Why are my slugs NTSC ???

Hi,
Working on a PAL project, PAL timeline, PAL presets, PAL everything.
But if I make a slug from the viewer, it shows up as using NTSC DV Compressor, NTSC 720x480 Frame Size, and Lower (Even) Dominance. The frame rate of the slug however is at 25fps.
Any suggestions?
(I always knew slugs were a bit strange....)
thank you....

I just tried this out and you are correct in your observation. However, I have a couple additional observations -
Though the slug placed into the PAL sequence still says it is Compressor:DV-NTSC, and the frame size is listed as 720x480, it
-appears to still be native to the sequence settings according to the render status bar
-fills the frame
-does not require rendering
-shows a PAL frame size if I drag it from the timeline to the browser and appple-9 it from there.
it has been many versions of FCP since bars or slug have required rendering, and the single generator comes into a sequence as native regardless of the sequence settings. Also consider the way that the bars or slug generators fill the viewer window no matter what the frame size, and cannot be zoomed in and out in the viewer.
I believe the slug and bars have somehow been made scalable and universal to all sequence codecs, and that even though the frame size and compressor for the default slug might show up as NTSC even in a PAL project, they are still native to the PAL sequence, and you should not notice any problems or require additional rendering. It seems as if these generators allow FCP to repeat a single frame as video without rendering, which I believe has been the case since FCP 4.0. If it fills the frame, and you don't have to render it, shrug your shoulders, roll your eyes, and keep working.
hope this helps -

Similar Messages

In Pages 5, why are page thumbnails different sizes?

So I'm using 5. And I must say I think it's brilliantly done after a long period of ******** about it. I guess I'm not asking of it anything it doesn't provide and what it does it does very well - though I'm puzzled by the behavior of selecting text via the keyboard.
Anyhow, that's not my question. I'm working with a long text document. I notice that as I work the page thumbnails become different sizes. It's subtle but it's clearly intentional. I reckon it's trying to tell me something but I don't know what. Haven't been able to find any info in the manual and was wondering if any of you clever people here might know. Thanks.

This is what I meant about how rude you are though. Your answer DOESN'T EXPLAIN ANY OF THE BEHAVIOUR myself or the other person were reporting. The only assumption that I can make is that you posted here for the sole purpose of implying that we are both mistaken or stupid.
How is this helpful at all?
How do you have 32,485 points when you are obviously more concerned with insulting people than helping them out? It puts the lie to the whole idea of "Apple Support Communities."
Also, I specifically informed you that your comments were insulting and unhelpful and politely requested you not post on this thread anymore or at least until you had some kind of actual information, yet here you are. Posting again, with no content other than the implied insult.
I'm not stupid. I know what a section break is, I know what a page break is. I'm a writer who has used innumerable word processing programs over the years and have been an IT worker for 10 years now.
I have a Pages document. It has no (or only one depending on your point of view), section(s). It has page breaks only. The pagination is set to start at "1" on the first page and proceed normally to the end of the document (300 or so pages). I am using Pages 5.5.2 on a brand new iMac. I have NONE of the previous or older versions/types of Pages on my computer.
The pages thumbnails on the side, do actually CHANGE SIZE randomly as I am editing the document. These differing sizes are NOT CORRELATED WITH THE BEGINNING OR ENDING OF SECTIONS. These size changes are also NOT CORRELATED WITH THE PAGE BREAKS (in case you were about to argue the similarity of page breaks and section breaks). As I work through the document and scroll up and down editing here or there, the size of the thumbnails RANDOMLY CHANGE SIZE. Sometimes this is correlated with me working on a section, sometimes I can work on a section and no change happens at all. The thumbnails that change size often change back again when I scroll back to them later on.
So please ... Try to act like a decent human being and either help out, or go away. STOP POSTING THAT WE ARE WRONG, when you DON'T in fact know we are wrong. STOP INSULTING ME by assuming I am stupid.
Why are you even here if you don't want to actually HELP anyone?
To anyone else reading this: I am having a real bad time with this fellow who is just the most insulting person I have met for a while, however many of my posts about him are being deleted. If anyone knows (including the mods of this forum) of the proper way to REPORT or get rid of a troll/abuser like him on Apple Support Communities or a place to report his behaviour, please let me know.

