Why are my still images Blurry when applying effects?

I am creating a slideshow video using images with up to 18mp.  The images look wonderful clear and sharp until I try and add video effects to the slide, like zooming in or panning. 
I am a user of both CS5.5 at work and newly acquired CS6 for home.  I like what I have been able to do, however this makes me very frustrated when everything looks good except for the images with effects.  Should I be applying effects differently?  or what?
Thanks,
G

>Didn't mean to start an argument
= Little Devil with a Grin !!!
Stick around for awhile... there is OFTEN a good deal of "healthy discussion" (ie-disagreement) that goes on here
That discussion brings out a LOT of different experiences (you say X doesn't work... but it works just fine for "me") that sometimes, maybe even often, leads to increased and/or new knowledge for everyone
Other times, you just need to realize that what works for "me" may, or may not, work for "you" exactly the same way based on your work flow
Read what everyone offers, try what you can... and make LOTS of notes so, over time, you will develop work practices that work best for you
Personal example...
Many people export out of PPro as MPEG2-DVD to then use Encore to author a DVD
My PERSONAL work flow is to export my AVCHD edits to Widescreen DV AVI to give to Encore... so I may use Encore's Automatic Transcoding setting to make a "best" fit of video length to size (single or dual layer) of DVD
This is because I just don't care to get into all the details of figuring out the PPro settings when exporting... I let Encore do all the math for me
That process works just fine for me... other people want to figure out their own math for the PPro export settings
I say what I do, and why, but I certainly do not TELL anyone else that they MUST do it my way

Similar Messages

  • Why are some jpg images scrambled when they appear in my screen saver?   The same images look fine in Preview and Finder.  Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

    Why are some jpg images scrambled when they appear in my screen saver?   The same images look fine in Preview and Finder.  Some images appear scrambled in the screen saver 'preview' window and the actual screen saver. Other jpg images look fine.

    The desktop image is fine, taken from the exact same pool of jpg photos.  However, as soon as the slide show screen saver comes on, the images are scrambled.  What is it about the apple screen saver algorithm that scrambles the pics?

  • Why is a still image fuzzy when being played but clear when I pause it?

    I'm trying to make a video out of a collection of still images.  It is a tribute video, essentially, and I am trying to liven it up by panning and zooming documentary-style.  I've imported all the images I want to use into my media folder, and added them to my timeline.  When I hit 'play,' the images suddenly become blurry, but when i then 'pause' it, they return to being clear.  Any idea why this might be happening and what I can do to fix this?
    Thanks very much,
    Brian

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Elements FAQ http://forums.adobe.com/thread/1042180
    >make a video out of a collection of still images
    What is your project setting, and what size are your pictures?
    Pictures that are "overly" large may cause video editing problems
    Photo Scaling for Video http://forums.adobe.com/thread/450798
    -HiRes Pictures to DVD http://forums.adobe.com/thread/1187937?tstart=0
    The Tutorial Links Page http://forums.adobe.com/thread/1275830 may also help
    Plus...
    Premiere Elements FAQ List (2 pages of FAQ as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_faq?view=all
    Premiere Elements TIPS List (6 pages of Tips as of September 2013) http://forums.adobe.com/community/premiere_elements/premiere_elements_tips?view=all

  • Why are my (still) photos pixellated when I make a slideshow in iDVD?

    I have made a slideshow of (jpeg) photographic images to play on a DVD (via a TV set). However, they now seem to be playing as pixellated photos, both on my laptop and on the tv screen... it seems to have degraded the images

    ink...
    DVD are presently low resolution devices - NTSC is less than 640x490 pixels and your PAL discs are less than 768x576 pixels - probably 8 to 10 times lower resolution than your original digital images.
    See Preparing images for DVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/6.0/en/17.html for suggestions on the still image resolution to use.
    By the way, did you bring the images directly into iDVD or were they exported from iPhoto?

  • Colour background images changes when applying effect

    Hey,
    I created a page, with a large background image in the back. When applying an effect (like shadow, or transparency) to text above, the colour of the image below changes, it becomes less saturated. This persist even when exporting and viewing in Acrobat Reader.
    Im using InDesign CS3 with Windows XP SP2
    Greets!

    Try changing your transparency blend space to RGB.
    Bob

  • Why are these placed images blurry??

    I created an image in Photoshop that has: resolution 72 pix/in, 600 px by 800 px (about the average screen size of ereaders)
    This is what the image looks like on Photoshop at 100% zoom: http://i.imgur.com/0dNU2lU.png
    When I Place the jpg image in Indesign, it looks blurry and pixelated: like this
    I looked on other similar threads from google, but it seems those people hadn't been using the correct resolution of 72 dpi. But my images in Photoshop ARE at 72 dpi. Is there anything else you would recommend to do? I would really appreciate any help!
    Also, if it helps:
    I'm working on an epub document with these settings: screenshot
    This is what the frame fitting options window looks like when I select the image on Indesign: http://i.imgur.com/WqRxAaS.png

    First off, for text like that youreally should just build the page in ID.
    But to get the best preview, and that's what it it is, a preview, not the acutal pixels as you see in an editor like photoshop, use View > Display Performance > High Quality Display.

