Why are my transitions displaying the wrong portion of the clip?

Hello,
I am working on a short film, and am having trouble with several of my transitions. After editing the sequence in Premiere, I performed the color grading via direct link to SpeedGrade. The Lumetri effects from Speedgrade are applied to an adjustment layer on a separate track above the original video clips. If I have problems with the transitions (all cross dissolves) in my timeline. When any of them start, they all transition to a later point in the second clip. As soon as the transition ends, it cuts to the proper point in the second clip. I hope that makes sense. If I disable the adjustment layer, everything looks fine (other than the grades are not visible, obviously). Removing the transition from the adjustment layer track eliminates the problem, but then there is an obvious cut from the previous grade to the next.
I did not notice the problem when I edited the sequence in Premiere, it was in Speedgrade that I first noticed it, and it shows up back in Premiere now.
I have no idea what could be causing this problem. I have never worked with adjustment layers before, and don't know much about them. Is there something I don't know that I should?
Cameron
Note: I am using the CC 14 versions of both programs.

I tried that: I shortened the end of the outgoing clip and lengthened the beginning of the incoming clip, so that a centered cross dissolve occupies the same space:
The problem still persists. For this particular transition, the transition shows a frozen frame from the incoming clip, instead of a portion of the video like mentioned above.
I have also tried deleting the render files for the transition; no luck. Could it be some sort of bug or glitch in the program?
Cameron

Similar Messages

  • Why is one iphone displaying the text messages of the other 2 iphones in my house?

    Why is one iphone displaying the text messages of the other 2 iphones in my house?

    That would be imessage and not text message.
    As stated by sberman, it's because the users are sharing apple id.
    On each devices - settings - message - send&receive- remove or uncheck the apple ids.

  • Why are some items on the purchased list duplicated

    Why are some items on the purchased list duplicated

    Perhaps you are repeatedly checking for available updates while downloads are in progress. This can sometimes cause more than one copy to be added to the download queue.
    tt2

  • Why are there shadows at the bottom of my screen?

    why are there shadows at the bottom of my screen and how do I get rid of them?

    take a screenshot and post it.

  • Why are a lot of the words cut in half  (horizontally) in my finder windows?

    Why are a lot of the words cut in half  (horizontally) in my finder windows?

    Your screenshot is not showing; you need to use the little camera icon in the tool bar of the reply window to navigate to the pic:

  • Why teststand can not display the ASCII character which number up to 128?

    Hello All,
            I have encountered a problem on an application for ASCII character,why teststand can not display the ASCII character which number up to 128?
           For example:an expression  Local.xx=Chr(164),
           xx-->string,I can not get the correct string.
           Have any idea for this?
    OS:WinXP,Teststand2012 SP1.
           Thanks a lot.
    Solved!
    Go to Solution.

    dug9000 wrote:
    [...]On Windows 7 at least, the code page setting for the operating system is located in the "Region and Language" control panel in the "Administrative" tab where it says "Language for non-Unicode programs".
    Hope this helps,
    -Doug
    Ah, that explains why i see "European Set"....
    One question, Doug: Obviously, you can select only the localization there. Is this PostScript Characters for all languages? Or is it possible to switch to something like true types, e.g. "Wingdings"? (I know, bad example, but i hope you get the point)
    thanks,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Since iOS 8 and subsequent upgrades my iPad air keeps kicking me off wi-if if Apple are aware why are they not fixing the **** thing. C'mon Apple up your game and look after your custome

    Since iOS 8 and subsequent upgrades my iPad air keeps kicking me off wi-if if Apple are aware why are they not fixing the **** thing. C'mon Apple up your game and look after your custome

    Everyone here is an end user like you, not Apple representatives. To report to Apple, please use this link:
    http://www.apple.com/feedback/ipad.html

  • Why are my Albums in the wrong order!!

    All of my albums in my itunes library are in the correct running order, likewise with my playlists. But i can't seem to get them in the right order on my new ipod. The playlists are fine. But the albums are in completely the wrong running orders in each and every one of my albums!! My ipod isn't set on Shuffle. What gives??? Is this the only way i can listen to individual albums, all jumbled up with the first track halfway through etc?? Someone please help!!!

    Hey man. Your problem is that the albums in iTunes are organized by the track number only. But when comes to iPod you must add the total number. E.g. track 1 is numbered 1. Make it 1 of what ever. In iTunes choose the album you want organize correctly. Then highlight all the tracks. Then right click one and choose Get Info. You can see under the track number you have two boxes. One for the track number and the other for the number of all tracks in the album. Just add the number of all track in that album to the second box. It fixed the problem for me & hope it does the same for you.

  • Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

    Gorgeous Hello All,
    Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
    Am using Adobe RoboHelp, Version 10 and IE version being 10.
    In my local machine :
    1.)I have completed my technical writing courtesy Design editor
    2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
    3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
    4.)Viewing Primary Layout : File -> View -> Primary Layout
    Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
    Show Stopper, At my Application Server :
    5.)I copy the entire robohelp project folder from my local machine to my application Server path
    6.)My Application has been developed in ASP .NET, Version 4.0.
    7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the  Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
    8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
    a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
    *** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
    ( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
    Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
    Cheese – Vipin Nambiar

    If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
    http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
    All along your questions have been based on webhelp, why suddenly are we going go CHMs.
    See Snippets on my site for the correct form of help to use in different scenarios.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Why are images not displaying at correct resolution in emails?