Why are my current calls being interrupted by new calls?

Why are my current calls being interrupted by new calls?
I'm using iPhone 6 plus and reset my network settings multiple times. The issue is random.

glic1 wrote:
Why are my current calls being interrupted by new calls?
I'm using iPhone 6 plus and reset my network settings multiple times. The issue is random.
Are you saying when your on a phone call and someone else calls you it does what exactly? Disconnect your current call with the new call?

I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS

I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS. When I look in the library under the get info screen it says they are in the folder itunes music, under the c: drive but when I actually go to that folder to look for them they are not there....HELP!

Hello RumDog,
I think this article will help you find the media in your library.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Discovering and changing the iTunes Media folder location
Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
From: Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Cheers,
Sterling

HT204053 why are not all my songs I have purchased in the itunes store and are on my computer not on my phone?

why are not all my songs I have purchased in the itunes store and are on my computer not on my phone? Very frustrating I purchaed almosta $100 worth of songs for a trip and they are not on my phone after continuious syncs. Do I have to pay for itunes match for this?

Welcome to the Apple Community.
Have you actually selected them to be synced to your device from the iTunes sync settings.

Why are some of the loops in GB 'greyed

Why are some of the loops in GB 'greyed out' " I'm specifically interested in 'slide guitar' for example and cant find a reason why there's no access. My iMAC was bought in April 2010??

Court Kizer wrote:
Would you please stop spamming every single apple garageband discussion forum with your website. It doesn't have the answers on how to force the loops to download.
You're using the forums to spam your site in almost every single thread, and wasting users time.
Have to disagree with you there, Court Kizer. The Bullets&Bones site is, in many ways, where I really learned how to use GarageBand.
Take a look at the list in the Top Users box on the right. Those points are awarded by people who got their answers from the advice posted.

Why are animated gifs not displaying animations in the preview?

Why are animated gifs not displaying animations in the preview?
My coworkers and I are not seeing a animation in the preview pane in Adobe Bridge CS6 even when clicking the play button in the preview window. However, we do see a graphic of the first frame and one person sees 1 frame when clicking play and one other frame and then the animation stops, however, that is not the complete animation.
I'm using Windows 7 32 bit
My coworkers are using a mac.
One coworker has apple OS Mountain Lion with a Intel Quad-Core Xeon – 64 bit system.
Is this fixable or in the works as a patch? Otherwise we have to open these docs in a browser in order to view them properly.

I've just come to the realization that some animated gifs do play fine and others do not. A coworker of mine suggests that if it's an animation made via Adobe Photoshop, it'll work in bridge but will not if it's made using something else.

Why are my iTunes and iPhoto crashing every time I try to open them?

Why are my iphoto and itunes crashing every time I open them? This is a new problem on my Mac Mini. Have the latest software on my Mac Mini and the latest iLife sotware. My mac mini is about 5 years old, always kept up to date.
Processor 2 GHz Intel Core 2 Duo
Memory 2 GB 667 MHz DDR2 SDRAM
Graphics Intel GMA 950 64 MB
Software Mac OS X Lion 10.7.3 (11D50b)

Hello Majorie,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Also, how much Free Space is on your Hard Drive?
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.

Disc Burner. Why are some files not readable or writeable?