  • Why are my duotone images turning black and white when put in indesign?

    why are my duotone images turning black and white when put in indesign?
    I have been playing duo and montotone images into indesing with no trouble. Then all of a sudden as I placew them they go black and whitre. I have tried everything from re saving, re making in photoshop and differant colours et5c. But nothing seems to wrok. The images already in my document arew fine it is just new ones. If someone could help that would be great

    Can you start a new document and then load one of the duotones known to be good in the working file and have it correct? If so, try one of the duotones known to be bad in the working document in the new file. Does it work?
    If no to either suggestion, can you share one of the images known to be good and one known to be bad? ZIP 'em up and upload to dropbox and plop a link here. Or, to keep the file sizes down, you can quickly make a new set and provide those.
    As well, the ID version and OS info would probably be helpful.
    Take care, Mike

  • Why are my scanned images turning red when put in a slideshow or iMovie?

    Why are my photos turning red when put in a slideshow?

    Can you start a new document and then load one of the duotones known to be good in the working file and have it correct? If so, try one of the duotones known to be bad in the working document in the new file. Does it work?
    If no to either suggestion, can you share one of the images known to be good and one known to be bad? ZIP 'em up and upload to dropbox and plop a link here. Or, to keep the file sizes down, you can quickly make a new set and provide those.
    As well, the ID version and OS info would probably be helpful.
    Take care, Mike

  • Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller?

    Why are my Illustrator images getting thicker strokes when I take the bounding box and make them smaller? This has never happened to me. I'm not an expert at Illustrator, but I do know some fundamentals.

    Thank you for responding so quickly. No apologies necessary - I know this Forum isn't McDonalds - don't expect an answer to be served up right away. You helped me out with a big issue yesterday.
    I am using a mac - OSX 10.7.5
    I have Adobe Creative Suites - CS5 - Illustrator version is 15.0.2
    The contents I am placing are all  Vector - Illustrator files
    But, I wonder about some of the vector files I work with.  Could a "line weight/thickness" be 'assigned' to the drawing and screw things up? I used 'simple' linear (line) drawings from SolidWorks that have been converted to ai files. It's just weird because I checked the stroke of the drawing and it's not out of line.
    I am attaching part of some box labels. You can see how the drawings, of the products, on the 'left side' are "thick" after embedding them. I think the "Global Logo" was pasted into a template not linked that's why it's okay. But look at the Quiet Thunder logo - it looks terrible. These labels are only 2.25" X 6.5", so its important I keep the images lightweight. 
    Your help is very much appreciated. Thank you!

  • Why do my still pictures blur when they are enlarged or moved across the screen

    Final Cut Express
    Why do my still pictures blur when they are enlarged or moved across the screen?

    If they look ok in pause they should be fine.
    The computer may not be quite keeping up in playback.
    Al

  • Why are you still selling iphone 4 when it dont work in your hand tryed a rubber sleeve and still no signal in my hand.

    why are you still selling iphone 4 when it dont work in your hand tryed a rubber sleeve and still no signal in my hand.i think they should all be called back or given the iphone 5 free in its place.

    http://www.heise.de/mac-and-i/kolumnen/artikel/Die-geheimnisvolle-iPhone-Energie -1226682.html?view=zoom;zoom=1
    Step 1: take an empty glass, put the iphone into the glass as shown in the picture.
    Step 2: stare in disbelief about this BS really helping 

  • Still images blurry in slideshow

    still images blurry in slideshow
    What resolution and if I need to do anythig with digitalstill images files?

    Use an image editing program like Photoshop to resize the images to the correct resolution
    and pixel aspect ratio (PAR) of your DVD before importing them into PPro. PPro does not resize images very well.
    You will also find links to many
    free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Why is my raw image cropped when I reopen it?

    why is my raw image cropped when I reopen it?

    When you edit a RAW file, any changes you made are stored in a Sidecar file with the same file name, but with a .xmp extension.  If you find and delete that sidecar file, then the RAW file will open uncropped.  But, you only have to select the Crop tool in ACR, and the crop window with handles will appear, so you can change the crop.   Or having sellected the crop tool in ACR, the escape key wil cause your image to revert to full size.

  • Why does a grouped image disappear when I ungroup it?

    Why does a grouped image disappear when I ungroup it?

    There are bugs hanging around for version after version after version. Hopefully it gets fixed but nobody knows when or if a bug will get fixed until it is.

  • Why are my attachment images being embedded as distorted thumbnails in the body of the text in Mac Mail?

    Why are my attachment images being embedded as distorted thumbnails in the body of the text in Mac Mail? How can I attach image files as normal attachments?

    Attachments – Disable Embedded Attachments

Maybe you are looking for

  • Problem with apply changes on master-detail with respect to date handling

    dear sir, i have one tabler where in i have created from_Date and to_date as varchar2(30) each. I stored the from date as 'dd-mon-yyyy hh24:mi' I had written before header process for calculating no of days between from_Date and to_Date using the sai

  • Draft / fast Printing on Dot Matrix Printer(s) from Windows

    Dear all, we need to print all documents in Draft / fast Printing on Dot Matrix Printer(s). how we can print quick draft mode. we are using SAP PL43. from where we can download draft 10cpi fonts. Regds, samapth

  • ME_PROCESS_REQ_CUST~INITIALIZE

    Hello Gurus, How should I use this (INITIALIZE) method? Can this method not be used to initialize the PReq screens with default values? My requirement is that when the user calls the ME53N transaction to create a PReq, should see some field values (l

  • Regarding initialization parameters

    Hai all, Can anybody please help me regarding this initialization parameters like 1.what is correct value (how to find) 2. indetail about each parameter 1._optimizer_mjc_enabled 2.max_dump_file_size 3.optimizer_index_caching 4.optimizer_index_cost_ad

  • Logo and bold character in message

    Hi, I am generating a popup on click of a button.  I am inserting a message by concatenating two variables as shown below.     CONCATENATE 'Material' wa_register-vbak-vbeln                 'is created on'        lv_date into lv_info. 1.When this is m