly in WMP, but not matter what I do the same thing happens in iTunes.
    For reference, here is what the original audio songs like
    http://picosong.com/cNPn
    And here is what it sounds like in iTunes
    http://picosong.com/cNPe

    I have a similar problem. When I try to play TV episodes that were downloaded (in .m4v format) using iTunes, QuickTime (7.0.4) will play video without audio, and when I press "stop", QuickTime locks up!
    My system used to play these files PERFECTLY, until I downloaded some shareware video format conversion programs (that didn't work, anyway). I believe one of them installed a shared DLL or CODEC or something that is conflicting with QuickTime. I'VE UNINSTALLED AND REINSTALLED QUICKTIME AND ITUNES COUNTLESS TIMES, trying to follow different people's advice, mostly from posts on this site, but nothing helps!!
    The thing we have in common is that it sounds like you also have other video software that could have conflicting CODECs or shared DLLs. DOES ANYBODY KNOW HOW TO TRACK THIS PROBLEM DOWN??
    And why doesn't Apple make a CLEAN uninstaller and a COMPLETE installer? People shouldn't have to do the manual registry editing and file deletions that other people are recommending!!!!!
    Intel 915 Mo Bd. 3.2GHz 1G RAM   Windows XP  

  • Why are my received file attachments (Office files such as .doc, .docx, .xlsx but also pdf files) corrupted - so that I cannot open them?

    For the last month, 90% of the file attachments that I receive by email will not open on my MacBook Pro (2009, running Mac OS 10.7.5). I get assorted messages, but generally saying that the file is corrupt, or the filename contains unacceptable characters. The problem has been generally with Word files (.doc and .docx)], Excel files (.xls and .xlsx) and pdf files.
    The bit that I don't understand is that I can open the same email attachments (without any problem) when downloaded on my iMac. And I have recently found that colleagues who received the same emails can open them, and can transfer the files to me (usually by USB stick) … and then I can open them. But I still cannot open the same files received as email attachments on my MacBook Pro.
    Which makes me think that the files (email attachments) are somehow being corrupted as they are downloaded?
    I installed the Mac OS X Update Combined 10.7.5 in July, so perhaps this was when the problem started? And, although it may be unrelated, around the same time as this problem started, I transferred some files from a colleague's computer on a USB stick and found that the USB stick had picked up a virus/malware, which meant that the stick was dead, and I had to reformat the stick. I scanned my computer (using ClamXav, with the latest updates) and quarantined a file found on the USB stick and on my computer.
    Any thoughts on why this might happen, and what I can do to sort it out (as it is making work very difficult - I travel a lot, and rely on being able to open and read files sent from countries all over the world, often by people using old versions of Office software)? I have never had problems in the past, and can't understand why my other computer, and my colleagues, can all open these files, but my laptop will not! Many thanks for any help!    

    I opened one of the PDF files in notepad and these are the first couple lines:
    瀖ᕁމጿ␠씴豈䧉筩롈ꓳ劏ꎯ僪뚢頟뻏즏谀㿃夑퀉꟠鲲쮂⫉笿褡밤籞冁탁ӓ轸뿐笼ⵆ횰䄌ඁ淥ة寨闤⬅鳦팥링빨嬄敎უ婏㣴ً鮓ࣿꢚ㑀녲莒඼ိȆ䕇纍쉉籶뺝갞伐쮠᥏﯒넉釖ȓ겴☧ ἣ秵駻�䣞띰㖔流羀籔朼敨ꢉ糶당⬤俉膇䄐惡�ಹꛖ鍡恡ⱶᶜ�堷﹑ﱌ僿걄뎔æ䋷귪⛢⫐䅪䉙὿烶ꖆ႟ᗔ瘞狻틫儩六잶覱낵듘盋崾�ᦜ㺆௹뻹燴ឋ騙쬄ꏿ뽒煹�钼뇲腎稦ꃲ㈃沒ꔈ뺐뛽첑䘶畱䍣紻 ⁜哠鳾

Maybe you are looking for