Hello,
I am trying to backup my friends computer files on a beige G3 (233 MHz). I am burning about 6 DVDs of AIF music files. Most of the files are about 30 - 40 Megs in size. Often I receive error messages on particular files that read:
"The operation cannot be completed because some data cannot be read or written.
(Error code - 36)"
Followed by the choices: "Stop" or "Continue".
I have a bad feeling that my startup disk is too small but I am not sure.
Most of the files work fine. However some of the files cause disc burner to not be able to use them in the disc image before I burn. Why would this be?
Here are the specifications:
Computer: beige G3 with two hard drives (one SCSI and one ATA hard drive) and a Pioneer DVR-110D DVD writer which is Apple supported (Apple system profiler indicates Apple supported on this DVD writer). My blank DVD disks are Sony Vermatim DVD-R (1 - 16x speed support). Although I think my beige G3 only writes them at about 2 or 4x.
I am using OS 10.1.5. My startup disk which has OS 10.1.5 in it is a 4 GIG SCSI disk. Is this big enough for a startup disk (for creating 4.5 GIG DVDs)? My files are on the second hard drive which is a 40 GIG ATA disk.
I have a bad feeling that my OSX startup drive is too small for disk burning - it is only 4 GIGs in total and OSX Disc burner (Disc copy) is first making a disk image on my startup volume before it burns it. Perhaps that disk image is too large for the startup volume. Is there any way I could ask OSX to put this disk image on the second larger hard drive instead (not the startup drive?).
Here is my process (I hope I am doing this right - I am new at this):
1. I first insert a blank DVD-R
2. A message pops up asking my if I would like to create a blank disc image for this disk (I think this is the typical Disk Copy utility window. I say "yes" and give it a name and choose the "DVD-R or DVD-RAM" option. (I am not sure if there are other important settings to choose here or better settings to use but I guessed the other options that seemed obvious. A blank disk image is created with an icon that looks like a DVD disk.
3. Then I drag my chosen files to this blank disc image. It takes about 30 minutes to copy over. Thats when I receive the error message that some files couldn't be "read or written". The other files work fine but it would be nice if they all worked.
Why would some files not be readable or writeable?
4. Then I choose file/burn in the top menu and the DVD is created. This takes another 20 - 30 minutes. At the very end of the process another message pops up saying:
"Sorry the operation could not be completed because an unexpected error occured (error code -28)" Followed by an "OK" button.
However all the files that made it onto the final DVD are fine - its just that its not all of the ones I originally chose in the first step when dragging to create the disk image.
Am I doing this the right way?
Why are some files not "readable or writeable" as it indicates in the error message?
Is my 4 GIG startup disk too small for this? or are the music files possibly corrupt? or could there be some other possible problem?
Thanks

To follow up, I have some good news. After following your advice Kappy, it now works very well Thanks! Instead of using the 4 GIG volume for the OS, I am now using an 8 GIG partition on an 80 GIG drive. So now the OS has some room to operate. No disk errors occured on my first DVD
Now there was one problem. The second DVD burned gave me an error. I am not sure why but I am going to guess that because I had to installed the OS onto an 8 GIG partition maybe the OS needs to be rebooted in between disk burns because although 8 GIGs is certainly greater than the 4 GIGs I gave it last time, it still isn't a lot of space - maybe just enough to do one DVD at a time. Thats only a guess. So I rebooted to see if that clears the system out ready for the next DVD and I am trying to burn the second DVD again. If I remember I will report back. In any case, yes, this seems to be working. I hope this second DVD burns well too.
Thanks Kappy

Why are both SQL_ID and PREV_SQL_ID null?

session A is blocking session B.
it was row-level lock.
But, why are both SQL_ID and PREV_SQL_ID null in session A?

Well, what do we know?
Session A must have an uncommitted transaction.
That uncommitted transaction is blocking session B.
But session A could well be doing nothing now, could be churning away doing some sort of processing outside of the database (java client you said), might well be off doing something elsewhere in a distributed transaction.
Who knows?
Not necessarily the database.
If you have ASH licensed, you might, might get a better picture of what session A was doing by looking at DBA_HIST_ACTIVE_SESS_HISTORY but as this is sampled data and your statements might fly in and out, it might not be helpful.
Note that even if prev_sql_id or sql_id were populated, these might not be the statements responsible for the lock.