    I've just upgraded to Windows 7 (64bit).
    Thunderbird is not displaying images at the correct resolution: images that I insert into the body of an email and images used in my signature.
    The images appear larger than they should and pixelated.
    It seems that images are not displaying at the correct resolution inside my emails, whereas in other programs on my machine images are displaying correctly.
    When I insert and image into an email using insert>image, the resulting "Image Properties" window displays the image's dimensions correctly. This confirms my suspicion that the resolution is not displaying correctly inside emails (a lower resolution than elsewhere on my screen, which would explain why the images appear bigger and pixelated).
    I'd appreciate any help in fixing this problem.
    Regards,
    Catsix

    Hi Zenos,
    I've discovered what is causing the problem, but I still need a way to fix it, if possible.
    The cause of the problem is that in Windows 7 Control Panel > Display I have set the size of "text and other items" to 150% (otherwise everything is much too small too read on my screen's recommended resolution of 1920×1080).
    I discovered that Irfan Viewer was also displaying at the incorrect resolution, but I managed to solve that problem by right-clicking on the IrfanView.exe icon and following Properties > Compatibility and selecting "Disable display scaling on high DPI settings".
    I tried the same procedure with Thunderbird, but it made no difference. It is still displaying at the incorrect resolution.
    Any suggestions?
    Regards,
    Catsix

  • Why are there changes in the histogram with a convert to profile?

    When you convert an image to a different profile the color numbers change, in order for the colors to represented the same (as closely as possible given the gamut differences) in the new color space.  The histogram also changes, quite noticeably.  Why?  Is it representing the raw numbers and not their interpretation in the new space?  And if so -- why is that?  Is it of some use?
    Thanks!

    I understand that for an export operation, but still puzzled why the histograms are almost identical in LR for images that had been brought into PS from the same RAW file and converted to different spaces (with slight differences undoubtedly due to the different gamuts).   In that case, LR must be "honoring" the different color spaces, with the same appearance and histograms...  But when I soft-proof the same RAW file I get very different histograms -- the sRGB more stretched out than the ProPhoto one.  Those soft-proof histograms are "the same" (realizing they are all quick calculations) as when I do the corresponding convert to profile in PS.
    Maybe I'm not getting my head around "the histogram of the proof target."  That would be the more "dramatic" (changed) histogram I'm seeing in LR's soft proof and PS's convert to profile.  But is there a reason to show it that way?  Doesn't a histogram need to be interpreted in a color space to be meaningful?
    If I go ahead with something like a Save for Web or Export from LR in that target color space, I'll then see the histogram return to more or less what it was before (given that rendering intent has done its thing).
    Is it that the more dramatic histogram is simply representing the image in the wrong color space??  I can see that as a pragmatic decision.

  • Why does firfox not display the footer on my web site when IE9 does?

    I have made a web site, firfox does not display the whole page content... why wont it show the footer?
    http://home2.btconnect.com/kcaringagency/
    (test site)

    The footer is being displayed for me on Firefox 5.0 and 3.6.18 - to the right side of the rest of the page content.
    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Why are Verizon Nexus owners the last to get 4.0.4?

    Seems like everyone else that has a handset with the name "Nexus" is getting updated to 4.0.4. Why am I not surprised that Verizon customers are getting left out in the cold? Yes, the CDMA version is different than the GSM but **** it why the hell can't we get anything to go right with this phone. I don't care if the problem lies with Google, with Samsung, or with Verizon. I just want the ****** update pushed out so I can see if it fixes my phone. If it does, great. If it doesn't then I guess I'll enter the realm of the "Certified Pre-Owned" world.
    <word filter avoidance> you Verizon and your great network. <word filter avoidance> you Verizon and your always cheerful customer service people. If only every other part of Verizon sucked as bad as my experience with this phone then I could justify switching to another carrier.
    http://www.engadget.com/2012/03/28/android-4-0-4-rolls-out-to-hspa-galaxy-nexus-and-gsm-nexus-s/
    Message was edited by: Verizon Moderator

    fastearle86 wrote:
    You crack me up...even IF youre right....LMAO
    Who cares about Qualcomm!! Fix the phone!! Just dont know who to tell to fix the phone!!!! LMAO
    Too funny! And tragic...
    Carseller! Get the certified! Either way, you'll get covered and if it doesn't fix mine, i was promised a new model! I'm thinkin' a Razor Maxx if it comes to that....though i hope it doesn't!!
    Zzzz of course you wouldn't.  You don't know the complexities and don't care for them.  I work around these types of field and know more about the inner workings.  By the guys statement saying why are we getting is last is completely wrong as there are other devices that don't have them.

  • Why are times not displayed in Monthly view of iCalendar?

    After the last update, the times for events in the monthly view in Calendar are no longer displayed? I have checked preferences and cannot find how to get this back. It did before and I used it for my office for appointments and I need the times displayed. Does anyone have a suggestion?

    Try making the window a little bigger.  I think it truncates time for space.  I see time on mine.

  • Why are my pictures in the "All Photos" Album out of order?

    Within Albums there is an "All Photos" folder but some of the photos are out of order. How is this "All Photos" album different to the "Photos" view (which is in the correct order) and why are they not the same?

    Thanks, that's a helpfuland explanation of the difference and makes sense as all  my photos are actually  in an album (which was an event in the previous version).
    However it doesn't explain why the order in "all photos" is different.  It is not in the order that the albums are arranged, and odd photos seem randomly scattered about separated from other photos from the same album. 
    On a separate note It's also a shame as there is no way of arranging the albums chronologically (which you could do with events)

Maybe you are looking for