I do not have many messages but my iphone 5s says messages take up 4.6GB of space. When comparing with friends who have many more message, less than 1 GB is being used on their phones. Why are mine taking up so much space and how do I correct that?

I do not have that many messages on my new iPhone 5s (maybe about 15 conversations and only one or two going back a little ways) yet when I go to Settings, Usage it shows that my messages are taking up 4.6GB of space. When comparing with others (some who have hundeds of messages) they are using under 1GB for their messages. Why are mine taking up so much space??

I found a post with this solution that worked for me - .Do a backup, then download ibackupbot. It lets you look into the contents of that backup. Look in system files>mediadomain>library>sms>attachments. I found a ton of huge files related to long deleted texts. ibackupbot let me delete all that old crap. I then restored the phone with that now modifec backup and Bingo! freed up 9 GB. No problems.
But note, if you are not technically inclined you probaly don't want to be digging around and deleting back up files. You delete the wrong thing and you could jack up your phone badly. Be careful.

I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first

I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first phone?

it's meant to work like that
so if you receive a message on your iphone you also get it on your ipad or ipod touch
to avoid it use separate appleID for each device
or turn off imessage on 1 or both devices in their settings
but that will not fix the issue that 2 devices using the same appleID will never be able to facetime eachother
the appleID is a unique handle for 1 user only

Why are there so many more choices on the USA iTunes Store? Surely having an iTunes account should let you access all itunes availability the world over? Also how do you request films/tv series to the UK itunes?

Why are there so many more choices on the USA iTunes Store? Surely having an iTunes account should let you access all itunes availability the world over?
Also how do you request films/tv series to the UK itunes? There's tv series I'd like but they're incomplete like The Batman & Xena Warrior Princess. And films theta aren't available for download but you can purchase in a store like HMV? Apple isn't doing itself any favours by secluding countries by their store. They'd make billions if you could just select the iTunes Store you want to search & purchase from just by signing in! If anything what they're doing is putting themselves into a corner, other companies like Samsung & HTC are already on too of them for innovation & ease of use. The people they're attracting are predominantly existing Apple users not new customers. What do you guys think?

It's not Apple's choice, they can only sell a particular item where the content provider/rights-holder has granted them a license to sell them. Content is licensed by the rights-holders to Apple on a country-by-country basis, each country therefore has to have its own store, and you have to be in a country to use its store - they want control over where their content is available.
You can try requesting that an item be added to the UK store via this page, but unless the rights-holder agrees to then Apple won't be able to sell it here : http://www.apple.com/feedback/itunes.html

How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something if i use firefo

How can I disable the automatic hiding of known file attachments, and why are always about 10 internet pages where I have to download something when I use mozila firefox?
Windows Computer

1) If you are talking about the file names on the computer, there is a
setting to turn off known file types. Open your file browser. Then
just under the location bar, press '''Tools,''' then '''Folder Options.'''
A new window will open. Select '''View.''' Look for
'''Hide Extensions For Known File Types.'''
2) Never NEVER '''NEVER''' download anything unless you know what
it is. If a web site claims it needs to download something, what is it?
It could be something like the flash player, '''or a virus ! !'''
Ask questions, or go somewhere else.

Why are Apps taking up space on my Mac in iTunes when I have iCloud?

The Apps in iTunes on my Mac take up a lot of disk space. Why are they there at all? I use iCloud to backup my iPhone and iPad. iTunes Store keeps my purchase history. So, why are the Apps taking up space on my computer?

About iCloud
http://www.apple.com/icloud/
iCloud Backup and Restore Overview
http://support.apple.com/kb/HT4859?viewlocale=en_US

Why are my slugs NTSC ???

Similar Messages

Maybe you are looking for